E90Post
 


 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Powertrain and Drivetrain Discussions > N54 Turbo Engine / Drivetrain / Exhaust Modifications - 335i > DIY: N54 Injector Coding Via INPA



Reply
 
Thread Tools Search this Thread
      03-05-2012, 12:59 PM   #221
DJtoad
Captain
United_States
58
Rep
665
Posts

Drives: 2010 535i M Sport
Join Date: May 2008
Location: Ellicott City, MD

iTrader: (2)

I noticed that the MSD80 files in the INPA/SGDAT and EDIABAS/ECU directories don't appear to be model-specific so I decided to try this software distribution with my E60 535i. I'm happy to say it came right up and I was able to read my injector values. I didn't try to reset any but I have no reason to believe it wouldn't let me do so. Great work, vasillalov!
__________________
2010 535i M Sport - Platinum Gray/Dakota Black/Anthracite Bamboo
2016 Jaguar F-Type S AWD - Polar White/Cirrus
Appreciate 0
      03-05-2012, 01:13 PM   #222
Ndx
Second Lieutenant
No_Country
27
Rep
289
Posts

Drives: 335i
Join Date: May 2011
Location: CA NY

iTrader: (1)

Hi Guys,

Does this apply to 328 ?

or only 335 ?

Thx
Appreciate 0
      03-05-2012, 01:38 PM   #223
enrita
Major General
enrita's Avatar
Sweden
159
Rep
7,378
Posts

Drives: 335i - Big turbos
Join Date: Sep 2008
Location: Italian in Sweden

iTrader: (0)

Quote:
Originally Posted by Ndx View Post
Hi Guys,

Does this apply to 328 ?

or only 335 ?

Thx
applies to all e90.
__________________
07 335i AT - MOTIV 750 - MHD E85 BMS flash - BMS PI - JB4G5 - Okada Coils - NGK 5992 Plugs - Helix IC - Snow Stg. 3 - Stett CP - Custom midpipes with 100 HJS Cats - Bastuck Quad - PSS10 - QUAIFE LSD - BMS OCC - Forge DVs - AR OC - ALCON BBK - M3 Chassi - Dinan CP - Velocity M rear Toe arms - Advan RZ-DF - LUX H8 - Level 10 AT upgrade
Appreciate 0
      03-05-2012, 03:53 PM   #224
Joshboody
Lieutenant Colonel
65
Rep
1,708
Posts

Drives: pickemuptruck
Join Date: Jul 2009
Location: Phoenix, AZ

iTrader: (7)

tried again and no luck... get the same message sys 00010.
http://www.e90post.com/forums/showpo...8&postcount=25

The INPA doc says this:

3.1 EDIABAS error 100: sys-0010: Initialization error
Reason: this message comes when an SGBD has an automatic concept switch between multiple diagnostics logs and is not connected to the controller.
Solution: Connect the controller

I can connect, but it won't read any data once i get through the menu options. I'm using Vista, but my other computers are windows 7 64bit.
Appreciate 0
      03-05-2012, 04:47 PM   #225
335okc
Captain
335okc's Avatar
41
Rep
659
Posts

Drives: e90 335
Join Date: Feb 2011
Location: okc

iTrader: (0)

Quote:
Originally Posted by Joshboody View Post
tried again and no luck... get the same message sys 00010.
http://www.e90post.com/forums/showpo...8&postcount=25

The INPA doc says this:

3.1 EDIABAS error 100: sys-0010: Initialization error
Reason: this message comes when an SGBD has an automatic concept switch between multiple diagnostics logs and is not connected to the controller.
Solution: Connect the controller

I can connect, but it won't read any data once i get through the menu options. I'm using Vista, but my other computers are windows 7 64bit.
is it vista 32? i actually got that error 100 before. i got a handfull of different error so i'm not clear as to what fixed everything.
show us your front page
Appreciate 0
      03-05-2012, 09:10 PM   #226
cn555ic
cn555ic's Avatar
United_States
441
Rep
18,331
Posts

Drives: 335i
Join Date: Jun 2007
Location: US

iTrader: (6)

Quote:
Originally Posted by Joshboody View Post
tried again and no luck... get the same message sys 00010.
http://www.e90post.com/forums/showpo...8&postcount=25

The INPA doc says this:

3.1 EDIABAS error 100: sys-0010: Initialization error
Reason: this message comes when an SGBD has an automatic concept switch between multiple diagnostics logs and is not connected to the controller.
Solution: Connect the controller

I can connect, but it won't read any data once i get through the menu options. I'm using Vista, but my other computers are windows 7 64bit.
I just looked at Vasillovs DIY and did you follow it to the tee? If so did you enter the path variable as ;C:\ediabas\bin If you forgot that ; in front of last file it wont work and Ediabas is not connected.


Notice in the DIY it is not showing the ; for this step

Edit the Path Variable and make sure you append (add to the end) the following: C:\EDIABAS\BIN

It should be this ;C:\EDIABAS\BIN

Try that out if you missed this.
Appreciate 0
      03-05-2012, 09:53 PM   #227
335okc
Captain
335okc's Avatar
41
Rep
659
Posts

Drives: e90 335
Join Date: Feb 2011
Location: okc

iTrader: (0)

Quote:
Originally Posted by Joshboody View Post
tried again and no luck... get the same message sys 00010.
http://www.e90post.com/forums/showpo...8&postcount=25

The INPA doc says this:

3.1 EDIABAS error 100: sys-0010: Initialization error
Reason: this message comes when an SGBD has an automatic concept switch between multiple diagnostics logs and is not connected to the controller.
Solution: Connect the controller

I can connect, but it won't read any data once i get through the menu options. I'm using Vista, but my other computers are windows 7 64bit.
actually, did you make sure you're on map 0 and CAN clear off?
does your inpa detect ignition on when you first load it?
Appreciate 0
      03-05-2012, 10:33 PM   #228
Joshboody
Lieutenant Colonel
65
Rep
1,708
Posts

Drives: pickemuptruck
Join Date: Jul 2009
Location: Phoenix, AZ

iTrader: (7)

Yep did everythng above reconfirming all steps. I can connect with ign, battery dark and error showing when it tries to pull data. I'm thinking potentionally the cable, but i'd hate to buy another.

Vas and cn you all are both 07s... Do you have direct knowledge of a 08 having success? Okc, what build date are you? Im 10/2007. I thought i saw a later model e60 did this off of Vas's downloads.
Appreciate 0
      03-05-2012, 10:54 PM   #229
335okc
Captain
335okc's Avatar
41
Rep
659
Posts

Drives: e90 335
Join Date: Feb 2011
Location: okc

iTrader: (0)

my build date is 9 06. i did use cn's select files. maybe he's willing to send those files to you too ?
Appreciate 0
      03-06-2012, 06:44 AM   #230
cn555ic
cn555ic's Avatar
United_States
441
Rep
18,331
Posts

Drives: 335i
Join Date: Jun 2007
Location: US

iTrader: (6)

Quote:
Originally Posted by 335okc View Post
my build date is 9 06. i did use cn's select files. maybe he's willing to send those files to you too ?

Just forward the mail from me to him! Lol. Easy but I have a feeling that's not his issue.
Appreciate 0
      03-06-2012, 07:30 AM   #231
vasillalov
Mad Linux Guru On The Loose
vasillalov's Avatar
1112
Rep
5,389
Posts

Drives: 2008 335i Sedan, 2023 M3
Join Date: Aug 2009
Location: Chicago, IL

iTrader: (5)

Garage List
2023 BMW M3  [0.00]
2008 335i E90  [8.00]
Quote:
Originally Posted by Joshboody View Post
Yep did everythng above reconfirming all steps. I can connect with ign, battery dark and error showing when it tries to pull data. I'm thinking potentionally the cable, but i'd hate to buy another.

Vas and cn you all are both 07s... Do you have direct knowledge of a 08 having success? Okc, what build date are you? Im 10/2007. I thought i saw a later model e60 did this off of Vas's downloads.
Mine is a 2008 model. Build date 10/2007 with CANBUS.
__________________
6MT | COBB | AR | AE | Forge DV | HPF | P3 Gauge | Hybrid Intake | O.S.Giken TCD | All M3 bits | TCKLine | StopTech | UUC | ER | SPEC
Appreciate 0
      03-21-2012, 09:34 PM   #232
onebadmofo
Colonel
onebadmofo's Avatar
345
Rep
2,396
Posts

Drives: 2008 E90 M3
Join Date: Aug 2010
Location: Central NJ

iTrader: (14)

Similar issue here And I just put in new injectors. 12/06 build date.



I tried 4 version on files, Ediabas and two laptops
Most of other options work. BTW while there I've found an option to lower/raise the idle. Raised mine to 800 to keep that oil flowing in heat.

Appreciate 0
      03-21-2012, 10:19 PM   #233
onebadmofo
Colonel
onebadmofo's Avatar
345
Rep
2,396
Posts

Drives: 2008 E90 M3
Join Date: Aug 2010
Location: Central NJ

iTrader: (14)

Here's what I've done to troubleshoot.

Tried 5 version of Ediabas.
Tried different INPA assemblies.
Two known good cables.
Disable CANClear in Procede

Almost everything else in MSD80 works fine. I can play with cooling fans, water pump, etc. What I noticed though is that some options are not working unless I switch Procede to map 0 so I think that the last thing to try would be to remove it completely for now.

If that fails I'm fucked. I swapped injectors from a 535 that my friend traded in and don't have my old injectors anymore. Car drives more or less ok, but I haven't pushed it at all since the swap.
Appreciate 0
      03-21-2012, 10:24 PM   #234
vasillalov
Mad Linux Guru On The Loose
vasillalov's Avatar
1112
Rep
5,389
Posts

Drives: 2008 335i Sedan, 2023 M3
Join Date: Aug 2009
Location: Chicago, IL

iTrader: (5)

Garage List
2023 BMW M3  [0.00]
2008 335i E90  [8.00]
I think you may be using an older version of the MSD80.ipo file. Try the one from my zip. Also, all piggies must be set on full bypass mode. All CAN hijacking must be turned off.
__________________
6MT | COBB | AR | AE | Forge DV | HPF | P3 Gauge | Hybrid Intake | O.S.Giken TCD | All M3 bits | TCKLine | StopTech | UUC | ER | SPEC
Appreciate 0
      03-21-2012, 10:30 PM   #235
onebadmofo
Colonel
onebadmofo's Avatar
345
Rep
2,396
Posts

Drives: 2008 E90 M3
Join Date: Aug 2010
Location: Central NJ

iTrader: (14)

I was using your version as well.
Procede is disabled but I still think it may interfere. I know it does on N55 even when completely turned off. Will update tomorrow.

What tune you have?

BTW I have a Bulgarian friend, he sent me a link to music video by Azis. WTF dude?

Last edited by onebadmofo; 03-21-2012 at 11:15 PM..
Appreciate 0
      03-22-2012, 12:14 AM   #236
pinky_and_me
Second Lieutenant
pinky_and_me's Avatar
12
Rep
294
Posts

Drives: N54 335xi
Join Date: Feb 2011
Location: Cleveland, OH

iTrader: (0)

It works for me with Procede on map 4 and canclear on using vasillalov's files. And I coded few options as well. Shiv has mentioned several times that the Procede does not intercept anything when the engine is off.
Appreciate 0
      03-22-2012, 09:09 AM   #237
onebadmofo
Colonel
onebadmofo's Avatar
345
Rep
2,396
Posts

Drives: 2008 E90 M3
Join Date: Aug 2010
Location: Central NJ

iTrader: (14)

Well that's bad then. Like I said I already have new injectors installed and now I can't code them. Gonna try with ISTA-D, GT1 or Progman.
Appreciate 0
      03-22-2012, 10:09 AM   #238
cn555ic
cn555ic's Avatar
United_States
441
Rep
18,331
Posts

Drives: 335i
Join Date: Jun 2007
Location: US

iTrader: (6)

Quote:
Originally Posted by onebadmofo View Post
Well that's bad then. Like I said I already have new injectors installed and now I can't code them. Gonna try with ISTA-D, GT1 or Progman.
Come by the meet tonight in Brooklyn..(ceasars bay at 9pm) ..I will have my laptop with INPA working with Dcan cable.. I have an 07 that has never had a software update though...You can use my laptop and even take the INPA program file from me and code your injectors, but I doubt it is the program that you have, since you are far from a novice when it comes to coding...Should take the most 5 minutes if you have all the values copied down for each cylinder....You are the king of coding from what I hear so there is definitely some other issues IMO, but what can it be.. Do you have the latest and greatest update of ECU software. I read somewhere that BMW is coming out with new daten files and INPA 5.06..

BTW...When my Procede is not set to valet, INPA does not read the OBD readiness flags, so there is some truth to it that some functions wont work when Procede is on either map 1,2,3 or 4

Last edited by cn555ic; 03-22-2012 at 10:17 AM..
Appreciate 0
      03-22-2012, 08:34 PM   #239
onebadmofo
Colonel
onebadmofo's Avatar
345
Rep
2,396
Posts

Drives: 2008 E90 M3
Join Date: Aug 2010
Location: Central NJ

iTrader: (14)

Removed Procede, still no go.
Called up a friend, gonna code 'em with Autologic
Appreciate 0
      03-22-2012, 08:53 PM   #240
vasillalov
Mad Linux Guru On The Loose
vasillalov's Avatar
1112
Rep
5,389
Posts

Drives: 2008 335i Sedan, 2023 M3
Join Date: Aug 2009
Location: Chicago, IL

iTrader: (5)

Garage List
2023 BMW M3  [0.00]
2008 335i E90  [8.00]
Quote:
Originally Posted by Joshboody View Post
Yep did everythng above reconfirming all steps. I can connect with ign, battery dark and error showing when it tries to pull data. I'm thinking potentionally the cable, but i'd hate to buy another.

Vas and cn you all are both 07s... Do you have direct knowledge of a 08 having success? Okc, what build date are you? Im 10/2007. I thought i saw a later model e60 did this off of Vas's downloads.
MIne is a 2008 model. I've said this 10 times already LOL. My build date is 10/2007 but it is a 2008 model.
__________________
6MT | COBB | AR | AE | Forge DV | HPF | P3 Gauge | Hybrid Intake | O.S.Giken TCD | All M3 bits | TCKLine | StopTech | UUC | ER | SPEC
Appreciate 0
      03-24-2012, 10:07 PM   #241
Joshboody
Lieutenant Colonel
65
Rep
1,708
Posts

Drives: pickemuptruck
Join Date: Jul 2009
Location: Phoenix, AZ

iTrader: (7)

success... finally. Thanks guys for the advise. Ended up being the order in which cable is connected and turning on the ignition believe it or not.
BTW: with procede you don't have to be in map0

Now we need a new thread in the tech session with DIYs of the different things you can do with INPA... I'm timid to go beyond just looking at each Fx screen.
Appreciate 0
      03-24-2012, 10:11 PM   #242
onebadmofo
Colonel
onebadmofo's Avatar
345
Rep
2,396
Posts

Drives: 2008 E90 M3
Join Date: Aug 2010
Location: Central NJ

iTrader: (14)

Figured out my issue as well. All the versions of Ediabas i had were 6, this thing needs 7.2. Feel like an idiot.

What is weird is that one of my injectors is way off than the rest of them, that's not a concern once it's programmed right, right?

#1 - 573 232
#2 - 576 220
#3 - 586 227
#4 - 580 184
#5 - 579 223
#6 - 582 213
Appreciate 0
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 08:00 AM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST