[jasonn]

This just some organization for myself...please disregard

1. Download Daten Files

Originally Posted by BLooD30 VIA BimmerForums.com

ISTA/p v40 download links.

http://forums.bimmerforums.com/forum....php?t=1590923

password from_chang2

:redspot

Originally Posted by dadeppa VIA **************

E89 v41 datenfiles:
Download via rapidshare.com PW: bmwrulez

Would have uploaded this buckload on usenet, but don't know how... just leeching there

Originally Posted by duckdonald VIA **************

YESSSS...
download the files needed to encode:
ftp://beemer.kicks-ass.org/--UPLOAD--/E89_Daten_V42.rar

Or the 'whole package:
http://www.**************/showthread...ull=1#post8341

2. Update Daten Files

Originally Posted by rondo VIA BimmerForums.com

Hi

In each “sp-daten-Exx” folder in the subfolder “daten” find a file “laden.bat” … execute this .bat file and your ncs will be updated automatically with the new data for the corresponding model.

Or u can do the following copy-paste procedure:

Target ---------------------------Source .(SP-Daten-Exx directory from ISTA-P)

\NCSEXPER\SGDAT\ -------- .ipo files
\NCSEXPER\DATEN\ -------- coding data (daten) for models
\EDIABAS\Ecu\ -------------- .prg files......

3. Add to Vehicle Order

Originally Posted by ViperRunner VIA BimmerRetrofit.com

...

Yes, you can code your CIC with the NCS Expert, but to see the CIC unit on the NCS Expert, you will need to add one more retrofit code besides the $609, the $6VA is the second retrofit code you should add to your VO.

...

Originally Posted by Technic

You need to change your FA production date so NCS Expert can pick up the proper CIC DATEN files. Of course, the assumption is that you do have the proper 2009+ DATEN files.

Try #0908 (MY2009) or #0909 (MY2010) as your production date. If you are doing a Combox retrofit you must use #0910 and the MY2011.5 (09/10) DATEN files.

4. Code to Vehicle - FA_Write

Originally Posted by Steveo

Ive established that 2 modules need to be coded, the CAS, which is the other one?

Originally Posted by ******

NFRM or FRM depending on your MY

[aaabbbyyy]

jasonn is a Man!
useful thread!
I have to add #0909 and $6VA to FA? right?

[Sunwar]

Hi Jason...


Would you know what variables in the CIC module needs to be tweaked so that I can "see" ConnectedDrive on my BMW X5/E70 MY12, please?

[gazosnic]

Jason - do you have a current link to the full package? None of the software I seem to dl work togeather. INSA, has various scripts missing for e89/90. NCSEXPERT only works for inidividial moduals etc. Would like to find a complete working package for the e9x ready to go if it exsists.

[Jorjel]

If your car is LCI, no need to change the date.
Here is my procedure:
Added $609 and $6VA to FA and performed fa_write to CAS and NFRM.
Then I have performed a sg_codierung to CIC (here is where the sound started to work).
Last step was to perform a sg_codierung to KOMBI (here is where trip conputer started to work). For coding KOMBI, EDIABAS needs to be at 7.2 version (I have used v49 daten).
I still need to figure how I can have the climate controls on screen...
I will try to make an archive of my files.

[iwantaw335]

Originally Posted by Jorjel

If your car is LCI, no need to change the date.
Here is my procedure:
Added $609 and $6VA to FA and performed fa_write to CAS and NFRM.
Then I have performed a sg_codierung to CIC (here is where the sound started to work).
Last step was to perform a sg_codierung to KOMBI (here is where trip conputer started to work). For coding KOMBI, EDIABAS needs to be at 7.2 version (I have used v49 daten).
I still need to figure how I can have the climate controls on screen...
I will try to make an archive of my files.

Hi, i follow your steps up to writing fa to CAS and NFRM but what do you mean you performed sg_codierung to cic?how can i do that?

[terminator2k2]

Originally Posted by iwantaw335

Hi, i follow your steps up to writing fa to CAS and NFRM but what do you mean you performed sg_codierung to cic?how can i do that?

just means code your cic to your FA. I call it expert mode code module....

file,

load profile,

choose expert mode,

F1 Then F3 , select chassis E89 for E90 , then cas to read FA , then when that's finished click back(F6)

then click process ECU , Select cic , press ok ,

then you should see cic with sg_codierung underneath it....

then click execute job, it will say coding active, then coding ended

close down ncs expert, you have just coded the cic for your vehicle order....

do the same for any module you want to code to your vehicles stock settings...

[iwantaw335]

Thanks.

[MSport_Jon]

Help, trying to write to CAS or read from it and it tells me that the VIN is faulty....! how can i get around this error..?