|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
N54 JB4 4-2 menu Error codes.
|
|
06-02-2014, 06:36 AM | #1 |
New Member
0
Rep 23
Posts |
N54 JB4 4-2 menu Error codes.
I am FBO (w/o Meth) and i have some boost oscillation around 2k-3k RPM.
So i tried the 4-2 in dash menu for JB4 (G5 iso board), and lowered menu 12 in dash by about 6-9 clicks. After a short drive of running errands i get the half engine light. PLugged in the BT and got these codes. I have no idea what is going on. So I set the setting back to normal.... ENGINE: 0D0E Error will not cause a warning light Error is not currently present Test conditions have been completed Signal or value below threshold Short circuit or signal interruption 1112 Error will cause a warning light Error is not currently present Test conditions have been completed Signal or value below threshold 1212 Error will not cause a warning light Error is not currently present Test conditions have been completed Short circuit or signal interruption 8009 Error will cause a warning light Error is not currently present Test conditions have not been completed Signal or value below threshold 7404 Error will not cause a warning light Error is not currently present Test conditions have been completed 0400 Error will not cause a warning light Error is not currently present Test conditions have been completed 00E2 Error will not cause a warning light Error is currently present Test conditions have not been completed Short circuit or signal interruption 8212 Error will not cause a warning light Error is not currently present Test conditions have not been completed Signal or value below threshold 21F0 Error will cause a warning light Error is not currently present Test conditions have not been completed Timeout Signal or value below threshold Short circuit or signal interruption 9BF1 Error will not cause a warning light Error is not currently present Test conditions have not been completed Signal or value below threshold 61F0 Error will not cause a warning light Error is currently present Test conditions have been completed Timeout Short circuit or signal interruption 5BC9 Error will not cause a warning light Error is not currently present Test conditions have been completed Timeout 5200 Error will not cause a warning light Error is not currently present Test conditions have been completed 528E Error will not cause a warning light Error is not currently present Test conditions have been completed 8080 Error will not cause a warning light Error is not currently present Test conditions have been completed Short circuit or signal interruption 9274 Error will not cause a warning light Error is not currently present Test conditions have been completed Timeout 0004 Error will not cause a warning light Error is not currently present Test conditions have been completed 5100 Error will not cause a warning light Error is not currently present Test conditions have been completed F882 Error will not cause a warning light Error is not currently present Test conditions have not been completed Signal or value below threshold 1221 Error will cause a warning light Error is currently present Test conditions have not been completed B79B Error will cause a warning light Error is currently present Test conditions have not been completed Short circuit or signal interruption 1261 Error will cause a warning light Error is currently present Test conditions have not been completed 655B Error will cause a warning light Error is currently present Test conditions have been completed Short circuit or signal interruption 0452 Error will not cause a warning light Error is not currently present Test conditions have been completed 0052 Error will cause a warning light Error is not currently present Test conditions have been completed Timeout Signal or value below threshold 0080 Error will cause a warning light Error is not currently present Test conditions have been completed 0992 Error will not cause a warning light Error is currently present Test conditions have not been completed Timeout 0400 Error will not cause a warning light Error is not currently present Test conditions have been completed Timeout E251 Error will not cause a warning light Error is not currently present Test conditions have been completed 00F8 Error will cause a warning light Error is not currently present Test conditions have been completed Signal or value below threshold 1212 Error will not cause a warning light Error is not currently present Test conditions have been completed Short circuit or signal interruption F0B7 Error will cause a warning light Error is not currently present Test conditions have not been completed Signal or value below threshold Short circuit or signal interruption F112 Error will not cause a warning light Error is currently present Test conditions have been completed Short circuit or signal interruption F065 Error will not cause a warning light Error is currently present Test conditions have not been completed Signal or value below threshold Short circuit or signal interruption C904 Error will not cause a warning light Error is currently present Test conditions have not been completed Signal or value below threshold 8E00 Error will cause a warning light Error is not currently present Test conditions have been completed 8009 Error will cause a warning light Error is not currently present Test conditions have not been completed Signal or value below threshold 7404 Error will not cause a warning light Error is not currently present Test conditions have been completed 0400 Error will not cause a warning light Error is not currently present Test conditions have been completed 00E2 Error will not cause a warning light Error is currently present Test conditions have not been completed Short circuit or signal interruption 8212 Error will not cause a warning light Error is not currently present Test conditions have not been completed Signal or value below threshold 21F0 Error will cause a warning light Error is not currently present Test conditions have not been completed Timeout Signal or value below threshold Short circuit or signal interruption 9BF1 Error will not cause a warning light Error is not currently present Test conditions have not been completed Signal or value below threshold 61F0 Error will not cause a warning light Error is currently present Test conditions have been completed Timeout Short circuit or signal interruption 5BC9 Error will not cause a warning light Error is not currently present Test conditions have been completed Timeout 5200 Error will not cause a warning light Error is not currently present Test conditions have been completed 528E Error will not cause a warning light Error is not currently present Test conditions have been completed 8080 Error will not cause a warning light Error is not currently present Test conditions have been completed Short circuit or signal interruption 9274 Error will not cause a warning light Error is not currently present Test conditions have been completed Timeout 0004 Error will not cause a warning light Error is not currently present Test conditions have been completed 5100 Error will not cause a warning light Error is not currently present Test conditions have been completed F882 Error will not cause a warning light Error is not currently present Test conditions have not been completed Signal or value below threshold 1221 Error will cause a warning light Error is currently present Test conditions have not been completed B79B Error will cause a warning light Error is currently present Test conditions have not been completed Short circuit or signal interruption 1261 Error will cause a warning light Error is currently present Test conditions have not been completed 655B Error will cause a warning light Error is currently present Test conditions have been completed Short circuit or signal interruption 0452 Error will not cause a warning light Error is not currently present Test conditions have been completed 0052 Error will cause a warning light Error is not currently present Test conditions have been completed Timeout Signal or value below threshold 0080 Error will cause a warning light Error is not currently present Test conditions have been completed 0992 Error will not cause a warning light Error is currently present Test conditions have not been completed Timeout 0400 Error will not cause a warning light Error is not currently present Test conditions have been completed Timeout E251 Error will not cause a warning light Error is not currently present Test conditions have been completed 00F8 Error will cause a warning light Error is not currently present Test conditions have been completed Signal or value below threshold 1212 Error will not cause a warning light Error is not currently present Test conditions have been completed Short circuit or signal interruption F0B7 Unkown fault code, please tell us about this missing information by clicking here |
06-03-2014, 09:22 AM | #4 |
New Member
0
Rep 23
Posts |
Yes.
I did. I cleared the codes. And adjusted the menu 12 back to normal. I havent got an in dash light yet. So here is to hoping it was just a fluke. |
Appreciate
0
|
Bookmarks |
|
|