[j2m]

SOLD
$290 + Shipping
Was installed on my 2011 E92 335XI N55 for about 3 months. Worked great. Runs off of windshield wiper tank. Easy to Install comes with 1 meth Bung. ER Chargepipe Also available.


FROM BMS WEBSITE:
Methanol/Alcohol/Water injection, commonly referred to as "meth", allows you to make tremendous amounts of power on pump gas. The effect is similar to running 104 octane all the time, with additional cooling benefits allowing for more power than you could ever make on race gas alone.

We offer two unique styles of methanol kits. Our traditional "trunk mount" kits utilize the industry leading CM integrated tanks which locate the methanol pump in the tank simplifying install and removal. For those looking for a simpler and quicker install our engine bay mount (WW kit) utilizes your windshield wiper reservoir as a methanol tank. Since most windshield wiper fluids are up to 40% methanol the tank easily accommodates 50% ratio and higher methanol mixtures which both clean your windows and maximize engine output. And when fluid runs low you're low washer fluid light will remind you it's time to fill up. Our WW kit can be installed and removed in less than 20 minutes making it ideal for newer or leased vehicles.

Regardless of which install method you choose we've selected the 220psi methanol pump for its superior atomization and flow characteristics relative to less expensive 160psi pumps. This kit also features a high speed solenoid for precise control and a CM10 super atomizing injection nozzle perfectly sized for the 380-440whp range.

All kits integrate with the JB4 tuning system using the included FSB controller which allows for precise methanol solenoid mapping based on boost, throttle position, RPM, air intake temperature, advance, and other data elements available to the JB4 through its CANbus system. In addition the FSB feeds back an independent signal with pump loading and flow information allowing for safe and smooth progressive boost mapping. If the tank runs empty or flow drops for any reason the JB4 will safely back down performance to avoid knock. In addition methanol can be activated or disabled from the drivers seat and displayed in dash using your steering wheel control menu.

If you're using one of our older kits and want to upgrade to JB4/FSB integration you can purchase the FSB controller ala-cart. We also strongly suggest a solenoid with the FSB which is also available ala-cart.

The kits include everything needed for install except for a methanol bung. Depending on the model year of the vehicle you can add on one of our meth mount elbows, a new charge pipe with a methanol bung preinstalled, or if you're on a budget you can simply drill and tap your OEM chargepipe for the 1/8" NPT injection nozzle.

[j2m]

Bump

[JayML]

who did your install?

where do you get meth or make the mixture?

[j2m]

Originally Posted by slapmyfro

who did your install?

where do you get meth or make the mixture?

I did the install, it was VERY easy and I am far from a mechanic. BMS has step by step instructions. It took me about 45 mins for the Meth kit and about 30 mins for the ChargePipe

[j2m]

Price drop $290!

[ttt1595]

Hi, I have $250 if you don't get it sold!!

[j2m]

Originally Posted by ttt1595

Hi, I have $250 if you don't get it sold!!

SOLLLLLLLLLLLLD for $250