[Bob@BPC]

Hello, My name is Bob. I'm the tuner for Bimmer Performance Center in Raleigh, NC. I would like to introduce our shop and share some information about us to the Bimmer Post community. Before I continue, please know we have contacted the forum administrators several times to become a site sponsor and have yet to hear back. The shop was started in 2011 by our owner, Dan Connor. For 14 years, Dan worked on BMW's as a dealership technician before deciding to go at it alone.

The business has grown to become the largest independent repair shop in central NC that focuses on only BMW vehicles. Other than repairing cars, BPC also has a motorsports division dedicated solely to fabrication, engine building, and tuning. BPC Motorsports has fabricated cars from the ground up and also built and tuned engines that have gone on to win a number of races & even championships in BMWCCA, NASA, Ultimate track car challenge (two years in a row). Our lead fabricator has learned from some of the best in the racing industry and our technicians have all gone through BMW's STEP program and have a combined experience of 47 years in BMW maintenance and repair.

We work with the best aftermarket companies like Active Autowerkes, VAC, Bimmerworld and Turner Motorsports. We are not here to sell or distribute parts and tunes, we just wanted to let the BMW world know who we are and turn your craziest BMW ideas into reality. From a bored and stroked 2.8L M20, a custom single turbo M54, N52 with a N54 intake manifold swap and Alpha N tune, an S62 swapped E30 that's completely back halved with E36 M3 sub-frame, suspension, and in the near future we have plans to build a stroked S63 out of a 2015 F10 M5. If you have any questions, feel free to contact me directly: EMAIL webmaster@bimmerperformancecenter.com or give us a call @ 919-501-2090 and ask for Randall, our motorsports service writer. We look forward to joining the Bimmer Post community and continuing to help build the baddest BMW's on the planet.

PS, a few projects going on

Custom headers for our S62 swapped E30





M50 with M54 manifolds cut and reworked to fit N54 turbos




N52/N54 intake manifold swap

E46 Turbo

Custom S54 3.4L stroker swapped E36 UTTC winner 2014

Custom swapped S62 swapped E46 UTTC winner 2015


E90 335d hybrid turbos



2015 F10 BPC Motorsports custom tune, Water/Methanol injection, and cold air intake.

[Lexx.md]

Cool to hear about such great companies, not sure if should be in diesel tread

[Bob@BPC]

Originally Posted by Lexx.md

Cool to hear about such great companies, not sure if should be in diesel tread

We do diesel, as noted above, The Hybrid M57 making over 420rwhp / 641rwtq And I would like to say thanks to all who have bought our tunes on this forum, and a BIG thanks to NC335D


http://bimmerperformancecenter.com/bpc-diesel/

[Lexx.md]

Ok, cool, now it makes sens

Hopefully people in you area will find your help when needed.

[BB_cuda]

Bob, is that NC335D's dyno data? 420 hp and 641 lb-ft sounds over the top. I heard about the race with a certain person from Albany :-)

[Bob@BPC]

Originally Posted by BB_cuda

Bob, is that NC335D's dyno data? 420 hp and 641 lb-ft sounds over the top. I heard about the race with a certain person from Albany :-)

It is, this is after we fixed the boost leaks and replaced the intercooler with the custom one. That race, oh boy, as soon as that thing hooked, it loaded the engine so hard it blew up the that forge unit in half. I think there needs to be a rematch.

[shnaggs]

Just want to chime in and say I am a happy BPC customer! Great and friendly crew to deal with, and the stage 2 tune is awsome

[geost]

Originally Posted by Bob@BPC

We do diesel, as noted above, The Hybrid M57 making over 420rwhp / 641rwtq And I would like to say thanks to all who have bought our tunes on this forum, and a BIG thanks to NC335D


http://bimmerperformancecenter.com/bpc-diesel/

Wow that video of the 335d is awesome! I wish mine could be modified to run like that!

[petey_highboost]

Once Jess is able to get my unit in his garage he's shipping the ecu right to you Bob!

[Bob@BPC]

Originally Posted by petey_highboost

Once Jess is able to get my unit in his garage he's shipping the ecu right to you Bob!

[iaknown]

Nice to meet you Bob

I like the pics and videos.....and that M5!!

[BB_cuda]

Originally Posted by Bob@BPC

It is, this is after we fixed the boost leaks and replaced the intercooler with the custom one. That race, oh boy, as soon as that thing hooked, it loaded the engine so hard it blew up the that forge unit in half. I think there needs to be a rematch.

Clarification: Over the top was meant to describe the dyno results are awesome. Wasn't implying that it wasn't believable. NC, got any 1/4 mile pass info (god's dyno) with the repaired setup?

[Bob@BPC]

Originally Posted by BB_cuda

Clarification: Over the top was meant to describe the dyno results are awesome. Wasn't implying that it wasn't believable. NC, got any 1/4 mile pass info (god's dyno) with the repaired setup?

Nothing yet, I do know its going to need some slicks to make a clean pass with 640tq

[rulonger]

Originally Posted by shnaggs

Just want to chime in and say I am a happy BPC customer! Great and friendly crew to deal with, and the stage 2 tune is awsome

+1

[BEWWWM]

Waiting on someone to release a full exhaust so I can let BPC sprinkle some magic in my car!

[HeatherM35d]

I recently got my X5d back from getting the alphabet delete done. The tuning by BPC is great, and the fabrication/install work done by Jess at Bohl Diesel is second to none. Bob and Jess said that I can get more power whenever I want. I think I'm going to wait until the new year for more power when Jess is doing tuning thru Bob at Bohl Diesel In Albany NY. Currently it drives great with the added power and makes no smoke at all. Lots of turbo whistle! More than enough power for groceries and Christmas shopping.

[WreckerX5d]

Originally Posted by HeatherM35d

I think I'm going to wait until the new year for more power when Jess is doing tuning thru Bob at Bohl Diesel In Albany NY.

Waiting for this as well.

[shnaggs]

Originally Posted by Wrecker335d

Waiting for this as well.

Wait what??? Did I miss the memo? What's the skinny?

[iaknown]

Originally Posted by HeatherM35d

I recently got my X5d back from getting the alphabet delete done. The tuning by BPC is great, and the fabrication/install work done by Jess at Bohl Diesel is second to none. Bob and Jess said that I can get more power whenever I want. I think I'm going to wait until the new year for more power when Jess is doing tuning thru Bob at Bohl Diesel In Albany NY. Currently it drives great with the added power and makes no smoke at all. Lots of turbo whistle! More than enough power for groceries and Christmas shopping.

Sounds like you must have been one of the 1st X5d customers Bohl diesel has laid his hands on! Did you get a good deal?

Those X5's are so nice, plenty of room in the back for birdhouses and the like.....

[WreckerX5d]

Originally Posted by shnaggs

Wait what??? Did I miss the memo? What's the skinny?

He's working a deal with BPC to be an installer. Not sure when it's available yet though; he mentioned it may be the 1st or 2nd week of Jan.