[siuball520]

Hello,My car type is BMW 2006 E90 330i MT
I Have the code 93ab 93ac
How can i do?
Can i disable the code?
I have used e90 bypass in my car,but not work

[siuball520]

Originally Posted by BimmerGeeks

Have you tried clearing the codes?

Yes i did ,used inpa to clear,but it is not work

[oli3]

Originally Posted by siuball520

Yes i did ,used inpa to clear,but it is not work

If you clear the codes and they come back that means that you have an actual hardware fault. You need to research what the codes mean and then fix the fault.

93AB is Front Passenger Airbag
93AC is Seat Airbag Front Left

[siuball520]

Originally Posted by oli3

If you clear the codes and they come back that means that you have an actual hardware fault. You need to research what the codes mean and then fix the fault.

93AB is Front Passenger Airbag
93AC is Seat Airbag Front Left

I had try to change the front passenger airbag,vut it is not work?
Or my airbag moudles have problem?

[oli3]

Originally Posted by siuball520

I had try to change the front passenger airbag,vut it is not work?
Or my airbag moudles have problem?

Ye could be the module needs replacing

[siuball520]

Originally Posted by oli3

Ye could be the module needs replacing

Can i use the coding to solve?

[oli3]

Originally Posted by siuball520

Can i use the coding to solve?

Unlikely

[siuball520]

Originally Posted by BimmerGeeks

Yes, if you wish you can code the airbags out. But keep in mind, when you code out the physical airbag, it does not deploy in the event of a crash.

How can i do to coding the airbag moudles?

[oli3]

siuball520 you realise you'd be driving without airbags right. Potential death hazard here or what. Strongly advise you to not disable your airbags.

[siuball520]

Originally Posted by BimmerGeeks

Read the ABG module in Ncs, disable to parameters related to those codes & write the file using a manipulation-enabled profile.

my fsw.trc
https://drive.google.com/open?id=0B6...WhscHVzbjJsaTA

[siuball520]

how can i use ncs to disable?
Which code i need stop?

[S3nder]

Hi

Did u guys solved this problem ?

i have similar problem with airbag faults after I tried to code chime out

[Joe@TopGearSolutions]

Originally Posted by S3nder

Hi

Did u guys solved this problem ?

i have similar problem with airbag faults after I tried to code chime out

Default code your ABG module to reset back to factory defaults. Then, attempt the coding again, making sure you're only setting the SBR_**** values to not active.

[S3nder]

Originally Posted by Joe@TopGearSolutions

Default code your ABG module to reset back to factory defaults. Then, attempt the coding again, making sure you're only setting the SBR_**** values to not active.

i did get solved this problem thanks to bimmergeeks

[cepege4957]

sorry for the bump, but could you tell me how to code this out?
I can turn off the airbag but the lights stay on even after clearing with INPA