Retrofitting CIC nav

320dlci · 11-08-2013, 12:03 PM

Hi all,

I have no nav ATM and looking to put the CIC Nav in. I have all the parts including the double hump dash, cable, nav, screen, emulator etc. Am finding it really hard who can fit this for me and get it wired/coded to car. I am located near manchester. Any1 knows any nearby who can do this?

Does any1 know the cost in getting it changed? Would it be easier/cheaper if I fit the dash and nav in and just get someone to do the wiring and coding? - this should save time?

makkan00 · 11-08-2013, 12:16 PM

There are some wirings to be connected when the dahsboard is take off. With the dashboard on, somebody will cut the corners!

I am sure that somebody will point you out somebody local to you in Manchester or relatively close.

But on London side, there are 4-5 different installers which I know.

320dlci · 11-08-2013, 12:22 PM

Quote:

Originally Posted by makkan00

There are some wirings to be connected when the dahsboard is take off. With the dashboard on, somebody will cut the corners!

I am sure that somebody will point you out somebody local to you in Manchester or relatively close.

But on London side, there are 4-5 different installers which I know.

Just Out of curiosity what are they charging down in London?

makkan00 · 11-08-2013, 12:25 PM

Quote:

Originally Posted by 320dlci

Just Out of curiosity what are they charging down in London?

If you have all the parts including the custom harnesses for display and controller then shot me a pm and I will tell you the current prices going in and around the London.
If you do not have the custom harness, then that can be created for you.

corasdad · 11-08-2013, 01:15 PM

might be worth a road trip

mob17 · 11-09-2013, 06:11 AM

Quote:

Originally Posted by corasdad

might be worth a road trip

+ 1 Mak has a proven track record. OP worth going down to see him if he can fit you in.

11-08-2013, 12:03 PM	#1
320dlci Enlisted Member 2 Rep 33 Posts Drives: 320D Lci sport Join Date: Jun 2013 Location: Bury iTrader: (0)	Retrofitting CIC nav Hi all, I have no nav ATM and looking to put the CIC Nav in. I have all the parts including the double hump dash, cable, nav, screen, emulator etc. Am finding it really hard who can fit this for me and get it wired/coded to car. I am located near manchester. Any1 knows any nearby who can do this? Does any1 know the cost in getting it changed? Would it be easier/cheaper if I fit the dash and nav in and just get someone to do the wiring and coding? - this should save time?
	Appreciate 0 Tweet Quote

11-08-2013, 12:16 PM	#2
makkan00 Major General 886 Rep 9,097 Posts Drives: F83 and F36 Join Date: Dec 2011 Location: Essex iTrader: (56)	There are some wirings to be connected when the dahsboard is take off. With the dashboard on, somebody will cut the corners! I am sure that somebody will point you out somebody local to you in Manchester or relatively close. But on London side, there are 4-5 different installers which I know. __________________ F36 Xdrive for her - HUD, park assist, heated steering wheel, rear camera, Apple car play F36 RWD for him - HK, M sports pack, GTS tail light, Apple car play
	Appreciate 0 Quote

11-08-2013, 01:15 PM	#5
corasdad Lieutenant 24 Rep 595 Posts Drives: m sport 320d Join Date: Apr 2013 Location: Lancashire iTrader: (0)	might be worth a road trip __________________ 2006 320d Msport,sunshades, remapped , strut brace, air scoops, black grills,custom exhaust , performance filter, light up gear knob ,blue led interior lights,leather wrapped dash trims, csl spoiler more to come
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search