E90Post
 


TNT Racewerks
 
BMW 3-Series (E90 E92) Forum > BMW E90/E92/E93 3-series General Forums > Regional Forums > Australia > Caliper adapter fabricator in Sydney



Reply
 
Thread Tools Search this Thread
      05-07-2016, 08:40 AM   #1
WatashiEd
Second Lieutenant
WatashiEd's Avatar
Australia
28
Rep
270
Posts

Drives: 2015 F82 M4 DCT
Join Date: Mar 2016
Location: Sydney, Australia

iTrader: (0)

Caliper adapter fabricator in Sydney

Hi guys, got a set of Brembo BM5 6-piston front 4-piston rear caliper with 380mm front rotors and 350mm rear rotors off a cayenne S that I am planning on fitting to my the e90 but will need some holes on the rotors to be re-drilled to the correct PCD and mod on the caliper adapter to make it fit, tried to search around the forum but couldn't find anything.

Does anyone know where would be a good place to visit in Sydney for this job for good quality that wouldn't cost an arm and leg?







__________________
Sapphire Black M4 | iPE - Valvetronic exhaust | VRSF 3″ catless dp | Bootmod 3 Stage 2 | OEM LED alcantara steering wheel | OEM M4 GTS CF hood | Vorsteiner GT wing | M Performance CF splitter | Vorsteiner CF front lip | M Performance CF side skirt extension | 3D CF diffuser | OEM CF mirror cap | H&R lower spring | Rays Engineering TE37 Ultra Bronze 20x10F 20x11R
Appreciate 0
      05-07-2016, 11:41 AM   #2
EB89
Brigadier General
EB89's Avatar
Australia
541
Rep
3,131
Posts

Drives: 2011 335i e92 DCT
Join Date: Sep 2015
Location: Australia, NSW

iTrader: (0)

Garage List
Nice looking brakes, good luck with fitting them
__________________
/ MHD Stage 2+ / AR CATLESS DP / PE MOD 4 INCH TIPS / BMR FMIC / K&N DROP IN / BMS CP /
Appreciate 0
      05-07-2016, 04:59 PM   #3
WatashiEd
Second Lieutenant
WatashiEd's Avatar
Australia
28
Rep
270
Posts

Drives: 2015 F82 M4 DCT
Join Date: Mar 2016
Location: Sydney, Australia

iTrader: (0)

Quote:
Originally Posted by EB89 View Post
Nice looking brakes, good luck with fitting them
Thanks Elliott!!

Gonna rebuild the seals, clean the pistons and repaint them before going in, any suggestion on what color to paint?? My car is red btw
__________________
Sapphire Black M4 | iPE - Valvetronic exhaust | VRSF 3″ catless dp | Bootmod 3 Stage 2 | OEM LED alcantara steering wheel | OEM M4 GTS CF hood | Vorsteiner GT wing | M Performance CF splitter | Vorsteiner CF front lip | M Performance CF side skirt extension | 3D CF diffuser | OEM CF mirror cap | H&R lower spring | Rays Engineering TE37 Ultra Bronze 20x10F 20x11R

Last edited by WatashiEd; 05-08-2016 at 06:08 AM..
Appreciate 0
      05-07-2016, 08:04 PM   #4
EB89
Brigadier General
EB89's Avatar
Australia
541
Rep
3,131
Posts

Drives: 2011 335i e92 DCT
Join Date: Sep 2015
Location: Australia, NSW

iTrader: (0)

Garage List
Quote:
Originally Posted by EdDie_TurboN52 View Post
Thanks Elliott!!

Gonna build the seals, clean the pistons and repaint them before going in, any suggestion on what color to paint?? My car is red btw
If I owned them I would make them orange but that's my fav colour haha, on a red car.... Depends on your wheel colour I think.

Gloss black, bright blue, I'm not too sure, what were you thinking?
__________________
/ MHD Stage 2+ / AR CATLESS DP / PE MOD 4 INCH TIPS / BMR FMIC / K&N DROP IN / BMS CP /
Appreciate 0
      05-07-2016, 09:09 PM   #5
NeT335
Major
NeT335's Avatar
Albania
155
Rep
1,486
Posts

Drives: e92 335i M-Sport
Join Date: Feb 2014
Location: Melbourne Australia

iTrader: (0)

Either red or yellow on your car. Or gold
Appreciate 0
      05-07-2016, 09:14 PM   #6
vtl
Brigadier General
vtl's Avatar
Australia
1492
Rep
3,148
Posts

Drives: 2008 BMW 135i MT
Join Date: Apr 2015
Location: Melbourne, Australia

iTrader: (0)

Stock rear handbrake won't fit the new discs either
__________________
Appreciate 0
      05-07-2016, 10:00 PM   #7
CashedUpBogan
Lieutenant Colonel
281
Rep
1,808
Posts

Drives: State Transit Bus
Join Date: Sep 2014
Location: Australia

iTrader: (0)

kind of overkill for your N52 lol
I can sell you my 335i brakes for 500 bucks if the job ends up being too hard (expensive)
Appreciate 0
      05-07-2016, 10:15 PM   #8
Trev88
Lieutenant Colonel
Australia
182
Rep
1,543
Posts

Drives: 320d e90 LCI
Join Date: Jun 2014
Location: Melbourne

iTrader: (0)

Go with m sport blue! Haha looks awesome! How much did that cost you?
Appreciate 0
      05-08-2016, 01:38 AM   #9
EB89
Brigadier General
EB89's Avatar
Australia
541
Rep
3,131
Posts

Drives: 2011 335i e92 DCT
Join Date: Sep 2015
Location: Australia, NSW

iTrader: (0)

Garage List
Get some vinyls stickers for them "BMW" and clear coat over the top.https://www.ebay.com.au/ulk/itm/262048818646
__________________
/ MHD Stage 2+ / AR CATLESS DP / PE MOD 4 INCH TIPS / BMR FMIC / K&N DROP IN / BMS CP /
Appreciate 0
      05-08-2016, 05:25 AM   #10
dane083
Private First Class
19
Rep
126
Posts

Drives: 2011 135i
Join Date: Jul 2015
Location: Melbourne Aus

iTrader: (0)

These guys made my adapters when i had porsche brakes on my E46

http://www.rallyroad.net
Appreciate 0
      05-08-2016, 06:12 AM   #11
WatashiEd
Second Lieutenant
WatashiEd's Avatar
Australia
28
Rep
270
Posts

Drives: 2015 F82 M4 DCT
Join Date: Mar 2016
Location: Sydney, Australia

iTrader: (0)

Quote:
Originally Posted by EB89 View Post
If I owned them I would make them orange but that's my fav colour haha, on a red car.... Depends on your wheel colour I think.

Gloss black, bright blue, I'm not too sure, what were you thinking?
Quote:
Originally Posted by GeTiNQ View Post
Either red or yellow on your car. Or gold
Quote:
Originally Posted by Trev88 View Post
Go with m sport blue! Haha looks awesome! How much did that cost you?
I thought about Red and Orange too, but a bit too close colour to the body. Blue is sooooo cool but doesn't seem to match Red body, think I might go with Gold!!

__________________
Sapphire Black M4 | iPE - Valvetronic exhaust | VRSF 3″ catless dp | Bootmod 3 Stage 2 | OEM LED alcantara steering wheel | OEM M4 GTS CF hood | Vorsteiner GT wing | M Performance CF splitter | Vorsteiner CF front lip | M Performance CF side skirt extension | 3D CF diffuser | OEM CF mirror cap | H&R lower spring | Rays Engineering TE37 Ultra Bronze 20x10F 20x11R
Appreciate 0
      05-08-2016, 06:13 AM   #12
WatashiEd
Second Lieutenant
WatashiEd's Avatar
Australia
28
Rep
270
Posts

Drives: 2015 F82 M4 DCT
Join Date: Mar 2016
Location: Sydney, Australia

iTrader: (0)

Quote:
Originally Posted by vtl View Post
Stock rear handbrake won't fit the new discs either
Why's that Vince??
__________________
Sapphire Black M4 | iPE - Valvetronic exhaust | VRSF 3″ catless dp | Bootmod 3 Stage 2 | OEM LED alcantara steering wheel | OEM M4 GTS CF hood | Vorsteiner GT wing | M Performance CF splitter | Vorsteiner CF front lip | M Performance CF side skirt extension | 3D CF diffuser | OEM CF mirror cap | H&R lower spring | Rays Engineering TE37 Ultra Bronze 20x10F 20x11R
Appreciate 0
      05-08-2016, 06:17 AM   #13
vtl
Brigadier General
vtl's Avatar
Australia
1492
Rep
3,148
Posts

Drives: 2008 BMW 135i MT
Join Date: Apr 2015
Location: Melbourne, Australia

iTrader: (0)

Quote:
Originally Posted by EdDie_TurboN52 View Post
Why's that Vince??
Rear hand brake on a BMW is a drum brake that fits on the inside of the rear disc brake. If you are fitting a completely different disc then the diameter and offset will be different, requiring a new hand brake assembly.
__________________
Appreciate 0
      05-08-2016, 06:18 AM   #14
WatashiEd
Second Lieutenant
WatashiEd's Avatar
Australia
28
Rep
270
Posts

Drives: 2015 F82 M4 DCT
Join Date: Mar 2016
Location: Sydney, Australia

iTrader: (0)

Quote:
Originally Posted by CashedUpBogan View Post
kind of overkill for your N52 lol
I can sell you my 335i brakes for 500 bucks if the job ends up being too hard (expensive)
I am doing it up with N55 kit on GTX35 single turbo, will likely hit 350hp at 11psi at safe tune, going the same path as Jayson from Jamsco Auto in Florida, but I am actually an auditor, so work is very demanding, that's why everything is happening slowly when I have time that do not need to work in night for work-related stuff....

http://www.e90post.com/forums/showthread.php?t=1223874
__________________
Sapphire Black M4 | iPE - Valvetronic exhaust | VRSF 3″ catless dp | Bootmod 3 Stage 2 | OEM LED alcantara steering wheel | OEM M4 GTS CF hood | Vorsteiner GT wing | M Performance CF splitter | Vorsteiner CF front lip | M Performance CF side skirt extension | 3D CF diffuser | OEM CF mirror cap | H&R lower spring | Rays Engineering TE37 Ultra Bronze 20x10F 20x11R
Appreciate 0
      05-08-2016, 06:19 AM   #15
WatashiEd
Second Lieutenant
WatashiEd's Avatar
Australia
28
Rep
270
Posts

Drives: 2015 F82 M4 DCT
Join Date: Mar 2016
Location: Sydney, Australia

iTrader: (0)

Quote:
Originally Posted by Trev88 View Post
Go with m sport blue! Haha looks awesome! How much did that cost you?
I thought about that!! But bugger my body is red....
__________________
Sapphire Black M4 | iPE - Valvetronic exhaust | VRSF 3″ catless dp | Bootmod 3 Stage 2 | OEM LED alcantara steering wheel | OEM M4 GTS CF hood | Vorsteiner GT wing | M Performance CF splitter | Vorsteiner CF front lip | M Performance CF side skirt extension | 3D CF diffuser | OEM CF mirror cap | H&R lower spring | Rays Engineering TE37 Ultra Bronze 20x10F 20x11R
Appreciate 0
      05-08-2016, 06:21 AM   #16
WatashiEd
Second Lieutenant
WatashiEd's Avatar
Australia
28
Rep
270
Posts

Drives: 2015 F82 M4 DCT
Join Date: Mar 2016
Location: Sydney, Australia

iTrader: (0)

Quote:
Originally Posted by dane083 View Post
These guys made my adapters when i had porsche brakes on my E46

http://www.rallyroad.net
OMG their price is very competitive Dane!! Seems like I can get both end adapters done up within $500!! What about re-drilling holes to 5x120 PCD, how much did it set you back?
__________________
Sapphire Black M4 | iPE - Valvetronic exhaust | VRSF 3″ catless dp | Bootmod 3 Stage 2 | OEM LED alcantara steering wheel | OEM M4 GTS CF hood | Vorsteiner GT wing | M Performance CF splitter | Vorsteiner CF front lip | M Performance CF side skirt extension | 3D CF diffuser | OEM CF mirror cap | H&R lower spring | Rays Engineering TE37 Ultra Bronze 20x10F 20x11R
Appreciate 0
      05-08-2016, 06:24 AM   #17
WatashiEd
Second Lieutenant
WatashiEd's Avatar
Australia
28
Rep
270
Posts

Drives: 2015 F82 M4 DCT
Join Date: Mar 2016
Location: Sydney, Australia

iTrader: (0)

Quote:
Originally Posted by EdDie_TurboN52 View Post
I thought about that!! But bugger my body is red....
Forgot to mention, I got it cheap, $2k for the whole set including calipers, rotors, braided lines, DS2500 pads, winning
__________________
Sapphire Black M4 | iPE - Valvetronic exhaust | VRSF 3″ catless dp | Bootmod 3 Stage 2 | OEM LED alcantara steering wheel | OEM M4 GTS CF hood | Vorsteiner GT wing | M Performance CF splitter | Vorsteiner CF front lip | M Performance CF side skirt extension | 3D CF diffuser | OEM CF mirror cap | H&R lower spring | Rays Engineering TE37 Ultra Bronze 20x10F 20x11R
Appreciate 0
      05-08-2016, 06:28 AM   #18
Trev88
Lieutenant Colonel
Australia
182
Rep
1,543
Posts

Drives: 320d e90 LCI
Join Date: Jun 2014
Location: Melbourne

iTrader: (0)

Quote:
Originally Posted by EdDie_TurboN52 View Post
Forgot to mention, I got it cheap, $2k for the whole set including calipers, rotors, braided lines, DS2500 pads, winning
Wow that's a steal!!
Appreciate 0
      05-08-2016, 06:30 AM   #19
WatashiEd
Second Lieutenant
WatashiEd's Avatar
Australia
28
Rep
270
Posts

Drives: 2015 F82 M4 DCT
Join Date: Mar 2016
Location: Sydney, Australia

iTrader: (0)

Quote:
Originally Posted by vtl View Post
Rear hand brake on a BMW is a drum brake that fits on the inside of the rear disc brake. If you are fitting a completely different disc then the diameter and offset will be different, requiring a new hand brake assembly.
Ohhhh F.... thought it was a matter of fabricating the calipers adapters, correct PCD and center bore that's it... Cause I am running 19" 220m, should have enough clearance both both rotors...

So what handbrake will needed to be fitted in for the job Vince??
__________________
Sapphire Black M4 | iPE - Valvetronic exhaust | VRSF 3″ catless dp | Bootmod 3 Stage 2 | OEM LED alcantara steering wheel | OEM M4 GTS CF hood | Vorsteiner GT wing | M Performance CF splitter | Vorsteiner CF front lip | M Performance CF side skirt extension | 3D CF diffuser | OEM CF mirror cap | H&R lower spring | Rays Engineering TE37 Ultra Bronze 20x10F 20x11R
Appreciate 0
      05-08-2016, 06:30 AM   #20
Trev88
Lieutenant Colonel
Australia
182
Rep
1,543
Posts

Drives: 320d e90 LCI
Join Date: Jun 2014
Location: Melbourne

iTrader: (0)

Quote:
Originally Posted by EdDie_TurboN52 View Post
I thought about that!! But bugger my body is red....
Thought it would make the look more sleek! Haha not too flashy! But if you're going flashy go Yellow or Gold!
Appreciate 0
      05-08-2016, 06:32 AM   #21
WatashiEd
Second Lieutenant
WatashiEd's Avatar
Australia
28
Rep
270
Posts

Drives: 2015 F82 M4 DCT
Join Date: Mar 2016
Location: Sydney, Australia

iTrader: (0)

Quote:
Originally Posted by Trev88 View Post
Wow that's a steal!!
Yea I know, in pretty good condition too, except the funny green color, can't complaint actually hehehehe
__________________
Sapphire Black M4 | iPE - Valvetronic exhaust | VRSF 3″ catless dp | Bootmod 3 Stage 2 | OEM LED alcantara steering wheel | OEM M4 GTS CF hood | Vorsteiner GT wing | M Performance CF splitter | Vorsteiner CF front lip | M Performance CF side skirt extension | 3D CF diffuser | OEM CF mirror cap | H&R lower spring | Rays Engineering TE37 Ultra Bronze 20x10F 20x11R
Appreciate 0
      05-08-2016, 06:33 AM   #22
Trev88
Lieutenant Colonel
Australia
182
Rep
1,543
Posts

Drives: 320d e90 LCI
Join Date: Jun 2014
Location: Melbourne

iTrader: (0)

Quote:
Originally Posted by EdDie_TurboN52 View Post
Yea I know, in pretty good condition too, except the funny green color, can't complaint actually hehehehe
Hey ed! Did u just buy my cf spoiler?
Appreciate 0
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 01:50 PM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST