[robc1976]

I had a resonator delete...then decided i wanted to get a muffler delete and weld back in the resonator but it can't be done....car sounds great...of course got a bit of drone....one VERY odd thing is the drone got better like the ECU adapted to it or something??? That sounds strange lol!!

Question is this...what is a god resonators or 2 to put in where the mufflers where....has a bit of rasp.

Probably should have jus got the HPF exhaust but this delete does not sound bad. I would upload a clip but windows movie maker stopped working and I can't find a good program to upload HD (MTS ) files.

[bigdnno98]

I put in vibrant resonators an it really deepened the sound up a lot. Got them really cheap off amazon. Don't remember the part number but search mr5 custom exhaust. Part numbers are in that thread.

[robc1976]

Originally Posted by bigdnno98

I put in vibrant resonators an it really deepened the sound up a lot. Got them really cheap off amazon. Don't remember the part number but search mr5 custom exhaust. Part numbers are in that thread.

sweet!!

[robc1976]

Originally Posted by bigdnno98

I put in vibrant resonators an it really deepened the sound up a lot. Got them really cheap off amazon. Don't remember the part number but search mr5 custom exhaust. Part numbers are in that thread.

cant find the thread...will these work?

http://www.ebay.com/itm/New-1792-Vib...78b5dc&vxp=mtr

[bigdnno98]

Originally Posted by robc1976

cant find the thread...will these work?

http://www.ebay.com/itm/New-1792-Vib...78b5dc&vxp=mtr

Since you're going to put it in your muffler delete piping you'll need to know the OD of your new piping. Different shops install differently. The good one use the same size ID piping and swedge (stretch) the resonator to get a snug fit. Some other shops rather you get a .25" larger ID on the resonator and just slide it on and weld it. You def need to know what size piping your dealing with first though. Stock is 2.25" IIRC. your muffler delete may be 2.5"

[bigdnno98]

Check the exhaust clips sticky for mr5 custom exhaust. That's where I found it to build mine

[robc1976]

Originally Posted by bigdnno98

Since you're going to put it in your muffler delete piping you'll need to know the OD of your new piping. Different shops install differently. The good one use the same size ID piping and swedge (stretch) the resonator to get a snug fit. Some other shops rather you get a .25" larger ID on the resonator and just slide it on and weld it. You def need to know what size piping your dealing with first though. Stock is 2.25" IIRC. your muffler delete may be 2.5"

That is what I am trying to find out now...looks to be 2.5"....the pic below is my muffler after I emptied them out...lot of water LOL!!

[bigdnno98]

Actually looks same as stock which I think is 2.25". I would swing it by a reputable exhaust shop though to make sure. They'd be able to give you the part # of the resonators too.

[robc1976]

Originally Posted by bigdnno98

Actually looks same as stock which I think is 2.25". I would swing it by a reputable exhaust shop though to make sure. They'd be able to give you the part # of the resonators too.

Will do, is vibrant the best resonator? I know they mainly deal with rasp, re tyre any tht help with drone?

[bigdnno98]

resonators do not help with drone. That's what mufflers do.

[robc1976]

Originally Posted by bigdnno98

resonators do not help with drone. That's what mufflers do.

I figured so. Had took though.