adaptation time for V3

trapper · 07-11-2008, 09:52 AM

I have been running a V3 in a otherwise stock 135 6MT and all was good. I added the twin filter set-up and loaded map 1 (doomsday) last night. No limps and am running good fuel (shell with a few gallons of 100 octane camII) So far driven about 50 miles or so and the car feels de-tuned...it just does not pull as hard. The V3 that I have is the later one with clear relay. Was the map that came in the V3 a non doomsday 0 stage? BTW ,my car has V80 and as far as I know does not have 29.2. Bought in late April and have not returned to dealer. I have searched and get mixed messages about battery unhook....do I need to go stage 1 non-doomsday?...unhook batt to speed up adapt ?? or just do some more pulls and wait and see if the TQ comes back? First post but i have lurked long time....thanks

e90AW335i · 07-11-2008, 09:53 AM

Quote:

Originally Posted by trapper

I have been running a V3 in a otherwise stock 135 6MT and all was good. I added the twin filter set-up and loaded map 1 (doomsday) last night. No limps and am running good fuel (shell with a few gallons of 100 octane camII) So far driven about 50 miles or so and the car feels de-tuned...it just does not pull as hard. The V3 that I have is the later one with clear relay. Was the map that came in the V3 a non doomsday 0 stage? BTW ,my car has V80 and as far as I know does not have 29.2. Bought in late April and have not returned to dealer. I have searched and get mixed messages about battery unhook....do I need to go stage 1 non-doomsday?...unhook batt to speed up adapt ?? or just do some more pulls and wait and see if the TQ comes back? First post but i have lurked long time....thanks

It feels de-tuned because you went from a non-doomsday to a doomsday map. Go get the doomsday stage 1 map and load it up....

Make sure you have a v80 before you do this....

trapper · 07-11-2008, 09:57 AM

Thanks, thats what I was going to try next. It was late last night and I made a choice to go doomsday I do have V80. Great info here. Glad to be onboard!

kentgbr · 07-11-2008, 10:06 AM

Quote:

Originally Posted by e90AW335i

It feels de-tuned because you went from a non-doomsday to a doomsday map. Go get the doomsday stage 1 map and load it up....

Make sure you have a v80 before you do this....

Can you clarify? It sounds like he already tried this unless the doomsday map used was a stage 0.

e90AW335i · 07-11-2008, 10:17 AM

Quote:

Originally Posted by kentgbr

Can you clarify? It sounds like he already tried this unless the doomsday map used was a stage 0.

Quote:

Originally Posted by trapper

I have been running a V3 in a otherwise stock 135 6MT and all was good. ..... Was the map that came in the V3 a non doomsday 0 stage?

The map he had before was Stage 0 non-doomsday, he then loaded Stage 1 doomsday thus his car felt and was de-tuned compared to his first map....

JohnL135I · 07-11-2008, 10:31 AM

you need to load the NON-DOOMSDAY Map. I made this mistake when I installed my updated harness. My car ran STOCK 1/4(actually worse than stock) mile times with the doomsday map. It was my mistake. I uploaded the NON DOOMSDAY map and Baaam, super POWER!!!

kentgbr · 07-11-2008, 10:33 AM

Quote:

Originally Posted by e90AW335i

The map he had before was Stage 0 non-doomsday, he then loaded Stage 1 doomsday thus his car felt and was de-tuned compared to his first map....

That's what I thought but you advised him to load the same map he already has, typo maybe?

trapper · 07-11-2008, 11:14 AM

Good to know. If theres this much difference for the V81 guys I am so glad to have the V80! Cant wait to get home to change this. Thank you for this forum! I Was not expecting a big bump in power from the twin air filters (mostly noise) but I did not expect to go slower. Its slower for sure. The good news is it will be eaisier this time after doing once .I have the RR downpipes in the box waiting for the 3" exhaust to add at same time. I am new to turbos but not new to hot rods. Most of mine had carbs,..turbos rock!

slubu · 07-11-2008, 11:15 AM

Quote:

Originally Posted by JohnL135I

you need to load the NON-DOOMSDAY Map. I made this mistake when I installed my updated harness. My car ran STOCK 1/4(actually worse than stock) mile times with the doomsday map. It was my mistake. I uploaded the NON DOOMSDAY map and Baaam, super POWER!!!

what the hell are doomsday maps that bad?

sflgator · 07-11-2008, 11:16 AM

Quote:

Originally Posted by slubu

what the hell are doomsday maps that bad?

Reduced boost and TQ for invisibility to new DME & s/w.

e90AW335i · 07-11-2008, 11:21 AM

Quote:

Originally Posted by kentgbr

That's what I thought but you advised him to load the same map he already has, typo maybe?

Yep, my bad....

Load the NON-Doomsday Stage 1

arter · 07-11-2008, 01:53 PM

Yes currently the V3 Doomsday map has less horsepower than a Dinan stage 2 tune until you get to the very top end ( > 5500 rpm).

and this is using dyno data that e90AW335i and Shiv have published.

Maybe Shiv will play with fluid pump pressure ( or go above fuel trims of 10%).

slubu · 07-11-2008, 04:48 PM

Quote:

Originally Posted by arter

Yes currently the V3 Doomsday map has less horsepower than a Dinan stage 2 tune until you get to the very top end ( > 5500 rpm).

and this is using dyno data that e90AW335i and Shiv have published.

Maybe Shiv will play with fluid pump pressure ( or go above fuel trims of 10%).

So SSTT and V3 Doomsday run about the same torque?

OpenFlash · 07-11-2008, 04:54 PM

Quote:

Originally Posted by slubu

So SSTT and V3 Doomsday run about the same torque?

Nope. Current v3 Doomsday maps have been juiced up slightly from early versions. Regarding the chart, cool work. Just wondering why it only goes up to 6000rpm and not 6500-7000rpm.

Shiv

arter · 07-11-2008, 06:47 PM

Quote:

Originally Posted by shiv@vishnu

Nope. Current v3 Doomsday maps have been juiced up slightly from early versions. Regarding the chart, cool work. Just wondering why it only goes up to 6000rpm and not 6500-7000rpm.

Shiv

Yeap, sorry about that as some of the tunes like V3 and JB2R continue to rise
( although I have their max hp and torques in the the chart titles).

I have a just delivered car ( thus v81) and have been looking at what to use with it so dinan and V3 Doomsday have been what I have been studying.
I expected you will continue to work on the Doomsday, but have not yet seen dyno data from where you are now.

themonotron · 07-11-2008, 07:20 PM

I'm running v80, with 29.2, map 1 doomsday with dual intake and it definitely feels a lot slower than the regular v2 maps. When will we know if we can increase the tq without dealer detection via 29.2? I'm eager to get some of the torque back.

MNR0 · 07-14-2008, 09:54 PM

What happens if a dealer detects a piggy back? After all, its your car...

I thought BMW cannot void any warranty claim unless it is atributable to a non-factory modification. So the dealer cannot void warranty just cause ur car runs an interceptor.

BMWeber · 07-15-2008, 02:37 PM

doesn't camII have lead in it?

trapper · 07-15-2008, 04:11 PM

The pump has UNLEADED stamped all over it. The same station also has 110 octane leaded fuel for those that can use it. I have used fuel from these guys for years. I have a C-5 for track play that needs this fuel. I am not convinced the N54 has to have it. Or runs much better with it. Placebo effect?? Depends on who you ask. I do know that the Non-doomsday map sure pulls harder than the doomsday map does. I have not had a chance to use Shivs latest work but plan to try it soon. I also have DPs from RR waiting to try. I have the 135 so for the rest of exhaust theres not much to pick from so far...may go the custom route.

john335 · 07-15-2008, 04:23 PM

what happens if you run the stage 2 map and you still have 2 front cats and standard airfilter and standard dp's?

07-11-2008, 09:52 AM	#1
trapper New Member 0 Rep 12 Posts Drives: 135 6MT Join Date: Jul 2008 Location: southeast iTrader: (0)	adaptation time for V3 I have been running a V3 in a otherwise stock 135 6MT and all was good. I added the twin filter set-up and loaded map 1 (doomsday) last night. No limps and am running good fuel (shell with a few gallons of 100 octane camII) So far driven about 50 miles or so and the car feels de-tuned...it just does not pull as hard. The V3 that I have is the later one with clear relay. Was the map that came in the V3 a non doomsday 0 stage? BTW ,my car has V80 and as far as I know does not have 29.2. Bought in late April and have not returned to dealer. I have searched and get mixed messages about battery unhook....do I need to go stage 1 non-doomsday?...unhook batt to speed up adapt ?? or just do some more pulls and wait and see if the TQ comes back? First post but i have lurked long time....thanks
	Appreciate 0 Tweet Quote

07-11-2008, 09:57 AM	#3
trapper New Member 0 Rep 12 Posts Drives: 135 6MT Join Date: Jul 2008 Location: southeast iTrader: (0)	Thanks, thats what I was going to try next. It was late last night and I made a choice to go doomsday I do have V80. Great info here. Glad to be onboard!
	Appreciate 0 Quote

07-11-2008, 10:31 AM	#6
JohnL135I Donkey Kong King 89 Rep 1,129 Posts Drives: 2012 Boss 302 Join Date: Dec 2007 Location: Sahuarita, AZ iTrader: (3)	you need to load the NON-DOOMSDAY Map. I made this mistake when I installed my updated harness. My car ran STOCK 1/4(actually worse than stock) mile times with the doomsday map. It was my mistake. I uploaded the NON DOOMSDAY map and Baaam, super POWER!!!
	Appreciate 0 Quote

07-11-2008, 11:14 AM	#8
trapper New Member 0 Rep 12 Posts Drives: 135 6MT Join Date: Jul 2008 Location: southeast iTrader: (0)	Good to know. If theres this much difference for the V81 guys I am so glad to have the V80! Cant wait to get home to change this. Thank you for this forum! I Was not expecting a big bump in power from the twin air filters (mostly noise) but I did not expect to go slower. Its slower for sure. The good news is it will be eaisier this time after doing once .I have the RR downpipes in the box waiting for the 3" exhaust to add at same time. I am new to turbos but not new to hot rods. Most of mine had carbs,..turbos rock!
	Appreciate 0 Quote

07-11-2008, 01:53 PM	#12
arter collecting toys 41 Rep 810 Posts Drives: M3 MCB Join Date: May 2008 Location: rochester, ny iTrader: (1)	Yes currently the V3 Doomsday map has less horsepower than a Dinan stage 2 tune until you get to the very top end ( > 5500 rpm). and this is using dyno data that e90AW335i and Shiv have published. Maybe Shiv will play with fluid pump pressure ( or go above fuel trims of 10%). Attached Images __________________ 2011 e92 M3 Monte Carlo Blue ESS 535 - gone but not forgotten 2015 cayman GTS - new toy 2006 SLK 55 AMG sold
	Appreciate 0 Quote

07-11-2008, 07:20 PM	#16
themonotron Private First Class 2 Rep 163 Posts Drives: 09 E92 M3 AW Join Date: Jan 2007 Location: CA iTrader: (0)	I'm running v80, with 29.2, map 1 doomsday with dual intake and it definitely feels a lot slower than the regular v2 maps. When will we know if we can increase the tq without dealer detection via 29.2? I'm eager to get some of the torque back.
	Appreciate 0 Quote

07-14-2008, 09:54 PM	#17
MNR0 Private First Class 3 Rep 152 Posts Drives: 335i (also own an LS1) Join Date: Oct 2007 Location: AUSTRALIA iTrader: (0)	What happens if a dealer detects a piggy back? After all, its your car... I thought BMW cannot void any warranty claim unless it is atributable to a non-factory modification. So the dealer cannot void warranty just cause ur car runs an interceptor.
	Appreciate 0 Quote

07-15-2008, 02:37 PM	#18
BMWeber Major 36 Rep 1,329 Posts Drives: 08 135i Join Date: Sep 2007 Location: Amesbury, MA iTrader: (5)	doesn't camII have lead in it?
	Appreciate 0 Quote

07-15-2008, 04:11 PM	#19
trapper New Member 0 Rep 12 Posts Drives: 135 6MT Join Date: Jul 2008 Location: southeast iTrader: (0)	unleaded The pump has UNLEADED stamped all over it. The same station also has 110 octane leaded fuel for those that can use it. I have used fuel from these guys for years. I have a C-5 for track play that needs this fuel. I am not convinced the N54 has to have it. Or runs much better with it. Placebo effect?? Depends on who you ask. I do know that the Non-doomsday map sure pulls harder than the doomsday map does. I have not had a chance to use Shivs latest work but plan to try it soon. I also have DPs from RR waiting to try. I have the 135 so for the rest of exhaust theres not much to pick from so far...may go the custom route.
	Appreciate 0 Quote

07-15-2008, 04:23 PM	#20
john335 Private 6 Rep 83 Posts Drives: E92 M3 Alpine White Join Date: Mar 2007 Location: N.Ireland iTrader: (0)	what happens if you run the stage 2 map and you still have 2 front cats and standard airfilter and standard dp's? __________________ Alpine White E92 M3, 19", Black Grilles
	Appreciate 0 Quote