Still need my alloys repaired.

- Paul - · 03-31-2008, 06:19 AM

Ok - I'm running out of options now. I've tried a few places and have had no response so far. Anyone have any ideas of who I could contact to have my 19" BBS repaired. Two of them have very bad curb rash

I'd really like these sorted out before the next meet.
I'm in York so have no problem travelling to Leeds/Hull areas etc.

mjh93sa · 03-31-2008, 07:21 AM

The damage:

and what it should look like:

- Paul - · 03-31-2008, 07:29 AM

Cheers mate!

sheps · 03-31-2008, 07:35 AM

Get yourself a courier sorted and get them here

I have seen many examples of their work (not all mine, I'm not a serial wheel curber!!) and have always been impressed.

My 3 piece Ferrari wheel was sent there when I had an argument with a curb (and lost) having spun on oil - see below.

It came back as good as new. Fortunately I've not curbed a wheel since then but if I do, that's where they'll go to be done (that's where the 225M's will be going if I can't get the brake dust that's pitted-in, out)

Cafe.Racer · 03-31-2008, 08:01 AM

You might try http://www.selbys.co.uk/ in Nottingham, what I've seen them do to 911 Rear wheels (commonly smack hard against kerbs) is more than impressive.

steve-p · 03-31-2008, 08:50 AM

Try phoning your local BMW dealer and ask who they use for refurbs on cars they take into stock. That's what I did with MB and they were happy to help.

- Paul - · 03-31-2008, 12:48 PM

Thanks for the ideas and PM's - have contacted a few so will see what they come back with.

mjh93sa · 03-31-2008, 01:04 PM

Quote:

Originally Posted by 1stnewcar

Cheers mate!

Sorry Paul.

But I thought it better that people were aware of the level of work necessary before they suggest someone with a bit of emery paper and a spraycan!

SoYank · 03-31-2008, 02:11 PM

Paul, there's a place in Northallerton.

Fenwick Alloy Wheel Refurbishing Centre
Unit 4A Gaskell Close
Standard Way Industrial Estate
Northallerton, North Yorkshire DL6 2XE
08000 288911
www.alloywheelrefurbishing.co.uk

I've seen their work and their facility and they seem rather good. Their brochure states that all work is guaranteed and fully insured. You're pretty close so it might be worth your while to take it up there. At worst you're out the time and gas, oops, diesel, for the trip. They quoted £50+VAT a wheel for what I need done to a set (and that was extensive).

RockIt · 03-31-2008, 02:41 PM

Quote:

Originally Posted by SoYank

Paul, there's a place in Northallerton.

Fenwick Alloy Wheel Refurbishing Centre
Unit 4A Gaskell Close
Standard Way Industrial Estate
Northallerton, North Yorkshire DL6 2XE
08000 288911
www.alloywheelrefurbishing.co.uk

I've seen their work and their facility and they seem rather good. Their brochure states that all work is guaranteed and fully insured. You're pretty close so it might be worth your while to take it up there. At worst you're out the time and gas, oops, diesel, for the trip. They quoted £50+VAT a wheel for what I need done to a set (and that was extensive).

I was just about to recommend this company. When I used them to repair two badly damaged alloys, the repair guy came to my place of work and carried out an excellent repair at reasonable cost. They cover much of Yorkshire, including York.

http://www.fenwicksupplies.com/index.htm

Link takes you to their site with info about mobile repairs.

AnthonyC · 03-31-2008, 03:19 PM

They can be repaired by getting a good re-ferber to TIG weld new ally onto the rim, and then re-profiling the rim again on a lathe. Topped off with a polish or powder coat.

Lepsons spring to mind

www.lepsons.com

Regards

Anthony

scooba0010 · 03-31-2008, 03:28 PM

My local wheel dealer uses lepsons and had no issues with them he advised me to use them .I have seen lots of wheels they have refurbished and i wouldnt use any body else they even will arrange collection and return

Nohedes · 03-31-2008, 03:48 PM

I managed to kerb my offside rear 225M alloy a few weeks ago, and considered buying a new wheel (£500!!) before finding 'Pristine Wheels'. Firms recommended by others here may be a better bet due to geography, but I can heartily recommend Pristine for the quality of work - excellent colour match, and decent value at £106 all in.

They are in Woburn Sands, Bedfordshire.

PS: I have no connection with Pristine (or any other wheel refurbisher for that matter!).

- Paul - · 04-01-2008, 12:48 PM

Well I've tried fenwick.... again and still no reply - maybe they don't read their emails? Looks like I'll have to resort to actually using the phone.

I tend to only email.

RockIt · 04-01-2008, 01:22 PM

Quote:

Originally Posted by 1stnewcar

Well I've tried fenwick.... again and still no reply - maybe they don't read their emails? Looks like I'll have to resort to actually using the phone.

I tend to only email.

I'm the same , but I found that phoning was easier with Fenwicks.

beemerbird · 04-03-2008, 01:57 PM

Paul have you got your alloys sorted yet? As guess what - yesterday I scuffed my nearside front alloy

Some prat up too close and I had to park quickly - obviously I got too close to the friggin kerb. Thankfully, it is only a scuff.

Anyhow, got in touch with the bloke who did my bonnet stone chips and he also does alloy wheel repairs. If he's any good, I could give you his number and check whether he'll travel to York?

- Paul - · 04-03-2008, 02:45 PM

Quote:

Originally Posted by beemerbird

Paul have you got your alloys sorted yet? As guess what - yesterday I scuffed my nearside front alloy

Some prat up too close and I had to park quickly - obviously I got too close to the friggin kerb. Thankfully, it is only a scuff.

Anyhow, got in touch with the bloke who did my bonnet stone chips and he also does alloy wheel repairs. If he's any good, I could give you his number and check whether he'll travel to York?

Cheers Helen - worth a try..

booforty · 04-03-2008, 05:24 PM

First the MOT and now the alloys.... I'm expecting to see a 320d looking brand spanking new Paul!

beemerbird · 04-06-2008, 02:27 PM

Paul - bloke is coming on my day off (Wednesday) to repair my alloy, so if you're still not sorted by then, I'll let you know if he's any good etc.

SoYank · 04-06-2008, 04:34 PM

I thought I was going to have the record for quickest curb rash on Friday. I put my summer tires on last Sunday and crunched a curb on Friday on Foss Island Road in York with 34 miles on the rims. Muttering loudly to myself, I got out and fortunately found nothing. I have no idea what caused the sound. There doesn't appear to be any scrapes on either the rims or the bumper.

Good luck with your repairs Helen and Paul.

- Paul - · 04-08-2008, 11:25 AM

Booked in with Fenwicks so they can quote this Sat.

I'm guessing between £50 and £100 a wheel?

scottc · 04-08-2008, 12:44 PM

I have used wicked wheels for all of my wife's damage that she has done to my alloys

03-31-2008, 06:19 AM	#1
- Paul - Major General 695 Rep 7,308 Posts Drives: see above. Join Date: Apr 2005 Location: Yorkshire, UK iTrader: (5) Garage List 2005 320D SE [10.00] 2005 645 [9.00]	Still need my alloys repaired. Ok - I'm running out of options now. I've tried a few places and have had no response so far. Anyone have any ideas of who I could contact to have my 19" BBS repaired. Two of them have very bad curb rash I'd really like these sorted out before the next meet. I'm in York so have no problem travelling to Leeds/Hull areas etc. __________________ My Photos
	Appreciate 0 Tweet Quote

03-31-2008, 07:21 AM	#2
mjh93sa Major General 147 Rep 5,080 Posts Drives: 530d Join Date: Dec 2005 Location: Gloucestershire iTrader: (0) Garage List 2012 BMW M135i [10.00] 2011 Mini Countryma ... [5.50]	The damage: and what it should look like: __________________ Gone: Fiesta - Focus - E46 320dSE - E91 330dMSport - E82 135iMSport - R55 JCW Clubman - M135i Now: 530d
	Appreciate 0 Quote

03-31-2008, 07:29 AM	#3
- Paul - Major General 695 Rep 7,308 Posts Drives: see above. Join Date: Apr 2005 Location: Yorkshire, UK iTrader: (5) Garage List 2005 320D SE [10.00] 2005 645 [9.00]	Cheers mate! __________________ My Photos
	Appreciate 0 Quote

03-31-2008, 07:35 AM	#4
sheps Colonel 73 Rep 2,396 Posts Drives: C63 AMG Join Date: Feb 2007 Location: Cambs, UK iTrader: (2)	Get yourself a courier sorted and get them here I have seen many examples of their work (not all mine, I'm not a serial wheel curber!!) and have always been impressed. My 3 piece Ferrari wheel was sent there when I had an argument with a curb (and lost) having spun on oil - see below. It came back as good as new. Fortunately I've not curbed a wheel since then but if I do, that's where they'll go to be done (that's where the 225M's will be going if I can't get the brake dust that's pitted-in, out) __________________ Gone but not forgotten: 325i M Sport (E92), Black Sapphire, Coral Red Dakota, 19" 225's, Seat Heating, 6FL and de-badge Replaced by 6.2 litres of AMG powered C class.
	Appreciate 0 Quote

03-31-2008, 08:01 AM	#5
Cafe.Racer Captain 27 Rep 896 Posts Drives: 320d Touring Join Date: Feb 2007 Location: Nottingham, UK iTrader: (1)	You might try http://www.selbys.co.uk/ in Nottingham, what I've seen them do to 911 Rear wheels (commonly smack hard against kerbs) is more than impressive. __________________ Phil
	Appreciate 0 Quote

03-31-2008, 08:50 AM	#6
steve-p Second Lieutenant 5 Rep 241 Posts Drives: 2012 ActiveHybrid 5 Join Date: Mar 2008 Location: Newbury, UK iTrader: (0)	Try phoning your local BMW dealer and ask who they use for refurbs on cars they take into stock. That's what I did with MB and they were happy to help.
	Appreciate 0 Quote

03-31-2008, 12:48 PM	#7
- Paul - Major General 695 Rep 7,308 Posts Drives: see above. Join Date: Apr 2005 Location: Yorkshire, UK iTrader: (5) Garage List 2005 320D SE [10.00] 2005 645 [9.00]	Thanks for the ideas and PM's - have contacted a few so will see what they come back with. __________________ My Photos
	Appreciate 0 Quote

03-31-2008, 02:11 PM	#9
SoYank Major General 571 Rep 7,519 Posts Drives: 2009 E90 335i MT Join Date: Mar 2006 Location: Vinton, Virginia iTrader: (1) Garage List 2009 BMW E90 335i S ... [9.00]	Paul, there's a place in Northallerton. Fenwick Alloy Wheel Refurbishing Centre Unit 4A Gaskell Close Standard Way Industrial Estate Northallerton, North Yorkshire DL6 2XE 08000 288911 www.alloywheelrefurbishing.co.uk I've seen their work and their facility and they seem rather good. Their brochure states that all work is guaranteed and fully insured. You're pretty close so it might be worth your while to take it up there. At worst you're out the time and gas, oops, diesel, for the trip. They quoted £50+VAT a wheel for what I need done to a set (and that was extensive). __________________ **2009 E90 335i Montego Blue · Black Leather · Burl Walnut · 6MT · US Spec** SatNav • ZPP • ZCW • 6FL • TPMS • iDrive • PDC • HWS • Xenons • BMW Assist • Power Rear Sunshade • Logic 7 European Taillights • Rear Foglamp • OEM Alarm • PicoTray • DataToys XM-DVR • Multi-view Processor Quaife ATB LSD • Short Shift Knob • Hartge Anti-Roll Bars • AP Racing Front Brakes • 19" Style 269 Last edited by SoYank; 03-31-2008 at 02:12 PM.. Reason: Added city and postcode
	Appreciate 0 Quote

03-31-2008, 03:19 PM	#11
AnthonyC New Member 2 Rep 8 Posts Drives: E90 320i SE Saloon Join Date: Mar 2008 Location: Sussex iTrader: (0)	They can be repaired by getting a good re-ferber to TIG weld new ally onto the rim, and then re-profiling the rim again on a lathe. Topped off with a polish or powder coat. Lepsons spring to mind www.lepsons.com Regards Anthony
	Appreciate 0 Quote

03-31-2008, 03:28 PM	#12
scooba0010 Colonel 156 Rep 2,349 Posts Drives: F32 430D-MOTORSPORT Join Date: Jun 2007 Location: UK iTrader: (1)	lepsons 100% My local wheel dealer uses lepsons and had no issues with them he advised me to use them .I have seen lots of wheels they have refurbished and i wouldnt use any body else they even will arrange collection and return
	Appreciate 0 Quote

03-31-2008, 03:48 PM	#13
Nohedes Private First Class 4 Rep 102 Posts Drives: E92 330d M-Sport (2008) Join Date: Aug 2007 Location: UK iTrader: (0)	I managed to kerb my offside rear 225M alloy a few weeks ago, and considered buying a new wheel (£500!!) before finding 'Pristine Wheels'. Firms recommended by others here may be a better bet due to geography, but I can heartily recommend Pristine for the quality of work - excellent colour match, and decent value at £106 all in. They are in Woburn Sands, Bedfordshire. PS: I have no connection with Pristine (or any other wheel refurbisher for that matter!). __________________ 330d M-Sport Coupe (E92 - Le Mans Blue - 19" Wheels 225M - Brushed Aluminium - Blue Shadow Cloth/Alcantara - Folding/Dimming Door Mirrors - Storage Package - Grey Tinted Shadeband - Floor Mats!)
	Appreciate 0 Quote

04-01-2008, 12:48 PM	#14
- Paul - Major General 695 Rep 7,308 Posts Drives: see above. Join Date: Apr 2005 Location: Yorkshire, UK iTrader: (5) Garage List 2005 320D SE [10.00] 2005 645 [9.00]	Well I've tried fenwick.... again and still no reply - maybe they don't read their emails? Looks like I'll have to resort to actually using the phone. I tend to only email. __________________ My Photos
	Appreciate 0 Quote

04-03-2008, 01:57 PM	#16
beemerbird Major General 172 Rep 7,953 Posts Drives: Merc diesel Join Date: Oct 2007 Location: Yorkshire iTrader: (0) Garage List 2010 TTRS [9.00] 2007 Audi S5 [0.00] May 2007 Porsche 99 ... [0.00] March 2007 Porsche ... [0.00] Sep. 2007 E92 335d SE [0.00] July 2006 E90 330i ... [0.00]	Paul have you got your alloys sorted yet? As guess what - yesterday I scuffed my nearside front alloy Some prat up too close and I had to park quickly - obviously I got too close to the friggin kerb. Thankfully, it is only a scuff. Anyhow, got in touch with the bloke who did my bonnet stone chips and he also does alloy wheel repairs. If he's any good, I could give you his number and check whether he'll travel to York?
	Appreciate 0 Quote

04-03-2008, 05:24 PM	#18
booforty Major General 337 Rep 8,811 Posts Drives: E92 M3 Join Date: Mar 2005 Location: London, UK iTrader: (0) Garage List 2008 E92 M3 [0.00]	First the MOT and now the alloys.... I'm expecting to see a 320d looking brand spanking new Paul!
	Appreciate 0 Quote

04-06-2008, 02:27 PM	#19
beemerbird Major General 172 Rep 7,953 Posts Drives: Merc diesel Join Date: Oct 2007 Location: Yorkshire iTrader: (0) Garage List 2010 TTRS [9.00] 2007 Audi S5 [0.00] May 2007 Porsche 99 ... [0.00] March 2007 Porsche ... [0.00] Sep. 2007 E92 335d SE [0.00] July 2006 E90 330i ... [0.00]	Paul - bloke is coming on my day off (Wednesday) to repair my alloy, so if you're still not sorted by then, I'll let you know if he's any good etc.
	Appreciate 0 Quote

04-06-2008, 04:34 PM	#20
SoYank Major General 571 Rep 7,519 Posts Drives: 2009 E90 335i MT Join Date: Mar 2006 Location: Vinton, Virginia iTrader: (1) Garage List 2009 BMW E90 335i S ... [9.00]	I thought I was going to have the record for quickest curb rash on Friday. I put my summer tires on last Sunday and crunched a curb on Friday on Foss Island Road in York with 34 miles on the rims. Muttering loudly to myself, I got out and fortunately found nothing. I have no idea what caused the sound. There doesn't appear to be any scrapes on either the rims or the bumper. Good luck with your repairs Helen and Paul. __________________ **2009 E90 335i Montego Blue · Black Leather · Burl Walnut · 6MT · US Spec** SatNav • ZPP • ZCW • 6FL • TPMS • iDrive • PDC • HWS • Xenons • BMW Assist • Power Rear Sunshade • Logic 7 European Taillights • Rear Foglamp • OEM Alarm • PicoTray • DataToys XM-DVR • Multi-view Processor Quaife ATB LSD • Short Shift Knob • Hartge Anti-Roll Bars • AP Racing Front Brakes • 19" Style 269
	Appreciate 0 Quote

04-08-2008, 11:25 AM	#21
- Paul - Major General 695 Rep 7,308 Posts Drives: see above. Join Date: Apr 2005 Location: Yorkshire, UK iTrader: (5) Garage List 2005 320D SE [10.00] 2005 645 [9.00]	Booked in with Fenwicks so they can quote this Sat. I'm guessing between £50 and £100 a wheel? __________________ My Photos
	Appreciate 0 Quote

04-08-2008, 12:44 PM	#22
scottc Lieutenant Colonel 699 Rep 1,641 Posts Drives: Mercedes E350 Cpe Join Date: May 2007 Location: UK iTrader: (0)	I have used wicked wheels for all of my wife's damage that she has done to my alloys
	Appreciate 0 Quote