[andrzeju]

I cannot read from the NFRM module but have no problems reading/writing to 2JBBF, CAS, or CIC.
I'm using NCSexpert 4.0.1, EDIBAS 7.3.0, INPA 5.0.6, and the v50.2 spDaten update now. The car is a 2012 E82 135i.

Any suggestions?

[cryptomit]

Update your daten to v55.

What error it gives you?

[andrzeju]

Originally Posted by cryptomit

Update your daten to v55.

What error it gives you?

COAPI-2041: wrong ecu coding index

Cannot find v55 daten anywhere. Can you PM the link if you know?

[Ossocao]

Sorry about this here, but mini R60 is a lot like BMWs E series coding.

Does anyone know if it is possible to code the climate control to remember re circulation on?

[Ossocao]

Originally Posted by LMB335IS

I use this one a lot

This was not on the sheet. How did you code it?

[LMB335IS]

Originally Posted by Ossocao

This was not on the sheet. How did you code it?

I was talking about the coding sheet, I use it a lot for E9xx coding. Try coding MSA_MEMORY to aktiv in your IHK module. It's supposed to keep the same settings when you start your car that were on when you turned it off

[_Ryan_]

Originally Posted by xxxjecxxx

I would program the module in expert mode to reset it to it's factory values. Takes the guess work out of it.

No luck. Any other ideas?

[LangJai]

Hey guys, I'm encountering this problem in NCSExpert.

When connected to INPA, the two black dots do appear so I assume the connection is fine?

Thanks for the help!

[teapea]

Yes, very helpful. Thanks.

[NotQuickEnough]

Originally Posted by dmurray14

Notepad doesn't do anything and the SMS feature won't be of much use unless you have one of the few older phones that support SMS over bluetooth.

I just got it working on my 2009. This is not a feature of old phones, this is a feature of new phones which support Bluetooth MAP profile. IPhone 4+ supports MAP. I have a Nokia Lumina 830 (2014)

[s3000]

thank you

[VarCity_E92]

hey all, i went through a couple pages of the forum. Posts were from 2010. Obviously technology has changed a bit. Can someone please provide a cable that was successful for them that is recent, the links i saw were ODBII to serial. I'm sure there are some with USB. I seen some cheaper ODBII to USB but i heard that the cheaper China ones are hit and miss. From your experience and success please provide a good cable. preferably not 100+ dollars.

Thank you!

[mojobmw_e90]

is this what people are using for coding injectors

[xxxjecxxx]

Originally Posted by VarCity_E92

hey all, i went through a couple pages of the forum. Posts were from 2010. Obviously technology has changed a bit. Can someone please provide a cable that was successful for them that is recent, the links i saw were ODBII to serial. I'm sure there are some with USB. I seen some cheaper ODBII to USB but i heard that the cheaper China ones are hit and miss. From your experience and success please provide a good cable. preferably not 100+ dollars.

Thank you!

First post has link for the cable you need. It's the only one I recommend. Before making this tutorial I purchased 10 different cheap cables and opened a few of them. The chips inside the cheaper cables are clones and much smaller in size.

soo... Buy the cable on the first post

[dirtye84]

does anybody have the latest version of NCS expert available for download?

[VarCity_E92]

Originally Posted by xxxjecxxx

First post has link for the cable you need. It's the only one I recommend. Before making this tutorial I purchased 10 different cheap cables and opened a few of them. The chips inside the cheaper cables are clones and much smaller in size.

soo... Buy the cable on the first post

Hey Jec, so the cable you posted is a serial cable. is it a male or female connector. gotta see how it will fit on my laptop.

[wildcatcrazy]

Originally Posted by VarCity_E92

Hey Jec, so the cable you posted is a serial cable. is it a male or female connector. gotta see how it will fit on my laptop.

That cable from 1 stop is a USB cable, and comes with an OBD adapter that bridges pin 7/8 for older model cars (E46).

[VarCity_E92]

Originally Posted by wildcatcrazy

That cable from 1 stop is a USB cable, and comes with an OBD adapter that bridges pin 7/8 for older model cars (E46).

Ahh yeah, the 100 dollar one ... yeah might just have to go with that one. Spend the extra money for reassurance to know it works instead of a cheaper one that may or may not work! thanks

[xxxjecxxx]

Originally Posted by dirtye84

does anybody have the latest version of NCS expert available for download?

Link is on first post.

[Awesomeheimer]

Anyone coding, or know someone who does, in the cental NJ (Red Bank) area?

[wilkr1]

Hey Guys..

I am having trouble connecting to the car. I have the cable, i installed the software..by replacing all the folders with the ones in the V49 rar. ..I open up INPA but i never get the solid black dots. Do i have to change COM port, and COM settings? I got tired of searching thru the 250+ pages, i have been looking.
Car is 2011 M3..


Any help will be appreciated

[wildcatcrazy]

Originally Posted by wilkr1

Hey Guys..

I am having trouble connecting to the car. I have the cable, i installed the software..by replacing all the folders with the ones in the V49 rar. ..I open up INPA but i never get the solid black dots. Do i have to change COM port, and COM settings? I got tired of searching thru the 250+ pages, i have been looking.
Car is 2011 M3..


Any help will be appreciated

Com port and latency should be set to 1.