[ashmostro]

Just tried running the INPAload airbag test, and after I clicked on airbag, I got this message:



Both Battery and Ignition are lit, per the NCS DIY instructions...

[polaris_tr]

Hello;

My car is 2006 E90.All inpa cable is od 3/2007 for E90.I cant find for 2006.So whic cable I have to use for my car?Anybody can help me please...

Thanks...

[dbworld4k]

I setup my software to work with E89 files for my E92.

What's the procedure for being able to read/code other chassis too (ie. E39/E46/E60)? Do I just copy the IPO files from the downloaded SPDaten folder into \NCSExper\SGDAT\E39 + Daten files into \NCSEXPER\DATEN\E39 + PRG files into \EDIABAS\Ecu\E39 or is there something more to this?

[Ice Masta]

Hi all,

i tried many different ways to clear the same error on my E90 2005 BMW 320i - no luck what so ever
Tried INPA to clear - it says cleared but nothing happens
Tried NCS to disable - but no luck either - i coudint find SBE1_1_CD under the module ABG only SBE1_1 is avaialble

any help at all is much appreciated

thanks

[Ice Masta]

Originally Posted by cryptomit

I meant that you don't need stupid Virtual Machine to make it run on Windows 7/8 32 and 64 bit.

I sent you a Dropbox link.

I also write how to recode module to reset it and bring to default settings. You need to use EXPERTMODUS to do it, the profiles are included there.

Hi all,

i tried many different ways to clear the same error on my E90 2005 BMW 320i - no luck what so ever
Tried INPA to clear - it says cleared but nothing happens
Tried NCS to disable - but no luck either - i coudint find SBE1_1_CD under the module ABG only SBE1_1 is avaialble

any help at all is much appreciated

thanks

Also i've just installed all the latest version of INPA and NCS and NCS dummy and datan 50 for E89 as well - all ready to test if some one can tell me what codes should i disable in what module

Secondly what if i want to change all modules back to factory settings just in-case if i muck it up

Cheers in advance


can you send me the profile and coding with instructions to bring the modules to default if i muck it up -

[Opo]

Originally Posted by mrtanz

Out of interest have you tried making the following nicht_activ

KALTUEBERWACHUNG_BFD_L
aktiv
KALTUEBERWACHUNG_BFD_R
aktiv

WARMUEBERWACHUNG_BFD_L
aktiv
WARMUEBERWACHUNG_BFD_R
aktiv
I know this is for brakeforce but give it a try anyway
I have had a similar issue when coding another car a while ago

Originally Posted by cryptomit

Try what mrtanz said.

Sorry for my extremely delayed response, I was insanely busy with work and then I was out-of-country for a week.

I just tried this, and unfortunately the errors STILL persist, I have attached my updated file.

Any other ideas/things I can try?

[Mdriv3r]

Does this only work with Windows?

[dbworld4k]

Originally Posted by dbworld4k

I setup my software to work with E89 files for my E92.

What's the procedure for being able to read/code other chassis too (ie. E39/E46/E60)? Do I just copy the IPO files from the downloaded SPDaten folder into \NCSExper\SGDAT\E39 + Daten files into \NCSEXPER\DATEN\E39 + PRG files into \EDIABAS\Ecu\E39 or is there something more to this?

Anyone?

[ramez75]

Hi,

I have been having difficulty getting my rear sunblind retrofit to work (turning from a simple PnP to a complex project). I checked all the hardware, rear sunblind motor, wiring harness etc. and all seems to work properly when plugged to a 12V battery.

Of course when I plug the pin-contacts of the wiring harness to PIN3 & PIN30 into the junction box and press the sunblind button on the center console switch panel nothing happens (A friend of mine did code the car for me, by adding the VO $415 to the appropriate modules; I am hoping he didn't miss anything).

I looked at the fuse box and noticed that I don't have any mentioning of the sunblind fuse/slot. A friend of mine checked his and said its SLOT 63 (I have fuse there).

So this lead me to believe and with the assumption that the coding is done correctly, it might be my car is not capable to be retrofitted with a rear sunblind (as stupid as it sounds and my manufacture date is Jan 2009).

SO MY QUESTION IF I BUY JUNCTION BOX THAT HAD THE SUNBLIND OPTION AND REPLACE THE ONE I HAVE DO I NEED TO CODE THE CAR OR IS IT A DIRECT SWAP (Plug N Play kinda thing).

Its getting frustrating coz this should have been a very simple retrofit project and I cant find any literature or someone running into the same issue I have been.

Any feedback, guidance, ideas are greatly appreciated

Thank you

RB

[Villanofun]

Originally Posted by titangodgamer12

excuse me, but where can i download the files? The links are broken!

I would like to echo this.

[FONZIMACBOOKPRO]

anyone code in san diego california let me know area code is 92104 want to make my mirrors and windows close with fob

[FONZIMACBOOKPRO]

Originally Posted by premo

Does this only work with Windows?

was thinking the same thing wish it would work with mac

[Villanofun]

Originally Posted by FONZIMACBOOKPRO

was thinking the same thing wish it would work with mac

You could just install parallels?

[joepcrepairs2]

Originally Posted by FONZIMACBOOKPRO

anyone code in san diego california let me know area code is 92104 want to make my mirrors and windows close with fob

whenever you are around l.a or o.c hit me up ill help you

[Mdriv3r]

Cheap coding and OBD II Method with iphone.


BMWhat App and bluetooth/wifi ob2 Review http://www.m3post.com/forums/showthread.php?t=938276

[Jamrockbwoy]

Originally Posted by xxxjecxxx

Finally here we go!

This assumes that you are using an OBD port, to use other adapters you will have to edit ediabas.ini

LINK FOR CABLE http://www.carparts-sale.com/new-edi...face-p-34.html

all files needed are in ncsexpert.rar and DIY is a pdf as a separate file! enjoy!

http://rapidshare.com/files/429882289/NCSEXPER.rar all files needed

http://rapidshare.com/files/429875523/NCS_DIY.pdf DIY

http://forums.5series.net/topic/1060...g/page__st__15 coding examples

http://translate.google.com/#de|en| this will be your best friend

I was going to turn coding into a part time job because I could really use the extra cash but I am providing all my work free of charge, if you find it helpful in any way please donate to the following link.

https://www.paypal.com/cgi-bin/websc...if%3aNonHosted

Does this method still work? and will it work for a 2010 328i xDrive LCI

[WilliamS]

The DIY is gone? Is it hosted somewhere else?

[snaimpally]

Can someone please re-upload?

[Shahaed]

Is this thread still alive? Need help coding

[wildcatcrazy]

Originally Posted by Shahaed

Is this thread still alive? Need help coding

I can help romotely.

[850CSi]

Is there any real reason to stick with K DCAN + NCS with BMWhat out there?

I just bought an E61 and now since I have two bimmers I figure I might as well start doing my coding myself.

[Colossuss]

Originally Posted by snaimpally

Can someone please re-upload?

+1

Can someone reupload a version of INPA that works with a 335i, or pm me a link? Cheers!