[Pseudo Nim]

Guys, there is already a forum with quite a few threads on it (see my sig). Just throwing it out there. There's people there who help out, too (in fact, some of the e90post members who code post there as well).

[luigi42]

Anyone have any luck enabling SMS (PHONE_SMS) or the Notepad (NOTEPAD_CIC) feature inside CIC? In the case of the Notepad, the option appeared on menu, but when selected it doesn't appear to do anything. Thanks

[Neutrino45]

Pseudo Nim, oh ok. LOL Sorry that I missed it. For some reason outie's signature is more visable. I'll add the other forum to my sig and sheet as well since E90Post doesn't want to create a section for us...

[spera23]

Hopefully you will be help me out with one more...

I was able to disable the orange LED's as the DRL's and worked fine. Now I am trying to disable the same orange LED's this time when they are on with the regular headlights at night.

The spread sheet lists:

FRM PWM_FL_ALS_CORNERLIGHT
NFRM PWM_POL_BEI_AKTIVEN_AL
NFRM PWM_POL_BEI_AKTIVEN_FL
NFRM SL_FKT_MIT_POL

I only have the first parameter in my modules and it is already set to "wert_02" which the spread sheet says to set it to.

Unfortunately the LED's are still on, and im not sure what else to try.

Any ideas???

Originally Posted by onebadmofo

I have 07 e92 and fought the battle with my orange LED's. and I won
Thing is I modified 2-3 values at a time and don't know what exactly did the trick but I think it's these two.
First thing's first. To turn off orange LED's during welcome lights change

"WL_POL" to nicht_aktiv

To turn off LED's with headlights on change

PWM_FL_ALS_CORNERLIGHT to wert_02

I'm putting everything in the spreadsheet now.

[outie]

Originally Posted by Neutrino45

It's the same link. You just need to request access.

outie, is this your forum? I'll add it to my forum signature as well and will promote it on the spreadsheet. Maybe we can migrate our coding discussions there??

Yes sure that would be a great way to help others out. This thread has gotten quite long and disorganized. Thanks.

[onebadmofo]

Try different options? wert_01 thru wert_04.

Here's what I did. I searched for "SL" and "CORNER" and "POL" and looked what chages it did. One of them did the trick for me.

I did heard from one of the vendors back in a day when I had them do my coding that not every car is able to turn that LED off. Don't know if it's true or not.

Originally Posted by spera23

Hopefully you will be help me out with one more...

I was able to disable the orange LED's as the DRL's and worked fine. Now I am trying to disable the same orange LED's this time when they are on with the regular headlights at night.

The spread sheet lists:

FRM PWM_FL_ALS_CORNERLIGHT
NFRM PWM_POL_BEI_AKTIVEN_AL
NFRM PWM_POL_BEI_AKTIVEN_FL
NFRM SL_FKT_MIT_POL

I only have the first parameter in my modules and it is already set to "wert_02" which the spread sheet says to set it to.

Unfortunately the LED's are still on, and im not sure what else to try.

Any ideas???

[el-drifot]

Hey guys !

Heres a way to let the windows go automaticly up, when the door is open ( Normally you have to hold the button all the time up, till the window is closed when door is open :

Module: NFRM

TUERAUF_STOP_MAUT
nicht_aktiv <----change to

If you need translation help, I am german ;-)

Greetings from Germany

El-Drifto ( I wrote it wrong while registration )

[BeWide]

Thx El drifto !


I have added your parmeter , and two other :

Alarm beep on unlock QUIT_AKUST_ENTSCH

Alarm beep on unlock (two beeps) (must have alarm installed)


Alarm beep on lock QUIT_AKUST_SCHAERF

Alarm beep on lock (one beep) (must have alarm installed)


Please some guys equiped with oem alarm can test this function ?



Edit :

We use NCS Expert for coding our car, but anyone here know how to perfom diagnostic and log on our car ?

[spazticrecords]

Thanks @El-Drifto. Nice find I am going to test this later. (What year is your car? Do you know if you can use DVD in motion in Germany stock?)

I am confused about the orange led. I have an E90 LCI, are you guys talking about the 3 little orange led lights from these values (posted by @Outie)

"WL_POL_3R" -> nicht_aktiv

For the amber LED w/ headlight (YES! I finally figured it out!)

"PWM_POL_BEI_AKTIVEN_AL" -> wert_04
"PWM_POL_BEI_AKTIVEN_FL" -> wert_04

To turn off the amber LED on parking light:

"SL_FKT_MIT_POL" -> nicht_aktiv

Can someone take a picture of which lights these refer to.

[Pseudo Nim]

Originally Posted by BeWide

We use NCS Expert for coding our car, but anyone here know how to perfom diagnostic and log on our car ?

Log no, but you can diag (and clear codes, like a BT Tool) using INPA.

[BeWide]

Originally Posted by Pseudo Nim

Log no, but you can diag (and clear codes, like a BT Tool) using INPA.

Ok tks for the clearence, but do you know any software capable to log vehicle data like VCDS on VW car ?

Beacause when you chiptune a car, is really necessary to log the car to see if all value are correct.

[Pseudo Nim]

Originally Posted by BeWide

Ok tks for the clearence, but do you know any software capable to log vehicle data like VCDS on VW car ?

Beacause when you chiptune a car, is really necessary to log the car to see if all value are correct.

Question is, though, what are you using to tune - because most chip tunes offer their own logging. The Procede has one, JB3/4 has one I think, and the Cobb the has a (very good) built-in logger.

[BeWide]

Originally Posted by Pseudo Nim

Question is, though, what are you using to tune - because most chip tunes offer their own logging. The Procede has one, JB3/4 has one I think, and the Cobb the has a (very good) built-in logger.

We don't use an additional chip, we modifiy directly the car software

[dmurray14]

Originally Posted by luigi42

Anyone have any luck enabling SMS (PHONE_SMS) or the Notepad (NOTEPAD_CIC) feature inside CIC? In the case of the Notepad, the option appeared on menu, but when selected it doesn't appear to do anything. Thanks

Notepad doesn't do anything and the SMS feature won't be of much use unless you have one of the few older phones that support SMS over bluetooth.

[q_jonblaze]

these are the values which have airbag included in them(taken from my complete file)

AIRBAG_STARTUP_TIMEOUT
wert_01
AIRBAG_MSG_TIMEOUT
wert_01
KNIEAIRBAG_FAHRER_1
nicht_aktiv
KNIEAIRBAG_BEIFAHRER_1
nicht_aktiv
ADAPTIVER_BEIFAHRERAIRBAG
nicht_aktiv
AIRBAG_INTRFCE_ERROR_DUR
wert_01
AIRBAG_COMM_TEST_DELAY
wert_01
AIRBAG_POS
nicht_aktiv
ACK_2_AIRBAG
nicht_aktiv
AIRBAG_FAHRER_1
aktiv
AIRBAG_BEIFAHRER_1
aktiv
AIRBAG_TRIGGERED_E-CALL
aktiv

which of these are likely to disable the airbag faults when sports seats are fitted?

[txusa03]

Originally Posted by Neutrino45

It's the same link. You just need to request access.



outie, is this your forum? I'll add it to my forum signature as well and will promote it on the spreadsheet. Maybe we can migrate our coding discussions there??

What page is the spread sheet on? I looked at the first several pages on the beginning and could not find the spread sheet.

Another coding success here. Another nice member PM me to tell me how to get a manly sound alarm chirp as oppose to the girly chrip I was getting. Since I did not see it posted here and I cannot find the spreadsheet, I am not sure if it has been added to spreadsheet.

Work like a charm, in DWAS, find BUZZER_HIGH_LEVEL and replace:
wert_06
wert_07
wert_08

with
wert_04
wert_05

I suspect that if anyone who do not like the manly sound chirp can change their wert value to get a more girly sound chirp.

The chirp is quite lound now. I might try to see if I can lower it by using
wert_04
wert_05
wert_06

[Neutrino45]

Here you go!

https://spreadsheets.google.com/ccc?...CPqY7sEC#gid=0

Page 1, directly below the 2 pictures in the 1st post.

[onebadmofo]

Hooray! I got the SSS talk to the car finally. Only thing is that my SSS is too old. Updating it now

[BeWide]

Originally Posted by txusa03

What page is the spread sheet on? I looked at the first several pages on the beginning and could not find the spread sheet.

Another coding success here. Another nice member PM me to tell me how to get a manly sound alarm chirp as oppose to the girly chrip I was getting. Since I did not see it posted here and I cannot find the spreadsheet, I am not sure if it has been added to spreadsheet.

Work like a charm, in DWAS, find BUZZER_HIGH_LEVEL and replace:
wert_06
wert_07
wert_08

with
wert_04
wert_05

I suspect that if anyone who do not like the manly sound chirp can change their wert value to get a more girly sound chirp.

The chirp is quite lound now. I might try to see if I can lower it by using
wert_04
wert_05
wert_06

Just added your code in the spreadsheet for you .

Can you make a little video to show the sound difference ? Thx

[spazticrecords]

Does Progmann work with 2010? Im a little confused what you use progman for? I know it's for updating modules but does it do coding also?

Nice fix @TxUsa. I know there were a couple of members having this issue. I love how were still finding out new things. We need to make sure we keep the spreadsheet updated.

[Pseudo Nim]

Originally Posted by BeWide

Ok tks for the clearence, but do you know any software capable to log vehicle data like VCDS on VW car ?

Beacause when you chiptune a car, is really necessary to log the car to see if all value are correct.

Originally Posted by BeWide

We don't use an additional chip, we modifiy directly the car software

Dude, you just said "when you chip tune....", re-read your post before rolling eyes. For NCS expert coding, there is nothing _to_ log. What are you proposing, to log whether the side markers turned on or not? :P nothing of what you are changing affects vehicle performance in any way, hence there is nothing you can log.

[BeWide]

Originally Posted by Pseudo Nim

Dude, you just said "when you chip tune....", re-read your post before rolling eyes. For NCS expert coding, there is nothing _to_ log. What are you proposing, to log whether the side markers turned on or not? :P nothing of what you are changing affects vehicle performance in any way, hence there is nothing you can log.

Sorry, I'm french, so sometimes my vocabulary is wrong...

Then I try to explain more , when we change the engine mapping of a vehicle, we must log the data engine to check the variable (turbo pressure, injection,...) I wondering if anyone here knew a logging software for bmw (like VCDS for Volkswagen )

Am I more clear?