F30 M steering wheel on E9X

RoscoI · 08-26-2015, 09:56 AM

Has anyone managed to fit the new steering wheels on the E9X, I think they are beautiful and can pick them up for about £400. But ive done quite a bit of looking and the slip rings are slightly different.

Think it would be a sick install?

RoscoI · 08-26-2015, 09:58 AM

Pic attached

NYBulldog · 08-26-2015, 08:58 PM

I looked around at the possibility but never found anyone who did it successfully. I just saved myself the trouble and went with an M3 wheel retrofit.

RoscoI · 08-27-2015, 04:28 AM

I've had a look at a lot of pictures on google of the two wheels and there is one slot in the slip ring which is different. If i had the funds i would buy one and try and fabricate it too work.

I guess until you have them both there you'll never know!

feuer · 08-29-2015, 07:48 PM

Quote:

Originally Posted by BMW..

I M P O S S I B L E

Is possible, requires know how and resources.

WreckerX5d · 08-29-2015, 08:24 PM

Quote:

Originally Posted by BMW..

I M P O S S I B L E

Almost anything is possible in the world of mechanics and electronics. Just need to know what to do and the willingness to get it done.

mashimarho · 08-29-2015, 11:32 PM

I'm sure it can be done... I mean... Someone did an e90 interior in an e36...

I just installed my Performance wheel, so I wouldn't be the one to try it.

feuer · 08-30-2015, 07:57 AM

Quote:

Originally Posted by mashimarho

I'm sure it can be done... I mean... Someone did an e90 interior in an e36...

I just installed my Performance wheel, so I wouldn't be the one to try it.

I would do just the opposite since I'm strong believer that the e36 have better dashboard layout compared to e90. I loved how the dash is driver oriented in my old e36. But this is for another thread.

RoscoI · 09-01-2015, 05:21 AM

A very 90s thing to have the driver orientated dash, all the jap coupes have something similar.

I'm surprised someone has had ago at the wheel install due to all the hype about how lovely the new wheel is!

SHEEDI · 09-06-2015, 11:33 PM

Quote:

Originally Posted by tpowerdinny

I looked around at the possibility but never found anyone who did it successfully. I just saved myself the trouble and went with an M3 wheel retrofit.

Do you have DCT M3 Steering wheel installed in 335i? I am considering doing that, I have 2009 335i E90 sport wheel "push/pull" wheel, looking to upgrade that

NYBulldog · 09-07-2015, 11:54 PM

Quote:

Originally Posted by SHEEDI

Do you have DCT M3 Steering wheel installed in 335i? I am considering doing that, I have 2009 335i E90 sport wheel "push/pull" wheel, looking to upgrade that

Worse, its on a 328xi

I made a thread about it. But I think your retrofit would be easier since you have paddles already. You'd have to do some research. On my LCI without paddles I needed a DCT wheel with its original multifunction buttons so I could avoid swapping the slip ring.

Just saw this for sale:
http://www.e90post.com/forums/showthread.php?t=1170398

SHEEDI · 09-08-2015, 07:29 AM

Quote:

Originally Posted by tpowerdinny

Worse, its on a 328xi

I made a thread about it. But I think your retrofit would be easier since you have paddles already. You'd have to do some research. On my LCI without paddles I needed a DCT wheel with its original multifunction buttons so I could avoid swapping the slip ring.

Just saw this for sale:
http://www.e90post.com/forums/showthread.php?t=1170398

Thanks

08-26-2015, 09:56 AM	#1
RoscoI Enlisted Member 4 Rep 35 Posts Drives: E92 335i MSport Join Date: Aug 2015 Location: Midlands iTrader: (0)	F30 M steering wheel on E9X Has anyone managed to fit the new steering wheels on the E9X, I think they are beautiful and can pick them up for about £400. But ive done quite a bit of looking and the slip rings are slightly different. Think it would be a sick install?
	Appreciate 0 Tweet Quote

08-26-2015, 09:58 AM	#2
RoscoI Enlisted Member 4 Rep 35 Posts Drives: E92 335i MSport Join Date: Aug 2015 Location: Midlands iTrader: (0)	Pic attached Attached Images
	Appreciate 1 Onizukachan1086.00 Quote

08-26-2015, 08:58 PM	#3
NYBulldog Specialist 1310 Rep 2,707 Posts Drives: Nikes Join Date: Jun 2010 Location: NuYawk iTrader: (19)	I looked around at the possibility but never found anyone who did it successfully. I just saved myself the trouble and went with an M3 wheel retrofit. __________________
	Appreciate 0 Quote

08-27-2015, 04:28 AM	#4
RoscoI Enlisted Member 4 Rep 35 Posts Drives: E92 335i MSport Join Date: Aug 2015 Location: Midlands iTrader: (0)	I've had a look at a lot of pictures on google of the two wheels and there is one slot in the slip ring which is different. If i had the funds i would buy one and try and fabricate it too work. I guess until you have them both there you'll never know!
	Appreciate 0 Quote

08-29-2015, 11:32 PM	#7
mashimarho BimmerPost Supporting Vendor 2111 Rep 13,877 Posts Drives: E92 M3 & F80 M3 & G82 M4 Join Date: Mar 2010 Location: Lynnwood, WA iTrader: (45) Garage List 2021 BMW G82 M4 [0.00] 2011 BMW E92 M3 [0.00] 2015 BMW F80 M3 [0.00] 2012 BMW 335i xDrive [9.78]	I'm sure it can be done... I mean... Someone did an e90 interior in an e36... I just installed my Performance wheel, so I wouldn't be the one to try it. __________________ Mashimarho.com /// Instagram /// Facebook /// Youtube /// sales@mashimarho.com /// (425) 582-7939
	Appreciate 1 Quote

09-01-2015, 05:21 AM	#9
RoscoI Enlisted Member 4 Rep 35 Posts Drives: E92 335i MSport Join Date: Aug 2015 Location: Midlands iTrader: (0)	A very 90s thing to have the driver orientated dash, all the jap coupes have something similar. I'm surprised someone has had ago at the wheel install due to all the hype about how lovely the new wheel is!
	Appreciate 0 Quote