E90Post
 


TNT Racewerks
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Powertrain and Drivetrain Discussions > N54 Turbo Engine / Drivetrain / Exhaust Modifications - 335i > HPF FMIC...



Reply
 
Thread Tools Search this Thread
      05-06-2010, 06:52 PM   #1
pander5
Special Forces - Discretion is superior
pander5's Avatar
31
Rep
1,011
Posts

Drives: 335i Coupe Sapphire Black
Join Date: Mar 2006
Location: Tampa, FL

iTrader: (0)

Garage List
2007 335i Coupe  [0.00]
HPF FMIC...

Sorry for what many here will simply call "newbie exhuberance" but I just had the guys at Lutz Performance in Tampa install my HPF FMIC this afternoon. Freakin' incredible. So far I have Shiv's PROcede, AR Design 3" catless DP's, DCI, UUC SSK and now the HPF FMIC (and just in time for it to start really heating up here in FL!). Now it's on with suspension and brake upgrades!!!

Thanks Diego, Andrew and Patrick!

Again, I realize a bunch here are WAY ahead of me with regard to performance enhancing the N54 but for many who lurk and are similar to my situation (and relative lack of tuning experience) with slow but progressive upgrades these things turn out more fun than humans should be allowed to have. Incrementally they add up to a whole 'nother level.
__________________
M3 + trailer hitch = oxymoron

Last edited by pander5; 05-07-2010 at 06:04 AM..
Appreciate 0
      05-06-2010, 07:20 PM   #2
onefastman
Major General
159
Rep
5,689
Posts

Drives: 2009 135i 2011 e92m dct
Join Date: Sep 2009
Location: Earth

iTrader: (15)

Nice, the hpf fmic looks like a quality piece. I would do meth next, it will drop your iat's like crazy
__________________
Legal Disclaimer: Anything I or anyone else says about my vehicle on this website(1addicts.com or any affiliated or nonaffiliated sites), pertaining to modifications, is only to gain acceptance from my/our peers, and does not actually represent anything actually existing on my car, and thus, cannot be held against me in any issues, i.e. warranty claims, that may arise.
Appreciate 0
      05-06-2010, 08:55 PM   #3
cn555ic
cn555ic's Avatar
United_States
441
Rep
18,331
Posts

Drives: 335i
Join Date: Jun 2007
Location: US

iTrader: (6)

Congrats on the new purchase and install of the HPF intercooler...I have it for about 2 and half months and its finally getting warmer around the East Coast and I have to say its working very efficient..With warmer weather I don't see my boost getting any higher do to the pressure drop of the intercooler, plus IATs are drastically lower than the stocker, that doesn't come as a surprise!
Appreciate 0
      05-06-2010, 11:48 PM   #4
jmac1984
Private
jmac1984's Avatar
3
Rep
57
Posts

Drives: Alpine White 335i
Join Date: Apr 2010
Location: Fayettville NC

iTrader: (0)

get some pics up of that. i'm thinking of getting one of these up on my 335i.
__________________
'07 AW 335i, black leather, brushed aluminum trim, comfort, sport, and premium packages, steptronic, STETT charge pipe, tial BOV, STETT CAI, JB3 pnp (map 5 for now), HPF intercooler, air scoops behind grilles, vacuum line mod, matte black grill, debadged, black and white roundels, 35% tint all the way around.
Appreciate 0
      05-07-2010, 12:08 AM   #5
dlbrooks18
Brigadier General
dlbrooks18's Avatar
161
Rep
3,736
Posts

Drives: e90 335i
Join Date: Nov 2008
Location: Los Angeles

iTrader: (2)

nice!
__________________

2008 E90 335
Appreciate 0
      05-07-2010, 12:27 AM   #6
AltecBX
Colonel
AltecBX's Avatar
United_States
324
Rep
2,663
Posts

Drives: BMW 335xi Sedan; BMW M3 ZCP
Join Date: Nov 2007
Location: NYC

iTrader: (0)

Garage List
2018 BMW M3 ZCP  [0.00]
2007 BMW 335Xi  [0.00]
I to have looked at aftermarket ic. I haven't ordered one because I decided to do meth instead. With the advantages of meth on the cooling Diderot and the octane raising levels, why upgrade to a fmic? Sure it will even much cooler, but $900 on a meth kit makes more sense than than $900 on a fmic especially using a tune already making more boost.
Would other people agree with me that when wanting to cool down a turbocharged car, first cooling solution should be methanol? And if those AIT are still to high, then upgrade to a fmic.
__________________
335xi Sedan 6AT | Weather(70-85°F) | N54 Tune Comparison Chart || N54 Turbo Upgrade Comparison Chart
-PROcede Rev. 2.5 ~ v5 (3/17 maps) / JB4 (8/21 maps) / COBB (Stg2+FMIC LT Aggressive maps)
†Procede Map2(UT 45 - IGN 40) Aggression Target 2.0 | 0-60 in 4.0sec || †Cobb E30 LT (35% Ethanol/65% 93 Octane) | 0-60 in 3.9sec
AR Design Catless DP | BMS DCI + OCC | ETS 5 FMIC | Alpina B3 Trans Flash |235/265 19" Michelin PSS
Appreciate 0
      05-07-2010, 09:11 AM   #7
cn555ic
cn555ic's Avatar
United_States
441
Rep
18,331
Posts

Drives: 335i
Join Date: Jun 2007
Location: US

iTrader: (6)

In your case since your leasing I would just do the meth and call it a day. Adding a intercooler will effectively make using meth more efficient since the iats will be lower than with oem. So basically the starting point of the iat will be lower when meth is injected
Appreciate 0
      05-07-2010, 09:13 AM   #8
AltecBX
Colonel
AltecBX's Avatar
United_States
324
Rep
2,663
Posts

Drives: BMW 335xi Sedan; BMW M3 ZCP
Join Date: Nov 2007
Location: NYC

iTrader: (0)

Garage List
2018 BMW M3 ZCP  [0.00]
2007 BMW 335Xi  [0.00]
Understood. But wouldn't doing meth first then FMIC make more sense?
__________________
335xi Sedan 6AT | Weather(70-85°F) | N54 Tune Comparison Chart || N54 Turbo Upgrade Comparison Chart
-PROcede Rev. 2.5 ~ v5 (3/17 maps) / JB4 (8/21 maps) / COBB (Stg2+FMIC LT Aggressive maps)
†Procede Map2(UT 45 - IGN 40) Aggression Target 2.0 | 0-60 in 4.0sec || †Cobb E30 LT (35% Ethanol/65% 93 Octane) | 0-60 in 3.9sec
AR Design Catless DP | BMS DCI + OCC | ETS 5 FMIC | Alpina B3 Trans Flash |235/265 19" Michelin PSS
Appreciate 0
      05-07-2010, 09:23 AM   #9
cn555ic
cn555ic's Avatar
United_States
441
Rep
18,331
Posts

Drives: 335i
Join Date: Jun 2007
Location: US

iTrader: (6)

Like I said in your case yes. Not worth the added efficiency with intercooler since you have to return car back to stock upon the lease ending. Meth will be better for iat drops than intercooler. Meth trumps an intercooler. There are some mods that IMO are not worth the hassle if it's a lease car. Meth and intercooler are both I wouldn't do. On a lease the most I would do is a tune and intake that's it
Appreciate 0
      05-07-2010, 10:13 AM   #10
pander5
Special Forces - Discretion is superior
pander5's Avatar
31
Rep
1,011
Posts

Drives: 335i Coupe Sapphire Black
Join Date: Mar 2006
Location: Tampa, FL

iTrader: (0)

Garage List
2007 335i Coupe  [0.00]
I have strongly considered a meth kit and might eventually go that route. My approach has been to "balance" the platform a bit with each mod. Intake, exhaust, intake etc. I'm now at a point that the car feels perfect motor wise and I want to work on the dynamics of the "racing" platform and add coil overs, sways and brakes. I own, not lease and will keep this car for a few more years.

Just my persepctive and I have been fortunate enough to follow this board for a couple of years now. You guys have offered invaluable perspectives on so many different things with this car I don't think you realize how many out here have benefitted.
__________________
M3 + trailer hitch = oxymoron
Appreciate 0
      05-07-2010, 10:57 AM   #11
Kareem335i
New Member
Kareem335i's Avatar
United_States
2
Rep
16
Posts

Drives: 335i
Join Date: Sep 2008
Location: Yonkers, NY

iTrader: (0)

Quote:
Originally Posted by AltecBX View Post
Understood. But wouldn't doing meth first then FMIC make more sense?
I'm with you on that one.....I did the meth on my 335i and its really worth it but i bought the AEM kit for $400 and it works just as good as the vishnu kit. and now I'm upgrading the turbos so I will need a better FMIC in this case.
__________________
335i Power
Appreciate 0
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 08:43 AM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST