For Help with NCSExpert Errors

doogee · 04-20-2013, 03:41 PM

I'm in the process of retrofitting a TCU module into my 2006 E90. I need to turn bluetooth on but if I try to read or write the TCU I get the following error:

Here is a copy of my error log:

ERROR! Modul: A_E60TCU.IPS, Proc: StartDiagnose, LineNr: 208, ErrorNr: 2060
COAPI-2060: coding faulty (general)
TELE60_2, DIAGNOSE_MODE: ERROR_ECU_BUSY_REPEAT_REQUEST

>> ERROR! Modul: COAPI2.CPP, Proc: coapiRunCabd, LineNr: 06, ErrorNr: 2060
CODIERDATEN_LESEN

ERROR! Modul: A_E60TCU.IPS, Proc: StartDiagnose, LineNr: 208, ErrorNr: 2060
COAPI-2060: coding faulty (general)
TELE60_2, DIAGNOSE_MODE: ERROR_ECU_BUSY_REPEAT_REQUEST

>> ERROR! Modul: COAPI2.CPP, Proc: coapiRunCabd, LineNr: 06, ErrorNr: 2060
CODIERDATEN_LESEN

Any help would be greatly appreciated! Thanks! I'm using NCSExpert version 3.1.0

Also, I am able to access the TCU in INPA to pull codes and read other information.

pweber84 · 04-20-2013, 03:48 PM

Quote:

Originally Posted by doogee

I'm in the process of retrofitting a TCU module into my 2006 E90. I need to turn bluetooth on but if I try to read or write the TCU I get the following error:

Here is a copy of my error log:

ERROR! Modul: A_E60TCU.IPS, Proc: StartDiagnose, LineNr: 208, ErrorNr: 2060
COAPI-2060: coding faulty (general)
TELE60_2, DIAGNOSE_MODE: ERROR_ECU_BUSY_REPEAT_REQUEST

>> ERROR! Modul: COAPI2.CPP, Proc: coapiRunCabd, LineNr: 06, ErrorNr: 2060
CODIERDATEN_LESEN

ERROR! Modul: A_E60TCU.IPS, Proc: StartDiagnose, LineNr: 208, ErrorNr: 2060
COAPI-2060: coding faulty (general)
TELE60_2, DIAGNOSE_MODE: ERROR_ECU_BUSY_REPEAT_REQUEST

>> ERROR! Modul: COAPI2.CPP, Proc: coapiRunCabd, LineNr: 06, ErrorNr: 2060
CODIERDATEN_LESEN

Any help would be greatly appreciated! Thanks! I'm using NCSExpert version 3.1.0

Also, I am able to access the TCU in INPA to pull codes and read other information.

Too old NCS EXPER, to old SP-daten!
You need to update this all.

doogee · 04-20-2013, 03:54 PM

Quote:

Originally Posted by ******84

Too old NCS EXPER, to old SP-daten!
You need to update this all.

Any chance you can lead me in the right direction to get both updated?

dc5_champ88 · 04-20-2013, 04:07 PM

Quote:

Originally Posted by ******84

PM sent.

hey can i get the patched file and the instructions too? also the default expert profile as well

pweber84 · 04-20-2013, 04:10 PM

Quote:

Originally Posted by dc5_champ88

hey can i get the patched file and the instructions too? also the default expert profile as well

Sent.

tardmobile · 04-28-2013, 10:17 PM

Working with an e90 (07 335xi) I've been able to code in the CD Changer option and make it read MP3 CDs from the head unit (still won't see the Dension Gateway 500 but I have a suspicion I need that stupid MOST diagnostic ring to close that loop to fix this). For some reason I can't get the CAS options to work though. I'm trying to give the option to roll windows up with key fob and it throws a FSW FAULTY error at me for the CAS when I do the coapisggetfswpsw function.
I've noticed it keeps changing the CAS to cas3.c09 when I start this up, but it always says it's cas2.c05 when it reads from it. Changing that manually when kicking that function off just to see what happens throws an entirely different error like my files are out of date.

I've tried a few times with different profiles and it's not changing anything:

Quote:

ERROR! Modul: DEF_FILE.C, ProcNr: 03, LineNr: 01, ErrorNr: 62.
9600
ERROR! Modul: DEF_FILE.C, ProcNr: 03, LineNr: 01, ErrorNr: 62.
003000'01,9600d (2580h)

ERROR! Modul: COAPIIUP.CPP, Proc: coapiGetIndividFswPswFromCbd, LineNr: 02, ErrorNr: 1043
COAPI-1043: error during processing CBD-file
KMBI_PL2.C08
ERROR! Modul: IND_PER.C, ProcNr: 94, LineNr: 01, ErrorNr: 105.

>> ERROR! Modul: COAPI.CPP, Proc: coapiTraceIndividFswPsw, LineNr: 04, ErrorNr: 1141
C:\NCSEXPER\WORK\INDIVID.TRC
ERROR! Modul: IND_PER.C, ProcNr: 94, LineNr: 01, ErrorNr: 105.

>> ERROR! Modul: COAPI.CPP, Proc: coapiTraceIndividFswPsw, LineNr: 04, ErrorNr: 1141
C:\NCSEXPER\WORK\INDIVID.TRC
ERROR! Modul: DEF_FILE.C, ProcNr: 03, LineNr: 01, ErrorNr: 62.
9560
ERROR! Modul: DEF_FILE.C, ProcNr: 03, LineNr: 01, ErrorNr: 62.
003000'01,9560d (2558h)

>> ERROR! Modul: COAPIIUP.CPP, Proc: coapiGetIndividFswPswFromCbd, LineNr: 02, ErrorNr: 1043
CAS3.C09
ERROR! Modul: IND_PER.C, ProcNr: 94, LineNr: 01, ErrorNr: 105.

>> ERROR! Modul: COAPI.CPP, Proc: coapiTraceIndividFswPsw, LineNr: 04, ErrorNr: 1141
C:\NCSEXPER\WORK\INDIVID.TRC
ERROR! Modul: DEF_FILE.C, ProcNr: 03, LineNr: 01, ErrorNr: 62.
9559

ERROR! Modul: COAPI.CPP, Proc: coapiTraceFswMultiplePsw, LineNr: 05, ErrorNr: 1141
COAPI-1141: FSW faulty
C:\NCSEXPER\WORK\FSW_PSW.TRC
ERROR! Modul: DEF_FILE.C, ProcNr: 03, LineNr: 01, ErrorNr: 62.
9600
ERROR! Modul: DEF_FILE.C, ProcNr: 03, LineNr: 01, ErrorNr: 62.
003000'01,9600d (2580h)

ERROR! Modul: COAPIIUP.CPP, Proc: coapiGetIndividFswPswFromCbd, LineNr: 02, ErrorNr: 1043
COAPI-1043: error during processing CBD-file
KMBI_PL2.C08
ERROR! Modul: IND_PER.C, ProcNr: 94, LineNr: 01, ErrorNr: 105.

>> ERROR! Modul: COAPI.CPP, Proc: coapiTraceIndividFswPsw, LineNr: 04, ErrorNr: 1141
C:\NCSEXPER\WORK\INDIVID.TRC
ERROR! Modul: IND_PER.C, ProcNr: 94, LineNr: 01, ErrorNr: 105.

>> ERROR! Modul: COAPI.CPP, Proc: coapiTraceIndividFswPsw, LineNr: 04, ErrorNr: 1141
C:\NCSEXPER\WORK\INDIVID.TRC
ERROR! Modul: DEF_FILE.C, ProcNr: 03, LineNr: 01, ErrorNr: 62.
9560
ERROR! Modul: DEF_FILE.C, ProcNr: 03, LineNr: 01, ErrorNr: 62.
003000'01,9560d (2558h)

>> ERROR! Modul: COAPIIUP.CPP, Proc: coapiGetIndividFswPswFromCbd, LineNr: 02, ErrorNr: 1043
CAS3.C09
ERROR! Modul: IND_PER.C, ProcNr: 94, LineNr: 01, ErrorNr: 105.

>> ERROR! Modul: COAPI.CPP, Proc: coapiTraceIndividFswPsw, LineNr: 04, ErrorNr: 1141
C:\NCSEXPER\WORK\INDIVID.TRC
ERROR! Modul: DEF_FILE.C, ProcNr: 03, LineNr: 01, ErrorNr: 62.
9559

ERROR! Modul: COAPI.CPP, Proc: coapiTraceFswMultiplePsw, LineNr: 05, ErrorNr: 1141
COAPI-1141: FSW faulty
C:\NCSEXPER\WORK\FSW_PSW.TRC
ERROR! Modul: DEF_FILE.C, ProcNr: 03, LineNr: 01, ErrorNr: 62.
9559

ERROR! Modul: COAPI.CPP, Proc: coapiTraceFswMultiplePsw, LineNr: 05, ErrorNr: 1141
COAPI-1141: FSW faulty
C:\NCSEXPER\WORK\FSW_PSW.TRC
ERROR! Modul: DEF_FILE.C, ProcNr: 03, LineNr: 01, ErrorNr: 62.
9559

ERROR! Modul: COAPI.CPP, Proc: coapiTraceFswMultiplePsw, LineNr: 05, ErrorNr: 1141
COAPI-1141: FSW faulty
C:\NCSEXPER\WORK\FSW_PSW.TRC

As far as I know I've updated to daten v49, running on the 3.1.0 NCS Expert

I couldn't get anything to go properly before updating my daten and following the PDF more closely.

tardmobile · 04-28-2013, 10:37 PM

you know what? nevermind

Typing that post out made me stand back for a minute... I put the old CAS files back into the daten folder and now I can roll my windows up with key fob.

something about the CAS files in that v49 download just didn't agree with my car.

subieworx · 05-28-2013, 08:27 PM

Trying to access the FRM section of the ecu to get mod some lighting affects on my e91. When trying to read the ecu I get this error:

Error! Modul: LFCDHDIA.CPP (A_E65CAS.IPS/IPO), Proc: CDHapiResultText, LineNr: 01, ErrorNr: 2020 COAPI-2020: no answer from ECU
IFH-0009: ECU not connected or doesn't answer

Any input? I can read the ecu selecting CAS, but that's it. The module I want to code is not in CAS from what I can find.

nate5ks · 05-28-2013, 09:57 PM

Quote:

Originally Posted by subieworx

Trying to access the FRM section of the ecu to get mod some lighting affects on my e91. When trying to read the ecu I get this error:

Error! Modul: LFCDHDIA.CPP (A_E65CAS.IPS/IPO), Proc: CDHapiResultText, LineNr: 01, ErrorNr: 2020 COAPI-2020: no answer from ECU
IFH-0009: ECU not connected or doesn't answer

Any input? I can read the ecu selecting CAS, but that's it. The module I want to code is not in CAS from what I can find.

Is the ignition on? Jb4/procede set to stock maps?

subieworx · 05-29-2013, 11:28 AM

Ignition on. No tuning at all.

nate5ks · 05-29-2013, 05:55 PM

So you're saying you can read the cas module and get a .trc file but not the frm module

pweber · 05-30-2013, 10:23 AM

Quote:

Originally Posted by subieworx

Ignition on. No tuning at all.

Maybe try to connect with NFRM

.
What is the production date of your car?

If you can ready CAS and can't read NFRM or FRM it means that it is broken or ignition is off. CAS can be read out with Ignition off.

soursamo · 06-06-2013, 04:23 PM

Anyone have suggestions?
I can read CAS and FRM just fine, trying to turn off OC and side airbags in ABG.
Read ecu, it writes to the TRC, copy to my MAN file, change, write back.

No errors but it doesn't actually write anything, if I read the ECU again my changes are gone.

pweber · 06-06-2013, 06:23 PM

Quote:

Originally Posted by soursamo

Anyone have suggestions?
I can read CAS and FRM just fine, trying to turn off OC and side airbags in ABG.
Read ecu, it writes to the TRC, copy to my MAN file, change, write back.

No errors but it doesn't actually write anything, if I read the ECU again my changes are gone.

What profile do you use when you code using NCS expert?

soursamo · 06-07-2013, 12:46 AM

Quote:

Originally Posted by ******

What profile do you use when you code using NCS expert?

Revtors NCS Expert Profile.

pweber · 06-07-2013, 02:27 AM

Quote:

Originally Posted by soursamo

Revtors NCS Expert Profile.

I don't know what version of software do you use, but I sent you PM.

hectic · 06-09-2013, 10:12 PM

I get a "COAPI-1043: error during processing CBD-file" whenever I try to read a module (CAS, CIC, etc.). Anyone know the issue? Thanks in advance!

http://www.flickr.com/photos/93496505@N03/9003362250/

(I have to supply a link because the image wont show for some reason.)

pweber · 06-10-2013, 03:41 AM

Quote:

Originally Posted by hectic

I get a "COAPI-1043: error during processing CBD-file" whenever I try to read a module (CAS, CIC, etc.). Anyone know the issue? Thanks in advance!

http://www.flickr.com/photos/93496505@N03/9003362250/

(I have to supply a link because the image wont show for some reason.)

I assume that you use old version of NCS exper, what profile do you use?
Do you have empty FSW_PSW.man in WORK folder? It has to be empty when you read out your module.

I'm sending you the newest daten and NCS exper.

cll_cll · 06-16-2013, 06:06 PM

Didnt want to start a new post when this one is on the topic.
Ive attempted to install the coding for prelci oem xenons on my 08 e90 (build date 0907)

I only removed the wiring from my halogens and plugged the xenons in. Ive gone through the expertmode vo change pdf and the expertmode defaulting a module pdf a few times. I have been able to code the kombi for velocity display and windows up/key fob/ door unlock successfully

From what I can tell ive successfully added the $522 option to my vehicle order list in ncsexpert(fa_write to cas and nfrm) alond with following the expertmode way of defaulting a module to the vo list.
My problem lies that my nfrm does not show the pwm_anst_fl_bixenon option in the trc dump and the low beams do not light up either.
The used oem xenons do go through a bulb check (installed led ae bulbs) and i can still flash the high beams with the stalk without doing any additional coding.

Id appreciate any help and if your a coder in the o.c. let me know how much you would charge to get this working

Ive spent all my sunday morning/afternoon coding/recoding and changing from v41 to v48 to v49 datens to no avail.

Vrizrak · 06-21-2013, 07:43 PM

Just got car from service. Dealer revert software back to original. I'm trying to load NCSExpert. CAS module return this error "Following feature is invalid for FA: +KRAD". Need help please.

pweber · 06-22-2013, 05:40 AM

Quote:

Originally Posted by Vrizrak

Just got car from service. Dealer revert software back to original. I'm trying to load NCSExpert. CAS module return this error "Following feature is invalid for FA: +KRAD". Need help please.

Remove +KRAD from your VO. I even don't know what is it, but someone has added option that doesn't exist.

Unless this option does exist, but you use too old version of NCS expert and you need to update it.
I sent you PM.

Nicco · 06-30-2013, 02:17 AM

getting this error when i try and access my NFRM module. my cars E92 m3. Ive updated my files the daten v49.

04-20-2013, 03:41 PM	#111
doogee Major 748 Rep 1,256 Posts Drives: '08 M3, '09 328xi Sport Wagon Join Date: Oct 2008 Location: Ancaster, ON, Canada iTrader: (0)	I'm in the process of retrofitting a TCU module into my 2006 E90. I need to turn bluetooth on but if I try to read or write the TCU I get the following error: Here is a copy of my error log: ERROR! Modul: A_E60TCU.IPS, Proc: StartDiagnose, LineNr: 208, ErrorNr: 2060 COAPI-2060: coding faulty (general) TELE60_2, DIAGNOSE_MODE: ERROR_ECU_BUSY_REPEAT_REQUEST >> ERROR! Modul: COAPI2.CPP, Proc: coapiRunCabd, LineNr: 06, ErrorNr: 2060 CODIERDATEN_LESEN ERROR! Modul: A_E60TCU.IPS, Proc: StartDiagnose, LineNr: 208, ErrorNr: 2060 COAPI-2060: coding faulty (general) TELE60_2, DIAGNOSE_MODE: ERROR_ECU_BUSY_REPEAT_REQUEST >> ERROR! Modul: COAPI2.CPP, Proc: coapiRunCabd, LineNr: 06, ErrorNr: 2060 CODIERDATEN_LESEN Any help would be greatly appreciated! Thanks! I'm using NCSExpert version 3.1.0 Also, I am able to access the TCU in INPA to pull codes and read other information.
	Appreciate 0 Quote

04-28-2013, 10:37 PM	#117
tardmobile New Member 0 Rep 7 Posts Drives: 335xi Join Date: Apr 2013 Location: utah iTrader: (0)	you know what? nevermind Typing that post out made me stand back for a minute... I put the old CAS files back into the daten folder and now I can roll my windows up with key fob. something about the CAS files in that v49 download just didn't agree with my car.
	Appreciate 0 Quote

05-28-2013, 08:27 PM	#118
subieworx Lieutenant 30 Rep 468 Posts Drives: 07 335 Join Date: Jun 2010 Location: Ohio iTrader: (1)	Trying to access the FRM section of the ecu to get mod some lighting affects on my e91. When trying to read the ecu I get this error: Error! Modul: LFCDHDIA.CPP (A_E65CAS.IPS/IPO), Proc: CDHapiResultText, LineNr: 01, ErrorNr: 2020 COAPI-2020: no answer from ECU IFH-0009: ECU not connected or doesn't answer Any input? I can read the ecu selecting CAS, but that's it. The module I want to code is not in CAS from what I can find.
	Appreciate 0 Quote

05-29-2013, 11:28 AM	#120
subieworx Lieutenant 30 Rep 468 Posts Drives: 07 335 Join Date: Jun 2010 Location: Ohio iTrader: (1)	Ignition on. No tuning at all.
	Appreciate 0 Quote

05-29-2013, 05:55 PM	#121
nate5ks Captain 33 Rep 648 Posts Drives: 2006 BMW 330xi Join Date: Nov 2011 Location: Jacksonville Beach, FL iTrader: (0)	So you're saying you can read the cas module and get a .trc file but not the frm module
	Appreciate 0 Quote

06-06-2013, 04:23 PM	#123
soursamo Captain 161 Rep 796 Posts Drives: 2008 E92 M3 Join Date: Dec 2010 Location: BC Canada iTrader: (13)	Anyone have suggestions? I can read CAS and FRM just fine, trying to turn off OC and side airbags in ABG. Read ecu, it writes to the TRC, copy to my MAN file, change, write back. No errors but it doesn't actually write anything, if I read the ECU again my changes are gone.
	Appreciate 0 Quote

06-09-2013, 10:12 PM	#127
hectic Private First Class 9 Rep 118 Posts Drives: 335i xDrive Join Date: Aug 2012 Location: Massachusetts iTrader: (3)	I get a "COAPI-1043: error during processing CBD-file" whenever I try to read a module (CAS, CIC, etc.). Anyone know the issue? Thanks in advance! http://www.flickr.com/photos/93496505@N03/9003362250/ (I have to supply a link because the image wont show for some reason.)
	Appreciate 0 Quote

06-16-2013, 06:06 PM	#129
cll_cll New Member 0 Rep 11 Posts Drives: e90 Schwarz Join Date: Jan 2013 Location: O.C. iTrader: (1)	Didnt want to start a new post when this one is on the topic. Ive attempted to install the coding for prelci oem xenons on my 08 e90 (build date 0907) I only removed the wiring from my halogens and plugged the xenons in. Ive gone through the expertmode vo change pdf and the expertmode defaulting a module pdf a few times. I have been able to code the kombi for velocity display and windows up/key fob/ door unlock successfully From what I can tell ive successfully added the $522 option to my vehicle order list in ncsexpert(fa_write to cas and nfrm) alond with following the expertmode way of defaulting a module to the vo list. My problem lies that my nfrm does not show the pwm_anst_fl_bixenon option in the trc dump and the low beams do not light up either. The used oem xenons do go through a bulb check (installed led ae bulbs) and i can still flash the high beams with the stalk without doing any additional coding. Id appreciate any help and if your a coder in the o.c. let me know how much you would charge to get this working Ive spent all my sunday morning/afternoon coding/recoding and changing from v41 to v48 to v49 datens to no avail.
	Appreciate 0 Quote

06-21-2013, 07:43 PM	#130
Vrizrak New Member 0 Rep 15 Posts Drives: 2011 328i xDrive Join Date: Feb 2012 Location: Boston, MA iTrader: (0) Garage List 2008 BMW 535xi [0.00] 2011 BMW 328i xDrive [0.00]	Can't find a fix for this: Just got car from service. Dealer revert software back to original. I'm trying to load NCSExpert. CAS module return this error "Following feature is invalid for FA: +KRAD". Need help please. Attached Images
	Appreciate 0 Quote

06-30-2013, 02:17 AM	#132
Nicco Enlisted Member 0 Rep 43 Posts Drives: M3 Join Date: May 2013 Location: Vancouver iTrader: (0)	getting this error when i try and access my NFRM module. my cars E92 m3. Ive updated my files the daten v49. Attached Images
	Appreciate 0 Quote