[GewoW]

Originally Posted by kenneth

Indeed, nice seeing you folks! Stay tuned for a lunch meet ....

What pads are those? PFCs?

Maybe a mechanic can fish it for you using a magnetic tool.

Pagid RS29s

What if it stays there forever ??

[Evochuck]

Originally Posted by GewoW

In addition, dropped a small screw driver bit between the airbox and the front headlight on the left side...can't find it. Tried to go fwd and backwd and nothing. Fmlllll

What's the worst that can happen??

In on the underbody panel, nothing to fear there, itll still be there if you ever remove your bumper.

[e92_RealCity514]

Originally Posted by jgalaxy

Depends for what. For general stuff for BMWs - Speed Aurotech on Pierrefonds bld near Jacques Bizard.

Forget that place. Speed autotech are bunch of scammers. Charge extra for nothing and do amazingly stupid work. They charge you the price of brand new material but replace them with used ones its ridiculous. Hasnt happened only to
ME but quite a few people and i only found out 6months after just by curiosity of going to a new indy shop and have them look at my car.

Just tryin give the heads up out there for these guys charging way too many hours of labour for stuff that dont even take as much. For someone whos new, hes in the trap. Just sharing my experience, there are much better friendly and professional places out there other than Speed Autotech

[jgalaxy]

Originally Posted by GewoW

So these were my pads after this weekend!! Fronts were thrown. Rears are kept "in case", but in reality should be thrown.

My rule of thumb. Anything less than double the backing plate thickness should be a sign to get new pads.

[jgalaxy]

Originally Posted by GewoW

In addition, dropped a small screw driver bit between the airbox and the front headlight on the left side...can't find it. Tried to go fwd and backwd and nothing. Fmlllll

What's the worst that can happen??

Not in the airbox, or any way to get in the airbox, right? It will work it's way lose and fall away.

[jgalaxy]

Originally Posted by e92_RealCity514

Forget that place. Speed autotech are bunch of scammers. Charge extra for nothing and do amazingly stupid work. They charge you the price of brand new material but replace them with used ones its ridiculous. Hasnt happened only to
ME but quite a few people and i only found out 6months after just by curiosity of going to a new indy shop and have them look at my car.

Just tryin give the heads up out there for these guys charging way too many hours of labour for stuff that dont even take as much. For someone whos new, hes in the trap. Just sharing my experience, there are much better friendly and professional places out there other than Speed Autotech

Sorry to hear about that. I've never had any issues. But I never had any serious work done.

[Beemw335]

For anyone interested, selling my Rev 2.5 Vishnu PROcede v5, please pm me.

[v1nc86]

I've ordered a set of BMS 10mm wheel spacers for my 2008 E90 BMW 335i. However, I made a mistake and I bought wheel spacers for F-series instead of E-series. They are NEW, except a little scratch on one because I've tried to mount them until I noticed they were for F-series.
I bought them from N54Tuning US $99 + TPS 5% + shipping = CAD $136,21. Best offer accepted.
I'm located in Brossard (QC).

--------------------

J'ai commandé 1 set de BMS 10mm wheel spacers pour ma e90 335xi 2008. J'ai fait une erreur dans ma commande, et j'ai commandé des wheel spacers pour F-series et non pour E-series. Ils sont neufs, sauf une légère scratch sur un, car j'ai essayé de l'installer avant de me rendre compte que c'était des wheel spacers pour séries F.
Je les ai acheté de N54Tuning à US $99 + TPS 5% + shipping = CAD $136,21. Toute offre raisonnable acceptée.
J'habite à Brossard (QC).

--------------------

F-Chasis Wheel Spacers fit these BMW models:
1 Series F20 2012-2013 (M14x 1.25)
3 Series Sedan F30, F31 2012-2013 (M14x 1.25)
5 Series F10, M5 2011-2013 (M14x 1.25)
6 Series 2012-2013 F12, F13 (M14x 1.25)
7 Series 2009+ F01, F02 (M14x 1.25)

--------------------

Achetés ici / Bought here: http://www.n54tuning.com/index.php?_...&productId=129

[GewoW]

Originally Posted by jgalaxy

Not in the airbox, or any way to get in the airbox, right? It will work it's way lose and fall away.

nononono box was closed. new AFE filter inside

[jezzy]

Originally Posted by jgalaxy

Depends for what. For general stuff for BMWs - Speed Aurotech on Pierrefonds bld near Jacques Bizard.

Thanks. Ive got a horrible squeeky suspension. . Needs help!

[jezzy]

Originally Posted by e92_RealCity514

Forget that place. Speed autotech are bunch of scammers. Charge extra for nothing and do amazingly stupid work. They charge you the price of brand new material but replace them with used ones its ridiculous. Hasnt happened only to
ME but quite a few people and i only found out 6months after just by curiosity of going to a new indy shop and have them look at my car.

Just tryin give the heads up out there for these guys charging way too many hours of labour for stuff that dont even take as much. For someone whos new, hes in the trap. Just sharing my experience, there are much better friendly and professional places out there other than Speed Autotech

Thanks for feedback. Any other recommendations?

[jezzy]

Anyone in the west island do coding work? Got a cic retro coming my way.. going to need someones coaching

[GewoW]

So went to BMW and they changed the sensor that caused the CEL. Also, they fished out my screw bit!!

[GewoW]

In addition, went to Perry Auto to pick up to PFC01s and met up with Carl. Spoke to him about the seat that I wanted in the past and told him that it was just an unsafe decision because of the lack of cage/hans/etc. He disagreed because he mentioned you can still use the 3 point (false, because it needs to be above the seat and doesn't wrap your hips) and he also mentioned that it's "proven" that racing seats are safer on track.

I dislike how he is providing false information that is potentially unsafe.

My 2 cents.

[jgalaxy]

Originally Posted by GewoW

In addition, went to Perry Auto to pick up to PFC01s and met up with Carl. Spoke to him about the seat that I wanted in the past and told him that it was just an unsafe decision because of the lack of cage/hans/etc. He disagreed because he mentioned you can still use the 3 point (false, because it needs to be above the seat and doesn't wrap your hips) and he also mentioned that it's "proven" that racing seats are safer on track.

I dislike how he is providing false information that is potentially unsafe.

My 2 cents.

Thats pretty bizarre. Sparco have a few nice sport seats that I was considering when I had my 335. You should have a look at the Torino, Chrono and others.

[GewoW]

I was referring to a seat with fixed back of course. In terms of sports seat, i'll just deal with the CG lock!

[Pseudo Nim]

Originally Posted by GewoW

I was referring to a seat with fixed back of course. In terms of sports seat, i'll just deal with the CG lock!

My CG lock broke after like a year.

[kenneth]

Originally Posted by GewoW

So went to BMW and they changed the sensor that caused the CEL. Also, they fished out my screw bit!!

Good for you! Hopefully no more CELs on track. Did they fish it with magnet?

Originally Posted by GewoW

In addition, went to Perry Auto to pick up to PFC01s and met up with Carl. Spoke to him about the seat that I wanted in the past and told him that it was just an unsafe decision because of the lack of cage/hans/etc. He disagreed because he mentioned you can still use the 3 point (false, because it needs to be above the seat and doesn't wrap your hips) and he also mentioned that it's "proven" that racing seats are safer on track.

I dislike how he is providing false information that is potentially unsafe.

My 2 cents.

Yah! doesn't sound kosher. It's a matter of life and death.

[GewoW]

Originally Posted by Pseudo Nim

My CG lock broke after like a year.

U too fat

[bignico_05]

Where's a good place to install performance parts in the west island?

[Evochuck]

Originally Posted by bignico_05

Where's a good place to install performance parts in the west island?

Depends what...I might be able to help you depending on the parts.

[steve_eclipse]

Originally Posted by bignico_05

Where's a good place to install performance parts in the west island?

You can try AutoElite on Sources Blvd.....near that Shriners place, between Brunswick and De Salaberry

3354 BOULEVARD DES SOURCES, DOLLARD-DES-ORMEAUX, QC, CANADA
514.822.4449

Ask for Phil to work on your car.....he knows turbos.