[mrbeats]

I need to remove my bumper on my m sport e90 pre lci so I
Can fit some lci headlights.I've found the guide for the e92 but
Not the e90.
Is it the same,if so is it easy,im not the best at these things..

Thanks

[makkan00]

Originally Posted by mrbeats

I need to remove my bumper on my m sport e90 pre lci so I
Can fit some lci headlights.I've found the guide for the e92 but
Not the e90.
Is it the same,if so is it easy,im not the best at these things..

Thanks

Its same. Take it to body shop and get it done.

[mrbeats]

Originally Posted by makkan00

Its same. Take it to body shop and get it done.

My local bmw specialist said they will fit them for £80 cash job.

[Rich330D]

Depends on how confident you are? I removed mine a few weeks ago to fit Westfalia towbar for my bike trailer.
2 bolts to remove the plastic lip going into the boot these are covered by blanking plates located just below the tail lights can't miss them.
3 bolts in the wheel arch pull back wheel arch liner and there is another bolt a bit further up, same on both sides then 9 bolts along the bottom.
Pull the bottom of the bumper on the wheel arch to release the side brackets
Get a plastic tool in the shape of a small flat headed screw driver which I believe you can by for doing this job as there are a few clips along the top of the bumper where it meets the body. Get a tourch and as you pull the bumper toward you you'll be able to seem them use the plastic tool to push the clips down and the bumper will come away, I think there are about 4-5 each side and that's it's the bumper will come away
Easy lol

[Sensible_]

Originally Posted by Rich330D

Depends on how confident you are? I removed mine a few weeks ago to fit Westfalia towbar for my bike trailer.
2 bolts to remove the plastic lip going into the boot these are covered by blanking plates located just below the tail lights can't miss them.
3 bolts in the wheel arch pull back wheel arch liner and there is another bolt a bit further up, same on both sides then 9 bolts along the bottom.
Pull the bottom of the bumper on the wheel arch to release the side brackets
Get a plastic tool in the shape of a small flat headed screw driver which I believe you can by for doing this job as there are a few clips along the top of the bumper where it meets the body. Get a tourch and as you pull the bumper toward you you'll be able to seem them use the plastic tool to push the clips down and the bumper will come away, I think there are about 4-5 each side and that's it's the bumper will come away
Easy lol

Front bumper?

The instructions are on DIS I think. Maybe even ISID. I found it fiddly lol

[Rich330D]

Originally Posted by Sensible_

Front bumper?

The instructions are on DIS I think. Maybe even ISID. I found it fiddly lol

DOH!!

Note to self take time to read the post fully before posting away idiot!!

So erm..... Yeah front bumper erm.....

[mrbeats]

Do you think 80 to fit the lights is a fair price ?