E92 Tyre Pressure Loss warning

cwd · 12-01-2013, 05:02 AM

Hi guys,

I had the Tyre Pressure Loss warning when I was driving yesterday, checked it roughly and nothing's obvious, so I drove to petrol station to check properly and found my rear left is only 23psi and the rest are still okay.

So I filled it, checked it again today and it's still fine, so I assume it's all good for no until I have the time to bring the car to tyre shot to get it checked for punctures.

Tried the reset instruction (found instructions here http://www.pelicanparts.com/BMW/tech...Monitoring.htm)

I can NOT find the 'reset' on the bottom screen

I can see the tyre warning icon on the top screen but no reset option on bottom screen, did I miss a step?

Cheers.

bimmerla · 12-01-2013, 01:13 PM

Does your car have iDrive?

Also it may not be a puncture, could be a small crack inside the rim

cwd · 12-01-2013, 07:41 PM

Yes it does, can we reset via iDrive?

Zen · 12-01-2013, 10:19 PM

Quote:

Originally Posted by cwd

Yes it does, can we reset via iDrive?

Yes, u can reset the tire pressure via idrive. It's done thru the vehicle settings menu by pressing the idrive controller.

cwd · 12-02-2013, 01:15 AM

Quote:

Originally Posted by Zen

Yes, u can reset the tire pressure via idrive. It's done thru the vehicle settings menu by pressing the idrive controller.

If it's not too much to ask, can you please let me know the steps to get rid of the warning via iDrive?

DR-JEKL · 12-02-2013, 02:42 AM

by memory you go under info in the idrive, then vehicle settings, tyre pressure and then reset.

Also if i recall correctly you have to reset whilst you're driving the car so it can recalibrate.

Zen · 12-02-2013, 02:58 AM

Quote:

Originally Posted by cwd

If it's not too much to ask, can you please let me know the steps to get rid of the warning via iDrive?

Quote:

Originally Posted by DR-JEKL

by memory you go under info in the idrive, then vehicle settings, tyre pressure and then reset.

Also if i recall correctly you have to reset whilst you're driving the car so it can recalibrate.

Pretty much what DR-JEKL had said. To begin the reset, your vehicle will have to be stationary first (duh!

), once u have resetted it, then u just drive off slowly to have the tpms finish its recalibration. It should say "Active" within the TPMS screen that once the tpms had finished its recalibration.

CYL · 12-03-2013, 12:58 AM

Mine is 325i with iDrive.
I have done mine via iDrive menu with my car stationary throughout the whole process.
Hope that helps.

12-01-2013, 05:02 AM	#1
cwd New Member 2 Rep 9 Posts Drives: BMW e92 325i Join Date: Nov 2013 Location: Melb, AUS. iTrader: (0)	E92 Tyre Pressure Loss warning - how to reset Hi guys, I had the Tyre Pressure Loss warning when I was driving yesterday, checked it roughly and nothing's obvious, so I drove to petrol station to check properly and found my rear left is only 23psi and the rest are still okay. So I filled it, checked it again today and it's still fine, so I assume it's all good for no until I have the time to bring the car to tyre shot to get it checked for punctures. Tried the reset instruction (found instructions here http://www.pelicanparts.com/BMW/tech...Monitoring.htm) I can NOT find the 'reset' on the bottom screen I can see the tyre warning icon on the top screen but no reset option on bottom screen, did I miss a step? Cheers.
	Appreciate 0 Tweet Quote

12-01-2013, 01:13 PM	#2
bimmerla New Member 0 Rep 15 Posts Drives: E92 325i Join Date: Aug 2012 Location: Sydney iTrader: (0)	Does your car have iDrive? Also it may not be a puncture, could be a small crack inside the rim
	Appreciate 0 Quote

12-01-2013, 07:41 PM	#3
cwd New Member 2 Rep 9 Posts Drives: BMW e92 325i Join Date: Nov 2013 Location: Melb, AUS. iTrader: (0)	Yes it does, can we reset via iDrive?
	Appreciate 0 Quote

12-02-2013, 02:42 AM	#6
DR-JEKL Major General 898 Rep 6,285 Posts Drives: Space Grey E92 335i 6MT Join Date: Jul 2012 Location: Newcastle Ozstraylia iTrader: (3)	by memory you go under info in the idrive, then vehicle settings, tyre pressure and then reset. Also if i recall correctly you have to reset whilst you're driving the car so it can recalibrate.
	Appreciate 0 Quote

12-03-2013, 12:58 AM	#8
CYL Major 129 Rep 1,382 Posts Drives: E92 Join Date: Aug 2013 Location: Australia iTrader: (0)	Mine is 325i with iDrive. I have done mine via iDrive menu with my car stationary throughout the whole process. Hope that helps.
	Appreciate 0 Quote