[AMT92]

forgive me if there is a DIY already because i've searched and havn't found anything. how do i install new D1S bulbs in my headlights? thanks.

[Mike@F1 Autohaüs]

It's in the DIY section

http://www.e90post.com/forums/showthread.php?t=41184

[Mr.335iCoupe]

If you have the correct tools, you won't have to remove the wheel at all. Only problem is that you'll have very little room to work with. Without removing the wheel, you'll have to turn the wheel towards the side that you are working on.

[Tee212]

I tried the non wheel removal method and its dam near impossible to remove all the torx bolts on the head light cover.

[E92-Lighting]

its recommended to take the front wheels off for D1S install, DIY is available on website

[akack79]

Take the 5 mins to remove your wheel, it'll make your life much easier.

[AMT92]

wow that looks hard!

[Mike@F1 Autohaüs]

Originally Posted by akack79

Take the 5 mins to remove your wheel, it'll make your life much easier.

+1

[dvpouldar26]

I've done it many times without removing the wheel once, or jacking up the car. Just move the wheel to the opposite side. Takes me only 15 min. per side to install now. It is a tight squeeze, but with patience and the right tools, it won't be so bad.