[irq5]

Originally Posted by lawwailok

LOL, i rather spend my wait than $1000 on a bumper =)

I had to try...

Will definitely keep you posted as I go on this one then

[irq5]

Originally Posted by bluefly

It's coming along nice based on the recent pics. I agree that the more vertical sides will improve it. I also didn't think the fins would look as good as the non-fin version but based on those photos I prefer it!

Twin cutouts with fins for the 335i LCI is what I have high hopes for as a lower cost alternative to the m-sport rear bumper... even if we need
to wait a while lol.

Glad you're liking the looks. The cool thing about the LCI bumper is that it has a perfect recess for something like this. It will take a bit of a while, but I will definitely get onto the LCI bumper too...

[rayguy24]

looking good...can't wait for this to be ready!

[texdrake]

Quick question:

Do you plan to do the Non-335 LCI before or after you do the 335 pre-LCI

[irq5]

Originally Posted by texdrake

Quick question:

Do you plan to do the Non-335 LCI before or after you do the 335 pre-LCI

Not 100% sure actually. I think I will probably do non-335 lci first. Depends on which bumpers I can get hold of and demand really...

But non-335 lci is probably the most likely

[edirtaynine]

Originally Posted by irq5

Single side non-finned one is ready. I only have the ones that are cut as per the pics shown before in stock. If that's what you're going for I can hook you up straight away

how much for this one? and will it fit e92's?

[irq5]

Originally Posted by edirtaynine

how much for this one? and will it fit e92's?

Unfortunately it'll only fit an e90. Am going to start work on an e92 version at some point though...

[texdrake]

Still hoping for an xmas gift to myself for a 328 E90 LCI....

[cssnms]

Nice work.

A simpler option for the e90 lci would be nice too, similar to say the Hamman quad diffuser. Has a little vent and it just wraps around the tips and the bottom of the bumper, clean and simple.

[irq5]

Originally Posted by texdrake

Still hoping for an xmas gift to myself for a 328 E90 LCI....

Will hopefully have good news for you by Wednesday. But they should all definitely be ready by the end of the year

[irq5]

So... I visited the moulder this morning and we're nearly done. He's working on making sure that the fins are all identical and straight etc. and soon as he's done with that the modified parts will go back into the mould making process to produce a final moulds to work from.

All should be done on the first 3 moulds by next week Friday and we should be ready to manufacture. These will be

1. The original part - basic clip-over piece with no fins, and only one opening
2. Basic clip-over piece with no fins and two openings
3. The clip-over piece with fins and one opening.

Then work starts on the clip-over with fins and 2 openings. That piece should follow relatively quickly because once the single opening piece is done with fins, we will cast the fins from there and transfer to a part with 2 openings and no fins to create the hybrid, and then create a mould from there.

Will give you guys an update next Friday. Again, I apologise for the wait... But hopefully it'll be worth it. If all goes to plan, all four designs will be available within the next month or two.

[klove83]

So the diffuser is all done ready to buy/ship?

[irq5]

Originally Posted by klove83

So the diffuser is all done ready to buy/ship?

Unfortunately not the one you're looking for... I have 4 of the single opening, no fins one that was fitted to the car pictured a page or 2 back. The one with the sides which a lot of people wanted changed.

I'm busy working on changing the shape of the mould for the sides so that they are more straight up - rather than slanted in. This should follow the lines of the bumper better. As well as the single side opening with fins and the dual opening with fins. The single side opening with fins mould should be done by the end of the week, and then the dual side opening with fins mould will take about another 2 weeks to a month or so after that.

[ska///235i]

17 pages and 9 months......

[irq5]

Sorry guys... If I could go any faster, trust me I would!

[CobraMarty]

Is there a link to your vendor thread? I can't find it.

[irq5]

Originally Posted by CobraMarty

Is there a link to your vendor thread? I can't find it.

Hi

There is no thread open as yet. Soon as I have stock I will open one. Just checking - these parts will only fit the e90 - and you have an e92?...

Either way - will definitely post here when the thread is open.

[irq5]

As a general update to everyone. The final part with fins and changed side profiles is being moulded as we speak after the modifications we spoke of based on the fact that you guys didn't quite like the side profiles.

I've made it more straight (closer to the m-tech profile) so that it will match the lines of the car. Soon as the part is ready (within a week or so) I'll post some pics and then if all goes well I should be in a position to start supplying by mid November. Hold thumbs for me!

[wowitsk3n]

for the people who wants a 335i quad diffuser here you go! it goes straight on your OEM bumper too!
BUT for us 325,328,330's with single sides it wouldnt fit ):
I asked Mr.Cyba and he told me these only fit the 335i's and thats it.

http://www.e90post.com/forums/showthread.php?t=281932


Originally Posted by cyba
Hi

you must have pre lci 335i stock bumper for diffuser to fit.

Single Layer Titanium Blue Quads Angle Cut Roll Lip E90 Hamann Style FRP = $350 shipped. /Carbon Diffuser extra $100

Single Layer Chrome Quads Straight Cut E90 Hamann Style FRP = $250 shipped. Carbon Diffuser extra $100

Double Thin Layer Chrome Quad Tips Angle Cut E90 Hamann Style FRP = $250 /Carbon Diffuser extra $100

Regards
Derek (Cyba)

Hope this helped!
And also im really looking forward to the OP's dual side quad tips diffuser. I've been wanting to get a muffler delete with the cyba quad tips then cut my oem bumper and add the OP's diffuser!

[ska///235i]

hamann

[wowitsk3n]

Originally Posted by ska325xi

hamann

IMO hamann is a +1

[klove83]

Bump