n55 Procede v5 update....?

Pepe_pr · 03-01-2011, 06:32 PM

I need more boost and definatively more gas!!!! Cmon shiv. I'm waiting to shift to procede.

e92sport · 03-01-2011, 06:35 PM

Quote:

Originally Posted by Pepe_pr

I need more boost and definatively more gas!!!! Cmon shiv. I'm waiting to shift to procede.

I don't know what your waiting for... Procede is the best for the n55 at the moment even with out this new update.

shockin330i · 03-01-2011, 11:57 PM

Quote:

Originally Posted by e92sport

I don't know what your waiting for... Procede is the best for the n55 at the moment even with out this new update.

Not if your car goes into limp mode

Pepe_pr · 03-02-2011, 03:56 PM

Quote:

Originally Posted by shockin330i

Not if your car goes into limp mode

TRUE THAT

Keik E92 M3 · 03-02-2011, 05:09 PM

Yeah like me, i finally ran into the limp mode and it sux BAD! makes you want to go back stock..

very scary too. I thought i blew my engine!!!

e92sport · 03-02-2011, 07:07 PM

I did not touch anything on the procede settings... I left it as is and have had no issues at all. My car gets beat on pretty bad. I run map 2 perfect.

If you guys messed with the setting that can be the cause of the issue.

I'm running hp filter, AR dp with v5. Car runs great.

shockin330i · 03-02-2011, 07:11 PM

Quote:

Originally Posted by e92sport

I did not touch anything on the procede settings... I left it as is and have had no issues at all. My car gets beat on pretty bad. I run map 2 perfect.

If you guys messed with the setting that can be the cause of the issue.

I'm running hp filter, AR dp with v5. Car runs great.

Shiv already told us that the car is cutting fuel.

Keik E92 M3 · 03-02-2011, 11:02 PM

Quote:

Originally Posted by e92sport

I did not touch anything on the procede settings... I left it as is and have had no issues at all. My car gets beat on pretty bad. I run map 2 perfect.

If you guys messed with the setting that can be the cause of the issue.

I'm running hp filter, AR dp with v5. Car runs great.

Its not that some have changed settings.. I myself have not changed anything.. I haven't even connected the procede to my laptop (due to the connection keeps failing) So mine is running completely as is...

My car stock:drop in filter & procede. and Bammm limp mode...

e92sport · 03-02-2011, 11:19 PM

Quote:

Originally Posted by keikdasneak

Its not that some have changed settings.. I myself have not changed anything.. I haven't even connected the procede to my laptop (due to the connection keeps failing) So mine is running completely as is...

My car stock:drop in filter & procede. and Bammm limp mode...

I had the same failing issue and i called Robert and he explained that i needed to have my laptop running on high performance and connected to a powersource.. After i did that, no issues with connection.

Try resetting your auto tune settings for the map your using and see if it makes a difference.

I seriously have no complaints.

shockin330i · 03-02-2011, 11:43 PM

Quote:

Originally Posted by e92sport

I had the same failing issue and i called Robert and he explained that i needed to have my laptop running on high performance and connected to a powersource.. After i did that, no issues with connection.

Try resetting your auto tune settings for the map your using and see if it makes a difference.

I seriously have no complaints.

Went to the tracks and it died again. Hit a 13.1 though even in limp mode lol

Keik E92 M3 · 03-03-2011, 12:16 AM

Quote:

Originally Posted by e92sport

I had the same failing issue and i called Robert and he explained that i needed to have my laptop running on high performance and connected to a powersource.. After i did that, no issues with connection.

Try resetting your auto tune settings for the map your using and see if it makes a difference.

I seriously have no complaints.

tried that nothing yet.. I am running windows 7 64 bit.. I am going to dual boot windows xp sp3...

I think your the only N55 owner who hasn't had a limp mode with the procede...

the rest of us have.... Not complaining but it needs to be fixed at least so i can enjoy what i paid for..

shockin330i · 03-03-2011, 12:51 AM

Quote:

Originally Posted by keikdasneak

tried that nothing yet.. I am running windows 7 64 bit.. I am going to dual boot windows xp sp3...

I think your the only N55 owner who hasn't had a limp mode with the procede...

the rest of us have.... Not complaining but it needs to be fixed at least so i can enjoy what i paid for..

Werd

MJR63 · 03-03-2011, 05:56 AM

I've never had a limp mode with my N55 and I was one of the first to get it.

Slops · 03-03-2011, 07:32 AM

what the shit... does that mean we have to dail the boost down 1psi like shiv mentioned before to N54 owners? I think he also mentioned that the misfires was caused by bad or poorly designed oil catch cans. Do you guys have any OCC installed?

MJR63 · 03-03-2011, 08:36 AM

I'm completely stock except the Procede and no limp modes!

vwrefugee · 03-03-2011, 08:36 AM

Quote:

I think your the only N55 owner who hasn't had a limp mode with the procede... the rest of us have

Wow, when did this come to light, I must have missed something?! Has Shiv addressed this anywhere in a thread? I was really considering a Procede but I had limp mode problems on my last car and there's no way I'm going through that s#%t again. Hope this gets resolved quickly. On my former GTI it was as simple as the car not liking ethanol in the gas after the upgrades, but it took forever to figure it out.

grandmoff · 03-03-2011, 08:42 AM

I installed my Procede this past weekend. Not beating on her too hard during my commute but so far so good. Hope to get some better drive time this coming weekend so I can really open her up. Seems like autotuning has done it's thing and boost/power has crept up through the first few days. Keeping my fingers crossed... Going to order the serial<->usb cable today just in case though. Very happy with everything thus far!

grandmoff · 03-03-2011, 08:45 AM

Quote:

Originally Posted by vwrefugee

Wow, when did this come to light, I must have missed something?! Has Shiv addressed this anywhere in a thread? I was really considering a Procede but I had limp mode problems on my last car and there's no way I'm going through that s#%t again. Hope this gets resolved quickly. On my former GTI it was as simple as the car not liking ethanol in the gas after the upgrades, but it took forever to figure it out.

Yes, I believe this will be solved by a new patch cable that is due to to be shipping (as I understand it) in the next week or so. This should get around the fuel issues under higher boost that folks have been running into. The temp solution is to manually dial down 1psi if you experience the issue in the interim.

adrock · 03-03-2011, 10:33 AM

Quote:

Originally Posted by grandmoff

Yes, I believe this will be solved by a new patch cable that is due to to be shipping (as I understand it) in the next week or so. This should get around the fuel issues under higher boost that folks have been running into. The temp solution is to manually dial down 1psi if you experience the issue in the interim.

What does the new patch cable accomplish exactly? Is there any more info on it? I just received my unit, and was planning on installing this weekend. Now I am wondering if it came with the cable, and/or if I should wait.

shockin330i · 03-03-2011, 10:37 AM

Quote:

Originally Posted by MJR63

I'm completely stock except the Procede and no limp modes!

Lol exactly, we're running a few extras...

shockin330i · 03-03-2011, 10:39 AM

Quote:

Originally Posted by adrock

What does the new patch cable accomplish exactly? Is there any more info on it? I just received my unit, and was planning on installing this weekend. Now I am wondering if it came with the cable, and/or if I should wait.

It probably did not cme with the cable since they aren't in yet.

e92sport · 03-03-2011, 11:20 AM

Quote:

Originally Posted by shockin330i

Quote:

Originally Posted by MJR63

I'm completely stock except the Procede and no limp modes!

Lol exactly, we're running a few extras...

I just got my fmic. We'll see if I get a limp mode with this extra mod. Hopefully not.

03-01-2011, 06:32 PM	#23
Pepe_pr Lieutenant 35 Rep 553 Posts Drives: 135i black on black Join Date: Sep 2010 Location: San Juan PR iTrader: (1)	I need more boost and definatively more gas!!!! Cmon shiv. I'm waiting to shift to procede. __________________ USED TO HAVE A 385 whp 479 tq N55 335 2011 (AT) AND NOW A 135 M package 2010 (AT) 447whp/504tq
	Appreciate 0 Quote

03-02-2011, 05:09 PM	#27
Keik E92 M3 Banned 173 Rep 1,343 Posts Drives: BMW M3 DCT Join Date: Jan 2010 Location: SoCal iTrader: (6) Garage List 2009 BMW [9.00] 2011 BMW 335i [6.80]	Yeah like me, i finally ran into the limp mode and it sux BAD! makes you want to go back stock.. very scary too. I thought i blew my engine!!!
	Appreciate 0 Quote

03-02-2011, 07:07 PM	#28
e92sport Captain 38 Rep 600 Posts Drives: black e92 sport Join Date: Apr 2007 Location: FL iTrader: (2)	I did not touch anything on the procede settings... I left it as is and have had no issues at all. My car gets beat on pretty bad. I run map 2 perfect. If you guys messed with the setting that can be the cause of the issue. I'm running hp filter, AR dp with v5. Car runs great. __________________
	Appreciate 0 Quote

03-03-2011, 05:56 AM	#35
MJR63 Lieutenant 21 Rep 415 Posts Drives: 2011 335i X-Drive Sedan Join Date: Sep 2010 Location: Tolland, CT iTrader: (5) Garage List 2011 BMW 335i x-drvie [0.00]	I've never had a limp mode with my N55 and I was one of the first to get it. __________________ 2011 335 X-Drive E90 MTECH 6MT • AST4100's • Vishnu 3.5" DP • Helix FMIC • Procede V5 • M3 Strut Brace • M3 Trunk Lip • LUX H8 • 19" Alufelgen SF-71: 8.5' front, 9.5' rear • Continental ExtremeContact DW Tires
	Appreciate 0 Quote

03-03-2011, 07:32 AM	#36
Slops Major General 188 Rep 5,417 Posts Drives: 2005 C55 AMG Join Date: Jan 2011 Location: Oxford iTrader: (2)	what the shit... does that mean we have to dail the boost down 1psi like shiv mentioned before to N54 owners? I think he also mentioned that the misfires was caused by bad or poorly designed oil catch cans. Do you guys have any OCC installed? Last edited by Slops; 03-03-2011 at 07:50 AM..
	Appreciate 0 Quote

03-03-2011, 08:36 AM	#37
MJR63 Lieutenant 21 Rep 415 Posts Drives: 2011 335i X-Drive Sedan Join Date: Sep 2010 Location: Tolland, CT iTrader: (5) Garage List 2011 BMW 335i x-drvie [0.00]	I'm completely stock except the Procede and no limp modes!
	Appreciate 0 Quote

03-03-2011, 08:42 AM	#39
grandmoff Private First Class 3 Rep 144 Posts Drives: 2011 e92 335i M-Sport 6MT Join Date: Jan 2011 Location: Atlanta iTrader: (1)	I installed my Procede this past weekend. Not beating on her too hard during my commute but so far so good. Hope to get some better drive time this coming weekend so I can really open her up. Seems like autotuning has done it's thing and boost/power has crept up through the first few days. Keeping my fingers crossed... Going to order the serial<->usb cable today just in case though. Very happy with everything thus far!
	Appreciate 0 Quote