* The Official: San Diego Chat Thread (#4) *

Zubz · 06-20-2013, 07:44 PM

Quote:

Originally Posted by smares21

Because he's a flake.

Really? Well that stinks. I just sent an email about how my LED burned out after one year. So I shouldn't expect a new LED let alone a response?

byoung8 · 06-20-2013, 08:36 PM

Quote:

Originally Posted by zubin75

Really? Well that stinks. I just sent an email about how my LED burned out after one year. So I shouldn't expect a new LED let alone a response?

Every time I try to buy something from modmy3 it never goes through. I want to support local but seems near impossible. But if you don't get a response then it's just like buying from ebay.

Ron1n · 06-20-2013, 09:19 PM

Both my D1S burned out, and Mike did nothing about it. I was really disappointed, for as long as I've known the guy. Cost me $120 to get another set, when I should have just gotten a warranty replacement. And mine went out inside 4 months.

And for you SD folks, I'm in Mira Mesa. Need a spare set of D1S' now, too, if anyone has em (6000K or 4300K).

smares21 · 06-20-2013, 11:06 PM

Ryan, I've got a whole garage full of D1S bulbs. (and all other HID/LED bulbs)

smares21 · 06-20-2013, 11:10 PM

Quote:

Originally Posted by zubin75

Really? Well that stinks. I just sent an email about how my LED burned out after one year. So I shouldn't expect a new LED let alone a response?

http://www.e90post.com/forums/showth...ghlight=modmy3 - Vendor warning

http://www.e90post.com/forums/showth...ghlight=modmy3 - vendor warning #2

http://www.e90post.com/forums/showth...ghlight=modmy3 - Poor cust service

3 threads, about 9 pages, less than 6 months.

As George Bush so eloquently put it:
"There's an old saying in Tennessee - I know it's in Texas, probably in Tennessee - that says, fool me once, shame on - shame on you. Fool me - you can't get fooled again."

byoung8 · 06-21-2013, 12:04 AM

Damn that's rough. Seems like modmy3 businesd is really a side part time gig like bartending or waitressing. On a related tangent, I went to tilted kilt for the first time

Kasé Zomé · 06-21-2013, 03:05 PM

Quote:

Originally Posted by byoung8

On a related tangent, I went to tilted kilt for the first time

The one in Temecula is worthy of

. The Mission Valley one... meh...

christianjan · 06-21-2013, 03:08 PM

Yeah I've had a horrible experience with ModMy3, I bought a bumper from them and got it painted straight from the box and it turns out that the bumper was for an e92. They tried to blame it on my shop for not taking it out the box out to verify which model it was and then I had to sell it myself to get more money from it and paint. When I got another bumper from them, it had a window washers, which I don't have. All I hear are excuses from them, trying to divert the blame. Just like Byoung8, I want to support the local BMW businesses, but all they do is disappoint.

BLK_08E90 · 06-21-2013, 04:16 PM

Local sale..temecula/San Diego area

OEM E90 mtech bumper with poly 3d Studie lip painted jet black

http://www.e90post.com/forums/showth...8#post14203578

Suspension parts..koni yellows, M3, etc.

http://www.e90post.com/forums/showth...6#post14203526

2008 E90 335i FBO 48k miles
http://www.e90post.com/forums/showthread.php?t=815721

byoung8 · 06-21-2013, 08:53 PM

Quote:

Originally Posted by Kasé Zomé

The one in Temecula is worthy of

. The Mission Valley one... meh...

Went to the one next to petco park. Havent tried the mission valley one

Zubz · 06-22-2013, 08:37 AM

Quote:

Originally Posted by smares21

http://www.e90post.com/forums/showth...ghlight=modmy3 - Vendor warning

http://www.e90post.com/forums/showth...ghlight=modmy3 - vendor warning #2

http://www.e90post.com/forums/showth...ghlight=modmy3 - Poor cust service

3 threads, about 9 pages, less than 6 months.

As George Bush so eloquently put it:
"There's an old saying in Tennessee - I know it's in Texas, probably in Tennessee - that says, fool me once, shame on - shame on you. Fool me - you can't get fooled again."

I didn't troll around looking for bad info on the guy. He never fooled me before. But not again. I was all drawn in by his assistant that was really responsive and answered all my questions. Oh well. Any good places to get the daytime running lamps then?

I don't look forward to installing those stupid things again.

smares21 · 06-22-2013, 10:26 AM

Quote:

Originally Posted by zubin75

I didn't troll around looking for bad info on the guy. He never fooled me before. But not again. I was all drawn in by his assistant that was really responsive and answered all my questions. Oh well. Any good places to get the daytime running lamps then?

I don't look forward to installing those stupid things again.

If you have an LCI car, I've got about 5 sets of the 8w LED ones left. Just PM me. I'm in Mira Mesa area.

Ron1n · 06-22-2013, 12:04 PM

Quote:

Originally Posted by smares21

Ryan, I've got a whole garage full of D1S bulbs. (and all other HID/LED bulbs)

Scott, went to DDM and picked up a pair for $30. I'll remember that next time, though...lol.

As a side note, I am trying to figure out the best way to level my headlights. I feel they're not sitting right (I know how to adjust them, just not sure how to make sure they're level). Additionally, I swear one is slightly turned in, and I don't see an adjustment for that.

Quote:

Originally Posted by zubin75

I didn't troll around looking for bad info on the guy. He never fooled me before. But not again. I was all drawn in by his assistant that was really responsive and answered all my questions. Oh well. Any good places to get the daytime running lamps then?

I don't look forward to installing those stupid things again.

Yeah, the area to work in for those is tough. I've had to do it a few times. Swapping out the stock bulbs is easy...LED ones, not so much.

khaye1 · 06-23-2013, 01:20 AM

Sup peeps...been awhile! Looks like RB group is growing...I'm @ Westwood.

Sales@modmy3.com · 06-25-2013, 06:55 PM

Quote:

Originally Posted by byoung8

Why do I always have communication challenges with modmy3?

B sorry,

I guess we just didn't get each other's text

Quote:

Originally Posted by smares21

Because he's a flake.

I don't think I have ever met you, if I have I apologize that I have flaked on you? May I know what exactly happened?

Quote:

Originally Posted by zubin75

Really? Well that stinks. I just sent an email about how my LED burned out after one year. So I shouldn't expect a new LED let alone a response?

Hey Zubin, I don't think I have seen the e-mail on this, today I sent you a message to take care of it

Let me know bud

Quote:

Originally Posted by byoung8

Every time I try to buy something from modmy3 it never goes through. I want to support local but seems near impossible. But if you don't get a response then it's just like buying from ebay.

Quote:

Originally Posted by Ron1n

Both my D1S burned out, and Mike did nothing about it. I was really disappointed, for as long as I've known the guy. Cost me $120 to get another set, when I should have just gotten a warranty replacement. And mine went out inside 4 months.

And for you SD folks, I'm in Mira Mesa. Need a spare set of D1S' now, too, if anyone has em (6000K or 4300K).

Ryan, check Pm

this one goes longer sadly it's associated with our common bad "thing"

Quote:

Originally Posted by smares21

Ryan, I've got a whole garage full of D1S bulbs. (and all other HID/LED bulbs)

Quote:

Originally Posted by smares21

http://www.e90post.com/forums/showth...ghlight=modmy3 - Vendor warning

http://www.e90post.com/forums/showth...ghlight=modmy3 - vendor warning #2

http://www.e90post.com/forums/showth...ghlight=modmy3 - Poor cust service

3 threads, about 9 pages, less than 6 months.

As George Bush so eloquently put it:
"There's an old saying in Tennessee - I know it's in Texas, probably in Tennessee - that says, fool me once, shame on - shame on you. Fool me - you can't get fooled again."

Again, I'm sorry, I am now taking the forums back myself, yes I am working the forums myself. No more assistant, no more phones not getting picked up etc. let me know what my team did wrong and I will correct it!

Quote:

Originally Posted by byoung8

Damn that's rough. Seems like modmy3 businesd is really a side part time gig like bartending or waitressing. On a related tangent, I went to tilted kilt for the first time

Quote:

Originally Posted by Kasé Zomé

The one in Temecula is worthy of

. The Mission Valley one... meh...

Quote:

Originally Posted by Ron1n

Scott, went to DDM and picked up a pair for $30. I'll remember that next time, though...lol.

As a side note, I am trying to figure out the best way to level my headlights. I feel they're not sitting right (I know how to adjust them, just not sure how to make sure they're level). Additionally, I swear one is slightly turned in, and I don't see an adjustment for that.

Yeah, the area to work in for those is tough. I've had to do it a few times. Swapping out the stock bulbs is easy...LED ones, not so much.

Have you checked your rear sensor on the rear left tires?

RollinOnDeez · 06-30-2013, 12:23 PM

Waddup SD, good news and bad news here....

Good news is that I have a baby boy coming! Bad news is I have to sell my e92 for something bigger.

I have a jb4 stage 3 G4 with USB installed with DCI, if anyone is a pro at un-installing I'd hook them up with some cash, I'm in PB right now but will drive close to get it done.

I will also sell the jb4 with USB cord and DCI, $350obo so if anyone knows anyone in the market for one of these please let me know. I am going to miss it, the car is a freakin beast with it and I have had no issues whatsoever with codes.

Let me know and thanks for all the support on this board!

D

christianjan · 07-01-2013, 07:38 PM

Quote:

Originally Posted by khaye1

Sup peeps...been awhile! Looks like RB group is growing...I'm @ Westwood.

Sup man, haven't seen you in a while, but the car is still lookin good. My new neighbor made a dent on my car :/

byoung8 · 07-01-2013, 08:37 PM

MTEC on the left eBay on the right. Huge difference

khaye1 · 07-01-2013, 11:20 PM

Quote:

Originally Posted by christianjan

Sup man, haven't seen you in a while, but the car is still lookin good. My new neighbor made a dent on my car :/

Ouch! Is he/she gonna pay for dent removal? Always wondered why you never back into your spot...get as close to the wall and you should have a ton of room on the other side, easier to get out too

jbnery6465 · 07-02-2013, 04:14 PM

I'm in need of detailing the ride and am tinkling with several options. Can you guys recommend a reputable detailer in SD? Preferably one that's in North County area and not one of those mobile 5-6 hour job detailers either...

Option 1: I could do the paint correction and LSP myself but it's difficult finding the time to do it

Option 2: The detail shop could do just the paint correction, clean interior and engine bay. I would do the LSP with either a sealant/wax combo or a nano-coat, and condition the interior myself. (Which I don't mind as I'd have to buy new products anyway for maintenance and I enjoy waxing the ride

)

Option 3: The detail shop could do it all for me, but $$$ is tight.

TIA...

Jeef · 07-02-2013, 07:59 PM

Quote:

Originally Posted by khaye1

Sup peeps...been awhile! Looks like RB group is growing...I'm @ Westwood.

Hey khaye haven't seen you in a while you still living same place? Where the RB group at? Maybe i will come by some time.

khaye1 · 07-02-2013, 11:07 PM

Quote:

Originally Posted by Jeef

Hey khaye haven't seen you in a while you still living same place? Where the RB group at? Maybe i will come by some time.

Still here bro...will be here until I can sell the damn place

06-20-2013, 09:19 PM	#1081
Ron1n Speed Demon 205 Rep 3,690 Posts Drives: 2021 M5C Join Date: Oct 2009 Location: Irvine iTrader: (6) Garage List 2021 M5 Competition [0.00] 2016 BMW 550i [0.00] 2011 335is [0.00] 2009 E93 M3 [10.00] 2010 335d [9.50]	Both my D1S burned out, and Mike did nothing about it. I was really disappointed, for as long as I've known the guy. Cost me $120 to get another set, when I should have just gotten a warranty replacement. And mine went out inside 4 months. And for you SD folks, I'm in Mira Mesa. Need a spare set of D1S' now, too, if anyone has em (6000K or 4300K). __________________ Current: '21 M5C, '15 X6 50i Previous: '18 M550i, '16 550i, '11 335is, '09 E93 M3 DCT, '10 E90 335d, '07 E90 328i
	Appreciate 0 Quote

06-20-2013, 11:06 PM	#1082
smares21 Banned 21 Rep 226 Posts Drives: Hooptie Join Date: Dec 2011 Location: Southern California iTrader: (3)	Ryan, I've got a whole garage full of D1S bulbs. (and all other HID/LED bulbs)
	Appreciate 0 Quote

06-21-2013, 12:04 AM	#1084
byoung8 Legendary 14 Rep 227 Posts Drives: 2007 335i E90 TiAg Join Date: Sep 2010 Location: San Deigo iTrader: (1)	Damn that's rough. Seems like modmy3 businesd is really a side part time gig like bartending or waitressing. On a related tangent, I went to tilted kilt for the first time __________________ '07 335i E90 Titanium Silver
	Appreciate 0 Quote

06-21-2013, 03:08 PM	#1086
christianjan Benz to a Beamer 1 Rep 155 Posts Drives: 07 e90 Join Date: Oct 2010 Location: San Diego, CA iTrader: (1)	Yeah I've had a horrible experience with ModMy3, I bought a bumper from them and got it painted straight from the box and it turns out that the bumper was for an e92. They tried to blame it on my shop for not taking it out the box out to verify which model it was and then I had to sell it myself to get more money from it and paint. When I got another bumper from them, it had a window washers, which I don't have. All I hear are excuses from them, trying to divert the blame. Just like Byoung8, I want to support the local BMW businesses, but all they do is disappoint.
	Appreciate 0 Quote

06-21-2013, 04:16 PM	#1087
BLK_08E90 Captain 63 Rep 617 Posts Drives: F10 M5, E70 X5d Join Date: Aug 2008 Location: SoCAL-San Diego iTrader: (8)	Local sale..temecula/San Diego area OEM E90 mtech bumper with poly 3d Studie lip painted jet black http://www.e90post.com/forums/showth...8#post14203578 Suspension parts..koni yellows, M3, etc. http://www.e90post.com/forums/showth...6#post14203526 2008 E90 335i FBO 48k miles http://www.e90post.com/forums/showthread.php?t=815721
	Appreciate 0 Quote

06-23-2013, 01:20 AM	#1092
khaye1 Colonel 145 Rep 2,809 Posts Drives: 18 AW F80 Join Date: Feb 2009 Location: San Diego iTrader: (8)	Sup peeps...been awhile! Looks like RB group is growing...I'm @ Westwood. __________________
	Appreciate 0 Quote

06-30-2013, 12:23 PM	#1094
RollinOnDeez Private 8 Rep 71 Posts Drives: Graphite on Coral Join Date: Jan 2011 Location: SD iTrader: (1)	Waddup SD, good news and bad news here.... Good news is that I have a baby boy coming! Bad news is I have to sell my e92 for something bigger. I have a jb4 stage 3 G4 with USB installed with DCI, if anyone is a pro at un-installing I'd hook them up with some cash, I'm in PB right now but will drive close to get it done. I will also sell the jb4 with USB cord and DCI, $350obo so if anyone knows anyone in the market for one of these please let me know. I am going to miss it, the car is a freakin beast with it and I have had no issues whatsoever with codes. Let me know and thanks for all the support on this board! D
	Appreciate 0 Quote

07-01-2013, 08:37 PM	#1096
byoung8 Legendary 14 Rep 227 Posts Drives: 2007 335i E90 TiAg Join Date: Sep 2010 Location: San Deigo iTrader: (1)	MTEC on the left eBay on the right. Huge difference __________________ '07 335i E90 Titanium Silver
	Appreciate 0 Quote

07-02-2013, 04:14 PM	#1098
jbnery6465 Private First Class 9 Rep 137 Posts Drives: 2006 BMW 325i Join Date: May 2013 Location: San Diego, CA iTrader: (0)	Recommended Detailer I'm in need of detailing the ride and am tinkling with several options. Can you guys recommend a reputable detailer in SD? Preferably one that's in North County area and not one of those mobile 5-6 hour job detailers either... Option 1: I could do the paint correction and LSP myself but it's difficult finding the time to do it Option 2: The detail shop could do just the paint correction, clean interior and engine bay. I would do the LSP with either a sealant/wax combo or a nano-coat, and condition the interior myself. (Which I don't mind as I'd have to buy new products anyway for maintenance and I enjoy waxing the ride ) Option 3: The detail shop could do it all for me, but $$$ is tight. TIA... __________________ - Jeremy - 2006 325I \| Arktis Metallic \| Premium + Sport \| 6MT \| 20% Tint \| K&N + Charcoal Delete
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search