Auto Logic Coding (Led Lci Tail lamps)

Fortyb · 01-02-2013, 10:02 AM

My Indy shop has the auto logic but is unfamiliar with the lci tail light coding on my 2007 e92. Once he gets into the I believe it's the CIP portion where you can write what should he do next?

Fortyb · 01-02-2013, 03:52 PM

Bump

rich123321 · 01-02-2013, 04:36 PM

He needs to access the frm/nfrm depending on your year (only 1 will be available). Then just code out the bulb checks for both the left and right rear tail light. The cold, warm, and cc checks should start with kalt, warm, and cc_ respectively

Fortyb · 01-02-2013, 06:16 PM

Quote:

Originally Posted by rich123321

He needs to access the frm/nfrm depending on your year (only 1 will be available). Then just code out the bulb checks for both the left and right rear tail light. The cold, warm, and cc checks should start with kalt, warm, and cc_ respectively

Thanks.. I will make sure to inform him.

Fortyb · 01-12-2013, 08:39 PM

Just an update to this thread..I had My Taillights coded yesterday and with help over the phone from TOM@EAS i got it done. The process was enter the CIP>Retrofits and Conversions then scroll/push next for about 5 pages until you see Disable bulb check then click on CODE off bulb check and that was it...Waited 10 seconds before i unplugged the Auto logic from the car..Turned the igniton off then back on again and everything worked fine..No more blinking fast. Big Shot out to TOM for helping me with it..

rich123321 · 01-13-2013, 07:28 PM

Quote:

Originally Posted by Fortyb

Just an update to this thread..I had My Taillights coded yesterday and with help over the phone from TOM@EAS i got it done. The process was enter the CIP>Retrofits and Conversions then scroll/push next for about 5 pages until you see Disable bulb check then click on CODE off bulb check and that was it...Waited 10 seconds before i unplugged the Auto logic from the car..Turned the igniton off then back on again and everything worked fine..No more blinking fast. Big Shot out to TOM for helping me with it..

Good to hear! Congrats on the new tail lights

01-02-2013, 10:02 AM	#1
Fortyb M-GAM3 240 Rep 1,264 Posts Drives: 2016 SO M3 Join Date: Jun 2008 Location: Huntsville,Al/WHO DAT iTrader: (3)	Auto Logic Coding (Led Lci Tail lamps) My Indy shop has the auto logic but is unfamiliar with the lci tail light coding on my 2007 e92. Once he gets into the I believe it's the CIP portion where you can write what should he do next? __________________ Car Enthusiast.
	Appreciate 0 Tweet Quote

01-02-2013, 03:52 PM	#2
Fortyb M-GAM3 240 Rep 1,264 Posts Drives: 2016 SO M3 Join Date: Jun 2008 Location: Huntsville,Al/WHO DAT iTrader: (3)	Bump __________________ Car Enthusiast.
	Appreciate 0 Quote

01-02-2013, 04:36 PM	#3
rich123321 Captain 72 Rep 838 Posts Drives: BMW 325i E90 Join Date: Jan 2012 Location: South Florida iTrader: (1) Garage List 2015 335i [0.00]	He needs to access the frm/nfrm depending on your year (only 1 will be available). Then just code out the bulb checks for both the left and right rear tail light. The cold, warm, and cc checks should start with kalt, warm, and cc_ respectively
	Appreciate 0 Quote

01-12-2013, 08:39 PM	#5
Fortyb M-GAM3 240 Rep 1,264 Posts Drives: 2016 SO M3 Join Date: Jun 2008 Location: Huntsville,Al/WHO DAT iTrader: (3)	Just an update to this thread..I had My Taillights coded yesterday and with help over the phone from TOM@EAS i got it done. The process was enter the CIP>Retrofits and Conversions then scroll/push next for about 5 pages until you see Disable bulb check then click on CODE off bulb check and that was it...Waited 10 seconds before i unplugged the Auto logic from the car..Turned the igniton off then back on again and everything worked fine..No more blinking fast. Big Shot out to TOM for helping me with it.. __________________ Car Enthusiast.
	Appreciate 0 Quote