[pits200]

Originally Posted by creaminz

poor eric... lost his car again...at least HPF gurantees something good for N54/55 community!

I agree. Poor guy.

[AYF80]

I'll be ok.

[D_Smiderreen]

Originally Posted by HPF 335i #1

I'll be ok.

Thanks for taking one for the team, I know the wait will be well worth it. Any clues on project completion date?

[Laguna Seca Blue]

I'm sorry, but I feel really bad for you, Eric. What has it been, 3 years?

Its time for a reality check. If they haven't figured out how to properly build and tune a 335i single turbo by now, it's never going happen. Eric, you seem like a wonderful guy, but there has to be a limit to how much you're willing to put up with. Get your car back, and demand some serious compensation. I think three years of depreciation is worth at least 1 800hp E46 M3

[AYF80]

All I know is that I'm promised my car will be in my Drive way before I get back from my current deployment, and their goal is 600 WHP on pump only. So I'd say, May. But that's for further development past stage 1-2. The kits, stage 1-2 should be done before that.

As for as compensation, I'm sure Chris plans on contacting me soon in regards to that. However, all I can say at this point is that my wallet is not being effected by this situation. But I do agree that I now have an old car with little drive time. And yes, I'm currently less than satisfied with the current progress when compared to time given.

A lot has also been discussed over phone and by email between HPF and I. But again all i will say is that, if HPF was not taking care of me and making me feel comfortable, I would let them know and leave.

Chris and Josh are great guys, my "contract" has changed over the years, and I'm sure it will reach its last phase over the next few months. I trust HPF as a team to make me happy in the end.

[Sigma 3]

Originally Posted by turugara

What I find impressive is the HPF turnaround time. If those numbers are upheld where the different stages are installed as quickly as they said and HPF offers financing + one way shipping, they are going to KILL it. Once they get into the 335/135 market with that type of customer service, assuming its true, they will be HUGE for this community.\

Many other companies could take a leaf out of their book if HPF is actually able to deliver on their promises.

You dont have to assume anything. Remember way back when when Chris said they where done developing on the e46 platfrom and would be focusing all his recources on the 335... ummm... welll.... the drag car turned out really nice... oops e46. But hey there is always the road car they are working .... ummm... hey at least there is a cool new hood coming out for the e46!!!!

[HPF Chris]

Originally Posted by HPF 335i #1

All I know is that I'm promised my car will be in my Drive way before I get back from my current deployment, and their goal is 600 WHP on pump only. So I'd say, May. But that's for further development past stage 1-2. The kits, stage 1-2 should be done before that.

As for as compensation, I'm sure Chris plans on contacting me soon in regards to that. However, all I can say at this point is that my wallet is not being effected by this situation. But I do agree that I now have an old car with little drive time. And yes, I'm currently less than satisfied with the current progress when compared to time given.

A lot has also been discussed over phone and by email between HPF and I. But again all i will say is that, if HPF was not taking care of me and making me feel comfortable, I would let them know and leave.

Chris and Josh are great guys, my "contract" has changed over the years, and I'm sure it will reach its last phase over the next few months. I trust HPF as a team to make me happy in the end.

We sent off the intake manifold to production. Woo hoo!! And Doc Race has the turbo manifold to be modified to work with the Vishnu system where the front and rear banks must be kept separate. Now we are pounding on Doc Race to fit it into their production schedule

335i Exhaust Systems are now In Stock!!!!

335i and 135i exhausts are in!! We’ll be sending them out to polishing and should be ready to fill any backorders early next week or any new orders (since we will have left overs!).

[nafoo]

Any pictures of the intake manifold sent to production?

[AYF80]

Yeah, I cant wait to see it... Maybe Josh will send me a pic if i promise not to post it?

I know that it was also supposed to be designed to support Twin Scroll, Im very interested to see the new and fresh "take two" design.

[hemi to e90]

what no video update posted to e90post about the same product and no or little updates for e9xs?

im personally shocked.

[jetblackcoupe]

out of the 25 people that got this, is there ANYONE with catless downpipes and a video camera?!?!?!?!?!?!?!?

[Sered]

LOL. YOU AGAIN! Is it always you and I lurking around for HPF Gen IIs on a catless-dp setup?