evotech stage 3

335twins · 03-13-2012, 11:39 PM

Hi,

I am looking to modify my 335i to get more power out of it. I was wondering if anyone has evotech stage 3 on their cars?

found this performance local shop and would like some input; I would like to have ~340whp and ~370wtq:

http://www.dynocomp.com/details.php?...=90#detail_328

any other shops that someone would recommend i should look at?

Thanks

ruphianh · 03-13-2012, 11:43 PM

Quote:

Originally Posted by 335twins

Hi,

I am looking to modify my 335i to get more power out of it. I was wondering if anyone has evotech stage 3 on their cars?

found this performance local shop and would like some input:

http://www.dynocomp.com/details.php?...=90#detail_328

Thanks

Expensive. Check out any other main tune on this site. More power, less money.

secretsquirrel · 03-14-2012, 12:33 AM

^^^this man speaks the truth. Plus you'll have thousands of users running any one of the main 3 tunes, so support issues are often solved by a quick search.

Brey335i · 03-14-2012, 12:51 AM

Way too expensive. COBB, Procede, JB4 are all better options

Dark9T · 03-14-2012, 02:52 AM

Look up Cobb ap,procede and JB4...

335twins · 03-14-2012, 08:44 AM

Thanks for the fast replies. I spoke to the tuner before and it sounded like they were going to give me a better deal on it. I did some research and found cobb accessport, i like it because of the ease of use. Is it possible to get close to 350whp and 370wtq with cobb on crappy octane 91? I seen the numbers with stage 1 (extra ~60whp and ~70wtq). I think i would need stage 2 to get close to the number im looking for, correct? i was told that downpipes (AR, active autowerke), intercooler (AR, AMS, active autowerke) plus drop in filter (BMC,Afe, K&N) will give the most increase in power.

Thanks

enrita · 03-14-2012, 09:04 AM

Quote:

Originally Posted by 335twins

Thanks for the fast replies. I spoke to the tuner before and it sounded like they were going to give me a better deal on it. I did some research and found cobb accessport, i like it because of the ease of use. Is it possible to get close to 350whp and 370wtq with cobb on crappy octane 91? I seen the numbers with stage 1 (extra ~60whp and ~70wtq). I think i would need stage 2 to get close to the number im looking for, correct? i was told that downpipes (AR, active autowerke), intercooler (AR, AMS, active autowerke) plus drop in filter (BMC,Afe, K&N) will give the most increase in power.

Thanks

Stage 1+ will give you more power than Stage 2 (which requires downpipes). Also more consistent power because of lower IATs especially if you live in a warm place.
For that you need an aftermarket intercooler like Helix or ETS . There are much more around just search.

Otherwise go All in with IC, dps and intake and run Stage 2+ which will net you over 90 whp.

Robert@vishnu · 03-14-2012, 12:17 PM

If you are only looking to make 340/370 I can assist you with that. With ONLY the Procede installed you will make around 350~360whp and 370~380wtq. Procede will give you consistent power run after run and it is certainly one of the most powerful and safe tune. If you have any specific questions you would like to know about what we offer send me a pm/call us/email us and I will be able to assist you.

Regards,
Robert@Vishnu

jasonX · 03-14-2012, 12:30 PM

Quote:

Originally Posted by enrita

Stage 1+ will give you more power than Stage 2 (which requires downpipes). Also more consistent power because of lower IATs especially if you live in a warm place.
For that you need an aftermarket intercooler like Helix or ETS . There are much more around just search.

Otherwise go All in with IC, dps and intake and run Stage 2+ which will net you over 90 whp.

Not doubting you, but any source to this claim?

themyst · 03-14-2012, 12:46 PM

Quote:

Originally Posted by jasonX

Not doubting you, but any source to this claim?

The Stage1+FMIC maps he is referring to has tuning to take advantage of the benefits of an aftermarket intercooler. It's in the map description on your AP once you transfer the map file to your unit.

335twins · 03-14-2012, 12:56 PM

vishnu, i need 5 posts to send you a private message...

jasonX · 03-14-2012, 01:12 PM

Quote:

Originally Posted by themyst

The Stage1+FMIC maps he is referring to has tuning to take advantage of the benefits of an aftermarket intercooler. It's in the map description on your AP once you transfer the map file to your unit.

I was under the impression he meant a Stage 1+ with required mods (Aftermarket FMIC) would perform better then a Stage 2 (with aftermarket Downpipes).

E90SoFlo · 03-14-2012, 01:14 PM

Quote:

Originally Posted by 335twins

vishnu, i need 5 posts to send you a private message...

Just so you know, Vishnu is the company that makes the Proceede.

Bme30 · 03-14-2012, 01:48 PM

Quote:

Originally Posted by 335twins

vishnu, i need 5 posts to send you a private message...

sales@vishnutuning.com

335twins · 03-14-2012, 02:00 PM

Quote:

Originally Posted by E90SoFlo

Just so you know, Vishnu is the company that makes the Proceede.

oops, missed Robert in front of it. sorry...

lawwailok · 03-14-2012, 02:50 PM

i have cobb S1+ with ETS FMIC, running on crappy 91 gas, using the "virtual dyno" can be downloaded on the forum here, plugged in my 3rd gear pull data log, results was 335whp/389wtq.

enrita · 03-14-2012, 03:43 PM

Quote:

Originally Posted by jasonX

Not doubting you, but any source to this claim?

Cobb....
Search is your friend.
http://www.e90post.com/forums/showpo...5&postcount=56

335twins · 03-14-2012, 11:49 PM

i really like cobb as it gives decent power and its so much easier to use. I am not sure how my dealer would react if they see a module (Jb4 or proceede) inside the engine..

03-13-2012, 11:39 PM	#1
335twins Captain 142 Rep 737 Posts Drives: 2020 x3 M40i, 2019 M2Comp Join Date: Mar 2012 Location: AZ iTrader: (1)	evotech stage 3 Hi, I am looking to modify my 335i to get more power out of it. I was wondering if anyone has evotech stage 3 on their cars? found this performance local shop and would like some input; I would like to have ~340whp and ~370wtq: http://www.dynocomp.com/details.php?...=90#detail_328 any other shops that someone would recommend i should look at? Thanks
	Appreciate 0 Tweet Quote

03-14-2012, 12:33 AM	#3
secretsquirrel Colonel 130 Rep 2,291 Posts Drives: f80 Join Date: Dec 2010 Location: Far North Dallas iTrader: (2)	^^^this man speaks the truth. Plus you'll have thousands of users running any one of the main 3 tunes, so support issues are often solved by a quick search.
	Appreciate 0 Quote

03-14-2012, 12:51 AM	#4
Brey335i Banned 112 Rep 4,771 Posts Drives: e46 ///M3 Join Date: Oct 2009 Location: Austin, TX iTrader: (11)	Way too expensive. COBB, Procede, JB4 are all better options
	Appreciate 0 Quote

03-14-2012, 02:52 AM	#5
Dark9T Captain 26 Rep 660 Posts Drives: 2010 Red 335i E92 AT Join Date: Jun 2011 Location: las vegas iTrader: (0)	Look up Cobb ap,procede and JB4... __________________ PROcede REV3+OpenFlash "Custom DynoTune" //Vishnu PWM Meth kit//AIS Meth Tank//18" Forgestar F14//BridgeStone RE11//WaveTrac LSD n M3 Bushing// KW V3 Coilovers//ETS 6.25" FMIC//MS Ceramic Coated 3" DPs//aFe DCI//M3 style body kits//HPF GEN2 Exhaust//Performance CF Trunk Lip//FFTEC walbro 450 inline pump kit//
	Appreciate 0 Quote

03-14-2012, 08:44 AM	#6
335twins Captain 142 Rep 737 Posts Drives: 2020 x3 M40i, 2019 M2Comp Join Date: Mar 2012 Location: AZ iTrader: (1)	Thanks for the fast replies. I spoke to the tuner before and it sounded like they were going to give me a better deal on it. I did some research and found cobb accessport, i like it because of the ease of use. Is it possible to get close to 350whp and 370wtq with cobb on crappy octane 91? I seen the numbers with stage 1 (extra ~60whp and ~70wtq). I think i would need stage 2 to get close to the number im looking for, correct? i was told that downpipes (AR, active autowerke), intercooler (AR, AMS, active autowerke) plus drop in filter (BMC,Afe, K&N) will give the most increase in power. Thanks
	Appreciate 0 Quote

03-14-2012, 12:17 PM	#8
Robert@vishnu 28 Rep 212 Posts Drives: Corvette C6 Z06 Join Date: Oct 2008 Location: Danville iTrader: (2)	340/370 If you are only looking to make 340/370 I can assist you with that. With ONLY the Procede installed you will make around 350~360whp and 370~380wtq. Procede will give you consistent power run after run and it is certainly one of the most powerful and safe tune. If you have any specific questions you would like to know about what we offer send me a pm/call us/email us and I will be able to assist you. Regards, Robert@Vishnu
	Appreciate 0 Quote

03-14-2012, 12:56 PM	#11
335twins Captain 142 Rep 737 Posts Drives: 2020 x3 M40i, 2019 M2Comp Join Date: Mar 2012 Location: AZ iTrader: (1)	vishnu, i need 5 posts to send you a private message...
	Appreciate 0 Quote

03-14-2012, 02:50 PM	#16
lawwailok Lieutenant Colonel 146 Rep 1,922 Posts Drives: E90 335i, E70 X5 Join Date: Aug 2009 Location: Sacramento, CA iTrader: (18) Garage List 2007 E90 335i [8.00] 2009 E70 xDrive30i [0.00]	i have cobb S1+ with ETS FMIC, running on crappy 91 gas, using the "virtual dyno" can be downloaded on the forum here, plugged in my 3rd gear pull data log, results was 335whp/389wtq. __________________ -eric E90 335i TiAg STOCK see my garage for mod list.. E70 X5 SGM try to stay stock :/
	Appreciate 0 Quote

03-14-2012, 11:49 PM	#18
335twins Captain 142 Rep 737 Posts Drives: 2020 x3 M40i, 2019 M2Comp Join Date: Mar 2012 Location: AZ iTrader: (1)	i really like cobb as it gives decent power and its so much easier to use. I am not sure how my dealer would react if they see a module (Jb4 or proceede) inside the engine..
	Appreciate 0 Quote