18 or 19 x 11 ET: 45ish, does anybody make this?

Dr. G · 08-01-2012, 11:38 PM

Looking for an 11" wheel with a 45 offset give or take a couple mm's.

Are there any options available for a setup like this?

PSUSMU · 08-02-2012, 08:42 AM

That will probably fit with a 275. It won't be quite flush. 11" et35 is about flush at -2 camber.

remmib · 08-02-2012, 10:22 AM

Do that even clear on the strut side?

VMRWheels · 08-02-2012, 01:23 PM

We have VMR V710's in a 19x11 +25, unfortunately, no +45 offset.

edirtaynine · 08-02-2012, 01:25 PM

Quote:

Originally Posted by remmib

Do that even clear on the strut side?

i dont think it will

PSUSMU · 08-02-2012, 02:45 PM

I'll measure my inside clearance with 11" et32

Dr. G · 08-02-2012, 04:31 PM

There should be between 4-6mm clearance still with a 45 offset according to my calculations.

With an 11 inch wheel with no poke I should be able to run a fairly juicy tire for a once in a while rear setup.

bmw325i · 08-02-2012, 04:48 PM

It actually looks like that will fit. You should be able to run a good sized rear tire maybe a 295.

Dr. G · 08-02-2012, 04:52 PM

Quote:

Originally Posted by bmw325i

It actually looks like that will fit. You should be able to run a good sized rear tire maybe a 295.

Yeah haha, the initial goal was a 305, but at my ride height I don't think that's gonna happen without some more tweaking and I still don't think it would workout too well.
I'm going to look into 18's to see if I can find a 30 sidewall to reduce overall diameter.

I'll be throwing a 295/30/19 on for starters to see how it works out if I can find a wheel with these specs.

After that maybe I'll try a 305 with shaved fenders and lots of bump stops just for the hell of it and then return things back to normal haha.

bmw325i · 08-02-2012, 04:55 PM

You could probably fit a 305 fairly easy as long as it clears the strut.

DriftDreamzSS · 08-02-2012, 08:40 PM

Pretty sure you can order forgestar f14's in custom width/offset. I believe HRE will custom make you whatever you like and Work and SSR have a ton of options on most of their models and should have something very close to that.

bmw325i · 08-02-2012, 09:17 PM

I was actually cleaning my wheels earlier, and noticed that you might have some trouble with the right rear wheel liner. It looks like some parts of it will be really close to the tire.

Dr. G · 08-02-2012, 10:14 PM

Quote:

Originally Posted by bmw325i

You could probably fit a 305 fairly easy as long as it clears the strut.

Quote:

Originally Posted by bmw325i

I was actually cleaning my wheels earlier, and noticed that you might have some trouble with the right rear wheel liner. It looks like some parts of it will be really close to the tire.

Yeah, there's a couple areas that might cause some issues, plus my ride height is pretty low. My fender is tucking a tiny bit of tire, so tire diameter could also be an issue unless I stiffen the rear up a lot and throw in some bumpstops.

Is there room to adjust the liner in the area you're speaking of? I'm gonna lift up the car tmrw and take a look around. Maybe I'll borrow a 295 from someone and just kinda throw it into the wheel well and see how things look in there.

Quote:

Originally Posted by DriftDreamzSS

Pretty sure you can order forgestar f14's in custom width/offset. I believe HRE will custom make you whatever you like and Work and SSR have a ton of options on most of their models and should have something very close to that.

I'll be throwing a set of drag radials onto the wheels and will be using them on occasion only so I'm not feeling an HRE pricetag for a once in a while wheel I'll run on the rear only. I prefer something cheap and maybe even ugly haha.

bmw325i · 08-03-2012, 01:37 AM

The part I was talking about is the wheel liner on the side closest to the rear bumper it looks like the tire might touch it if your that close on the inside. It's only on the passenger side that it looks like it might be an issue. It's hard to tell though since I have 9.5's with a lower offset.

PSUSMU · 08-03-2012, 01:01 PM

Quote:

Originally Posted by DriftDreamzSS

Pretty sure you can order forgestar f14's in custom width/offset. I believe HRE will custom make you whatever you like and Work and SSR have a ton of options on most of their models and should have something very close to that.

There are hundreds more custom wheel manufacturers than those few..

08-01-2012, 11:38 PM	#1
Dr. G Major General 278 Rep 5,062 Posts Drives: Black e92 335i Join Date: Apr 2010 Location: Brampton, Ontario iTrader: (32) Garage List e92 BMW 335i [8.84]	18 or 19 x 11 ET: 45ish, does anybody make this? Looking for an 11" wheel with a 45 offset give or take a couple mm's. Are there any options available for a setup like this? __________________ JB4 / OSS Angel Eyes / Downpipes / F1-Racewerks FMIC / Custom Meth Kit / BMS DCI / ER Chargepipe / HKS BOV / BMS Meth Elbow / BMW Performance Exhaust / Carbon Fiber Inlay Quad Tips / 19" Miro 111 / Front Aero Lip / M3 Sides / VRS CSL Trunk / Mtech Rear / DD CF Quad Finned Diffuser / LCI Tails / BBK / Smoked Reflectors / F1 Euphoria LED Interior / License LED's / GT 5000k Corners / 5000k HID Fogs / Air Scoops / LED Turn Signals / FK Silverline Coilovers / HPA endlinks / Vibrant Resonators / Osram CBI 5000k D1S
	Appreciate 0 Tweet Quote

08-02-2012, 08:42 AM	#2
PSUSMU Captain 95 Rep 985 Posts Drives: 2008 Porsche 911 Carrera S Join Date: Jun 2012 Location: Falls Church/Merrifield, VA iTrader: (3)	That will probably fit with a 275. It won't be quite flush. 11" et35 is about flush at -2 camber.
	Appreciate 0 Quote

08-02-2012, 10:22 AM	#3
remmib General 1566 Rep 29,202 Posts Drives: 2013 F10 520d M-Sport Join Date: Feb 2006 Location: Norway iTrader: (0)	Do that even clear on the strut side? __________________ F10 520d M-Sport Alpine White \| HRE P43SC 20x9+20x11 \| Michelin PSS 255/35+295/30 \| KW V3 Coilover \| M5 Front Sway Bar + M550d Rear Sway Bar \| 3DDesign Front Lip \| BMW M Performance CF Spoiler \| BMW M Performance Diffuser \| BMW M Performance Black Grills \| BMW M Performance Pedals \|
	Appreciate 0 Quote

08-02-2012, 01:23 PM	#4
VMRWheels BimmerPost Supporting Vendor 2038 Rep 25,989 Posts Drives: BMW Join Date: Jun 2007 Location: Anaheim, CA iTrader: (4) Garage List 2013 BMW M3 [10.00] 2015 BMW M4 [0.00] 2013 BMW F30 [0.00] 2014 BMW F22 [0.00] 2013 BMW F06 [0.00]	We have VMR V710's in a 19x11 +25, unfortunately, no +45 offset. __________________ VMR\|Wheels \| 714.442.7916 \| sales@velocitymotoring.com \| www.velocitymotoring.com \| facebook \| flickr \| Instagram Last edited by VMRWheels; 08-03-2012 at 12:29 PM..
	Appreciate 0 Quote

08-02-2012, 02:45 PM	#6
PSUSMU Captain 95 Rep 985 Posts Drives: 2008 Porsche 911 Carrera S Join Date: Jun 2012 Location: Falls Church/Merrifield, VA iTrader: (3)	I'll measure my inside clearance with 11" et32
	Appreciate 0 Quote

08-02-2012, 04:31 PM	#7
Dr. G Major General 278 Rep 5,062 Posts Drives: Black e92 335i Join Date: Apr 2010 Location: Brampton, Ontario iTrader: (32) Garage List e92 BMW 335i [8.84]	There should be between 4-6mm clearance still with a 45 offset according to my calculations. With an 11 inch wheel with no poke I should be able to run a fairly juicy tire for a once in a while rear setup. __________________ JB4 / OSS Angel Eyes / Downpipes / F1-Racewerks FMIC / Custom Meth Kit / BMS DCI / ER Chargepipe / HKS BOV / BMS Meth Elbow / BMW Performance Exhaust / Carbon Fiber Inlay Quad Tips / 19" Miro 111 / Front Aero Lip / M3 Sides / VRS CSL Trunk / Mtech Rear / DD CF Quad Finned Diffuser / LCI Tails / BBK / Smoked Reflectors / F1 Euphoria LED Interior / License LED's / GT 5000k Corners / 5000k HID Fogs / Air Scoops / LED Turn Signals / FK Silverline Coilovers / HPA endlinks / Vibrant Resonators / Osram CBI 5000k D1S
	Appreciate 0 Quote

08-02-2012, 04:48 PM	#8
bmw325i Major General 223 Rep 5,120 Posts Drives: 2006 BMW 325i Join Date: Oct 2010 Location: United States iTrader: (8)	It actually looks like that will fit. You should be able to run a good sized rear tire maybe a 295.
	Appreciate 0 Quote

08-02-2012, 04:55 PM	#10
bmw325i Major General 223 Rep 5,120 Posts Drives: 2006 BMW 325i Join Date: Oct 2010 Location: United States iTrader: (8)	You could probably fit a 305 fairly easy as long as it clears the strut.
	Appreciate 0 Quote

08-02-2012, 08:40 PM	#11
DriftDreamzSS Captain 22 Rep 627 Posts Drives: e92 335i Join Date: Aug 2009 Location: Oxnard, Ca / Lafayette, LA iTrader: (2)	Pretty sure you can order forgestar f14's in custom width/offset. I believe HRE will custom make you whatever you like and Work and SSR have a ton of options on most of their models and should have something very close to that. __________________ _
	Appreciate 0 Quote

08-02-2012, 09:17 PM	#12
bmw325i Major General 223 Rep 5,120 Posts Drives: 2006 BMW 325i Join Date: Oct 2010 Location: United States iTrader: (8)	I was actually cleaning my wheels earlier, and noticed that you might have some trouble with the right rear wheel liner. It looks like some parts of it will be really close to the tire.
	Appreciate 0 Quote

08-03-2012, 01:37 AM	#14
bmw325i Major General 223 Rep 5,120 Posts Drives: 2006 BMW 325i Join Date: Oct 2010 Location: United States iTrader: (8)	The part I was talking about is the wheel liner on the side closest to the rear bumper it looks like the tire might touch it if your that close on the inside. It's only on the passenger side that it looks like it might be an issue. It's hard to tell though since I have 9.5's with a lower offset.
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search