|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Good Place to buy Drag Helmet?
|
|
02-02-2009, 12:08 PM | #1 |
Banned
77
Rep 1,649
Posts |
Good Place to buy Drag Helmet?
Anyone have any recommendations where I can go test fit and buy a helmet for drag/road course racing this year? I've heard motorcycle shops may be the best place - but wanted to see if anyone knew of good place that sells auto-racing helmets here in the PNW.
|
02-02-2009, 12:54 PM | #2 |
Bootleggin' 'n Gunrunnin'
137
Rep 2,372
Posts |
Motorcycle helmets are acceptable for drag racing and track days, but be sure to get an "M2005" rated helmet. There are some differences with auto racing helmets, and those are rated as "S2005" or "SA05". A Snell 2000 rated helmet, either auto or motorcycle, is acceptable, but only until 2011.
Motorcycle helmets will likely be cheaper. I bought an M2005 motorcycle helmet for $100 down at Renton Motorcycles. http://www.rentonmotorcycles.com/ Pretty big selection and decent prices. For a genuine auto helmet, the only place I know is Speedware in Redmond. http://secure.speedwaremotorsports.com/index.html More expensive though, with the cheapest one being $340. But it is your head, so keep that in mind when looking at prices. I'd get the lightest helmet your budget will allow. Mine isn't too bad, supposed to be 4lbs but I haven't confirmed that. But that is an extra 4 lbs my neck needs to control. Not as big a concern with drag racing, but on a road course, that is a lot of work. I have the Scorpion EXO-200.
__________________
Scott
2024 G01 X3 M40i, Brooklyn Grey Metallic /// 2015 F15 X5 35i, Space Gray Metallic, 99K miles /// 2013 F30 320xi, Mojave Metallic, 112k miles 2019 Ford F450 STX, Oxford White 2013 Ducati Multistrada Touring S, Red |
Appreciate
0
|
Bookmarks |
|
|