2007 BMW 335i BETA AccessPORT Available Now!

dzenno · 06-01-2011, 10:21 AM

Quote:

Originally Posted by E90Vader

In all reality I will most likely just be waiting for COBB stage 2.
I do know that COBB stage 1 was fantastic! Blew all pre conceptions of Flash vs Piggy back out the window.. .

I wouldn't be surprised to see Stage 2 pushing 410 - 420WHP on 94 octane * WITHOUT METH *

My stage 1 COBB would pull on a JB4 - map 2 when the user just had a DCI..
Once I install the rest of my bolt ons I'll run him again and see how it is

Just sucks that it will take so long! In the end, I know it will be worth it... COBB is a fabulous tune!

410-420 on their dyno where they dynoed stage 1?

no way, look at their baseline...on a higher reading dyno, sure

...you seem to think there's some magic in tuning this car?? lol given their baseline and stage 1 numbers on the dyno they used for stage 1, stage 2 can't be more than 380-ish...they'll raise load which will raise boost about 2-3psi psi from where it is now and raise timing a bit probably maybe 1-2 deg...with proper fuel that's an extra 30-45whp on top of what they made in stage 1...

but no doubt, if its as good as stage 1 then stage 2 will also be a great tune...

mithiral67 · 06-01-2011, 11:13 AM

Has anyone gone 400+ whp on a mustange dyno running pump fuel, no meth and stock turbos?

dzenno · 06-01-2011, 01:35 PM

Quote:

Originally Posted by mithiral67

Has anyone gone 400+ whp on a mustange dyno running pump fuel, no meth and stock turbos?

no way

mithiral67 · 06-01-2011, 01:48 PM

Quote:

Originally Posted by dzenno

no way

Thats what I thought. 400 on a friendly dynojet is possible, but not on a mustange.

E90Vader · 06-01-2011, 09:43 PM

Well, basing that FBO vehicles are reading 350ish on a dynojet while having the draw back of the vehicle still trying to hit COBB's stage 1 load... I'm sure stage 2 will be well over 400.

After all, if that 350whp on the dynojet was achieved by the turbo's hitting a peak boost of 13ish PSI we should see some great numbers when they tweak it back up to 16.. I don't even hit 14PSI any more to achieve my load and that was just my straight pipes... Again I will log once I finish my FBO.

Tuner1984 · 06-01-2011, 09:47 PM

You should definitely have no problems hitting 400 hp with fbo running with cobb stage 1. My friend dynoed on a dynojet completely bone stock outside of the cobb and dynoed 360 wheel torque and 320 whp SAE Corrected.

acdHQK713K · 06-01-2011, 09:50 PM

Quote:

Originally Posted by Tuner1984

You should definitely have no problems hitting 400 hp with fbo running with cobb stage 1. My friend dynoed on a dynojet completely bone stock outside of the cobb and dynoed 360 wheel torque and 320 whp SAE Corrected.

Not a chance. DPs and FMIC are not worth 80 HP, especially with a conservative tune.

E90Vader · 06-01-2011, 11:25 PM

Quote:

Originally Posted by Tuner1984

You should definitely have no problems hitting 400 hp with fbo running with cobb stage 1. My friend dynoed on a dynojet completely bone stock outside of the cobb and dynoed 360 wheel torque and 320 whp SAE Corrected.

That is a little flawed... Issue is COBB AP was designed to hit a certain load * around 400bhp *
Adding modifications do not increase hp, they only allow you to achieve the load faster. We need COBB stage 2 to see benefits!
Mind you, COBB stock dyno's at about 320. COBB with FBO dyno's around 350. Not sure how that works yet... Still not taking full advantage of bolt ons though.

Tuner1984 · 06-02-2011, 05:52 AM

Quote:

Originally Posted by Stangorang

Not a chance. DPs and FMIC are not worth 80 HP, especially with a conservative tune.

I know they aren't worth 80 HP. I'm also including intake, exhaust, as well as a meth kit.

acdHQK713K · 06-02-2011, 10:02 AM

Quote:

Originally Posted by Tuner1984

I know they aren't worth 80 HP. I'm also including intake, exhaust, as well as a meth kit.

And again, with those additions you will not hit 400 rwhp.

bulldog_yyc · 06-02-2011, 11:02 AM

Quote:

Originally Posted by Stangorang

Not a chance. DPs and FMIC are not worth 80 HP, especially with a conservative tune.

agreed

Jeff@TopGearSolutions · 06-02-2011, 11:05 AM

You will need stage 2, ATR, or Protune to take full advantage of FBO and Meth.

Bimmeroid · 06-02-2011, 08:13 PM

Uninstalled COBB and took my car for a ride. Dont really like to lose of power, but i noticed couple of things. Stock exhaust sounds more throatier without cobb. Also, i was getting rattling noise (while accelerating) from the exhaust which is also gone since I uninstalled cobb. BTW I had 93 octane 2.02 std map. Any thoughts???

Brey335i · 06-02-2011, 08:15 PM

Quote:

Originally Posted by Bimmeroid

Uninstalled COBB and took my car for a ride. Dont really like to lose of power, but i noticed couple of things. Stock exhaust sounds more throatier without cobb. Also, i was getting rattling noise (while accelerating) from the exhaust which is also gone since I uninstalled cobb. BTW I had 93 octane 2.02 std map. Any thoughts???

Go research what the tune does with your wastegates to produce the extra boost.

Less boost = louder

Devas · 06-06-2011, 10:45 AM

Quote:

Originally Posted by Jeff@topgearsolutions

You will need stage 2, ATR, or Protune to take full advantage of FBO and Meth.

Anyone know or guess what the hardware requirements for COBB Stage 2?

Brey335i · 06-06-2011, 10:49 AM

Quote:

Originally Posted by Devas

Anyone know or guess what the hardware requirements for COBB Stage 2?

Not sure... but the last I heard was something like Stage 2 requires intercooler, and Stage 2+ requires intercooler and downpipes. Or maybe it was the other way around.

mithiral67 · 06-06-2011, 11:33 AM

Other way around.

bimmertt · 06-06-2011, 11:39 AM

Quote:

Originally Posted by Bimmeroid

Uninstalled COBB and took my car for a ride. Dont really like to lose of power, but i noticed couple of things. Stock exhaust sounds more throatier without cobb. Also, i was getting rattling noise (while accelerating) from the exhaust which is also gone since I uninstalled cobb. BTW I had 93 octane 2.02 std map. Any thoughts???

Willing to bet you have the latest software update which opens the wastegates to prevent rattling.

mithiral67 · 06-16-2011, 09:36 PM

per a post on the general cobb thread 07 is out of beta, so get you some hot non-beta 07 maps folks.

Tuner1984 · 06-17-2011, 07:57 AM

Quote:

Originally Posted by Brey335i

Not sure... but the last I heard was something like Stage 2 requires intercooler, and Stage 2+ requires intercooler and downpipes. Or maybe it was the other way around.

From reading another members post he said that Stage 2 was going to have two different settings. Once requiring a turboback exhaust and the other requiring FMIC and turboback.

AJ_335i · 02-01-2012, 07:27 PM

Will Cobb work with a 2006 335i?

nikola · 02-01-2012, 08:33 PM

If I have a Cobb AP for a Subaru STI, would I be able to download the BMW software on it? Or do I have to purchase a whole new AP?

Might be a silly question but I would appreciate an answer from you guys.

06-01-2011, 11:13 AM	#376
mithiral67 That guy 117 Rep 5,740 Posts Drives: 2015 Cayman GTS Join Date: Jun 2008 Location: Chicago Burbs iTrader: (4) Garage List 2015 Porsche Cayman ... [0.00]	Has anyone gone 400+ whp on a mustange dyno running pump fuel, no meth and stock turbos?
	Appreciate 0 Quote

06-01-2011, 09:43 PM	#379
E90Vader Banned 47 Rep 631 Posts Drives: 2007 335i Join Date: Apr 2011 Location: Calgary iTrader: (0)	Well, basing that FBO vehicles are reading 350ish on a dynojet while having the draw back of the vehicle still trying to hit COBB's stage 1 load... I'm sure stage 2 will be well over 400. After all, if that 350whp on the dynojet was achieved by the turbo's hitting a peak boost of 13ish PSI we should see some great numbers when they tweak it back up to 16.. I don't even hit 14PSI any more to achieve my load and that was just my straight pipes... Again I will log once I finish my FBO.
	Appreciate 0 Quote

06-01-2011, 09:47 PM	#380
Tuner1984 1 Stock M 76 Rep 1,650 Posts Drives: Something Slow Join Date: Jan 2010 Location: Northern Virginia iTrader: (5) Garage List 2003 E46 M3 [0.00]	You should definitely have no problems hitting 400 hp with fbo running with cobb stage 1. My friend dynoed on a dynojet completely bone stock outside of the cobb and dynoed 360 wheel torque and 320 whp SAE Corrected. __________________ Veteran USMC/Iraqi Freedom Current: E46 M3 Retired: 2009 E90 AW M3 Retired: 2007 E90 AW 335i.
	Appreciate 0 Quote

06-02-2011, 11:05 AM	#386
Jeff@TopGearSolutions 3441 Rep 79,212 Posts Drives: C6 Z06, 09 335i, 10 335xi Join Date: Dec 2008 Location: www.TopGearSolutions.com iTrader: (37)	You will need stage 2, ATR, or Protune to take full advantage of FBO and Meth.
	Appreciate 0 Quote

06-02-2011, 08:13 PM	#387
Bimmeroid Private 6 Rep 89 Posts Drives: 2016 F83 Join Date: Oct 2010 Location: NoVa, USA iTrader: (0)	Uninstalled COBB and took my car for a ride. Dont really like to lose of power, but i noticed couple of things. Stock exhaust sounds more throatier without cobb. Also, i was getting rattling noise (while accelerating) from the exhaust which is also gone since I uninstalled cobb. BTW I had 93 octane 2.02 std map. Any thoughts??? __________________ 2016 F83//DCT//Mineral White Metallic on Sakhir Orange
	Appreciate 0 Quote

06-06-2011, 11:33 AM	#391
mithiral67 That guy 117 Rep 5,740 Posts Drives: 2015 Cayman GTS Join Date: Jun 2008 Location: Chicago Burbs iTrader: (4) Garage List 2015 Porsche Cayman ... [0.00]	Other way around.
	Appreciate 0 Quote

06-16-2011, 09:36 PM	#393
mithiral67 That guy 117 Rep 5,740 Posts Drives: 2015 Cayman GTS Join Date: Jun 2008 Location: Chicago Burbs iTrader: (4) Garage List 2015 Porsche Cayman ... [0.00]	per a post on the general cobb thread 07 is out of beta, so get you some hot non-beta 07 maps folks.
	Appreciate 0 Quote

02-01-2012, 07:27 PM	#395
AJ_335i Enlisted Member 1 Rep 45 Posts Drives: 2006 BMW 335i E92 Join Date: Sep 2010 Location: Melbourne, Australia iTrader: (0)	Will Cobb work with a 2006 335i?
	Appreciate 0 Quote

02-01-2012, 08:33 PM	#396
nikola New Member 4 Rep 23 Posts Drives: 2007 BMW 335i Join Date: Apr 2011 Location: Atlanta iTrader: (0)	If I have a Cobb AP for a Subaru STI, would I be able to download the BMW software on it? Or do I have to purchase a whole new AP? Might be a silly question but I would appreciate an answer from you guys.
	Appreciate 0 Quote