[yehteh]

I am about to get FBO's installed. I was wondering if I would need an aftermarket clutch, if so what clutch would be recommended? Also, where would be a good place in the Seattle area to get this done? Im installing IC, CAI, charge pipe with BOV's, DP's, and full exhaust. I have a COBB tuner, which Im taking the car down to Cobb and getting it tuned. Im going to install new plugs and new coils. I would also like to walnut blast the intakes. I did this about 20k miles ago. Does anyone know of a good place to get this done? Thanks

[danielfastv6]

I can do all that you mentioned in a day or so, I can get some help to speed up the process. Please Pam me if intrested

[yehteh]

Originally Posted by danielfastv6

I can do all that you mentioned in a day or so, I can get some help to speed up the process. Please Pam me if intrested

PM'd

[danielfastv6]

Replied

[prelude2perfect]

335is clutch is all you need. I have that with RB turbos, beating the hell out of it at the track and holding fine

[Miller335]

Stock clutch should hold factory turbos FBO on pump gas.
When you go to E85 all bets are off.