|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
HELP! E90 Runs Like Crap After Valve Cover Gasket Job
|
|
06-26-2010, 07:06 PM | #1 |
Enlisted Member
2
Rep 36
Posts |
HELP! E90 Runs Like Crap After Valve Cover Gasket Job
So,
I changed the valve cover gasket on my e90 that had been leaking oil for a while. (That was a PITA itself, since I had a broken bolt). I get it all changed, and all back together, start it up, and it runs like Sh*$t. It runs, but has a real rough idle, and when rev-ing it up, it is real rough. Idles barely around 600rpms. Any ideas on what is up? The plugs are new....PLEASE HELP! I dont want to have to take it to the stealer! Thanks everyone! Kev |
06-26-2010, 09:33 PM | #3 |
Enlisted Member
2
Rep 36
Posts |
Yeah, its plugged in...Is there some kind of calibration it needs? It acts like there is a major misfire. Did I mess up the fuel injectors when I removed them and repluged them in?
Thanks!! |
Appreciate
0
|
06-27-2010, 09:06 PM | #6 |
Enlisted Member
2
Rep 36
Posts |
Guess what,
Misfire, cylinder 6....Checked coil, wire was not connected all of the way! I got lucky this time! Thanks for the help guys, I love this site! Kevin |
Appreciate
0
|
06-27-2010, 10:05 PM | #7 |
Resident Black Guy
251
Rep 2,302
Posts |
|
Appreciate
0
|
06-28-2010, 09:17 PM | #8 |
Enlisted Member
2
Rep 36
Posts |
So now, I get a grinding noise, sounds like it is coming from the alternator? It didnt happen until I hosed down the engine with degreaser (because of the leaking gasket) and now I have a grinding sound....Its got 104,xxx miles on it...probably due for one anyway.
|
Appreciate
0
|
01-11-2011, 03:29 AM | #9 |
New Member
7
Rep 19
Posts |
Hey Kev325i, Any tips on replacing the valve cover gasket? I am about to tackle this project and am trying to see exactly how to do it. Thanks! My email is blah937@yahoo.com if anyone has any tips for me.
|
Appreciate
0
|
Bookmarks |
|
|