[Everfly]

Never mind, found E85 station about 30 minutes away, gonna get it after lunch haha
Edit again NO E85 for me

[benzy89]

Originally Posted by Everfly

I need more information please

Your welcome
http://www.e90post.com/forums/showthread.php?t=712323

Scroll through, on the bottom of Pg 1 + somewhere on Pg 2 people shared links for different Ethanol Vendors. If you decide to order, please let me know. I live in NJ right now, but will be moving at the end of the month + am worried if I'll have access to 93 (E85/E100 obviously would be a quality replacement fuel).

[Everfly]

Originally Posted by benzy89

Your welcome
http://www.e90post.com/forums/showthread.php?t=712323

Scroll through, on the bottom of Pg 1 + somewhere on Pg 2 people shared links for different Ethanol Vendors. If you decide to order, please let me know. I live in NJ right now, but will be moving at the end of the month + am worried if I'll have access to 93 (E85/E100 obviously would be a quality replacement fuel).

Just found one station about 30 minutes away also just order the flex fuel wire and look like not in stock. I am gonna play with 20% mix and see how it turn out gonna run the evo X FBO this Sunday

[benzy89]

Originally Posted by Everfly

gonna run the evo X FBO this Sunday

Better rep BMW and give that Rice Rocket a new a-hole

Make sure to give your car a chance to adapt to the E85 before you meet up with the Evo + bring a camera. Otherwise GL

[Everfly]

Originally Posted by benzy89

Better rep BMW and give that Rice Rocket a new a-hole

Make sure to give your car a chance to adapt to the E85 before you meet up with the Evo + bring a camera. Otherwise GL

Sure will. The Evo guy came to my store ask me to run him, so I am sure I will do my best to show him what our car can do. I look at his car and still stock turbo. He saying his car should run high 11' which I doubt it though. I don't have go-pro and still haven't figure out how to mount the camera yet

[TreDirtyFive]

There are several EVO IV MRs around here running full 100% E85 Tune setups with mild modifications doing way over 400whp...and they look stock. I always see the same guy at my fuel station and he claims to have had the e85 tune for over a year with absolutely no issues. Who knows...give him a run.

[eddi3B.]

Originally Posted by dannyboy6969

under upgrades its there

cant find the wires. can somebody post the link. thanks

[Everfly]

Originally Posted by eddi3B.

cant find the wires. can somebody post the link. thanks

http://www.burgertuning.com/JB3_upgrades.html
Just bought one and found out no E85 gas station around.

[benzy89]

Originally Posted by TreDirtyFive

There are several EVO IV MRs around here running full 100% E85 Tune setups with mild modifications doing way over 400whp...and they look stock. I always see the same guy at my fuel station and he claims to have had the e85 tune for over a year with absolutely no issues. Who knows...give him a run.

EVOs/JDM cars are a little less expensive to fix & I don't have a problem running E85, but I wouldn't want that shit sitting in the fuel system in case it eats through the piping. We already have enough problems with the HPFP while running legit gas, not trying to make more headaches for myself in the pursuit of HP

[TreDirtyFive]

Originally Posted by benzy89

EVOs/JDM cars are a little less expensive to fix & I don't have a problem running E85, but I wouldn't want that shit sitting in the fuel system in case it eats through the piping. We already have enough problems with the HPFP while running legit gas, not trying to make more headaches for myself in the pursuit of HP

My response was to "Everfly" who wants to run his car against one...a warning to how quick some of those things can be...

[wanlong]

My car only has jb4 and charge pipe but no downpipe. I tried new map5 today with 94 pump gas in Canada, the boost during WOT pull stays 15psi according to my fuel gauge. Way better than map1 i was running.

My question is can I run this map5 without a dp and mix e85? And I am going to install my bms dp in a few days, after I install the dp, without mix e85, how much boost I can reach?

[eyim1988]

Originally Posted by wanlong

My car only has jb4 and charge pipe but no downpipe. I tried new map5 today with 94 pump gas in Canada, the boost during WOT pull stays 15psi according to my fuel gauge. Way better than map1 i was running.

My question is can I run this map5 without a dp and mix e85? And I am going to install my bms dp in a few days, after I install the dp, without mix e85, how much boost I can reach?

you should get a dp or you will be putting a lot of stress on your turbo with higher boost levels..

[wanlong]

Originally Posted by eyim1988

you should get a dp or you will be putting a lot of stress on your turbo with higher boost levels..

yes I am going to put on dp this weekend, but I still have 2 cats on midpipe since I have an xi In this case is map5 still good for me? or I should just stick with map2?

[Sam335ix]

Originally Posted by wanlong

yes I am going to put on dp this weekend, but I still have 2 cats on midpipe since I have an xi In this case is map5 still good for me? or I should just stick with map2?

map5 is fine iwth your set up once you put DP's on.

[eyim1988]

Originally Posted by Sam335ix

map5 is fine iwth your set up once you put DP's on.

+1.. Sucks how n54 people dyno 400+ with e85/ no meth, and all the n55 could do was 370 with a butt load of torque. Maybe 380 if i had a fmic.. Still i see n54's e85 + dci only dynoing like 415 whp. I'm seriously done modding this car. I love my car but having friends who own cars like the isf, e92 m3, 335is, gtr,......

[Black Gold]

Originally Posted by eyim1988

+1.. Sucks how n54 people dyno 400+ with e85/ no meth, and all the n55 could do was 370 with a butt load of torque. Maybe 380 if i had a fmic.. Still i see n54's e85 + dci only dynoing like 415 whp. I'm seriously done modding this car. I love my car but having friends who own cars like the isf, e92 m3, 335is, gtr,......

Your car with those mods is faster than an m3 or isf.

And is 30whp less with over 400wtq really that slow?

The tunes for this car will continue to be refined and make more power over time.

There is always something faster....

[eyim1988]

Originally Posted by KennyPowers

Your car with those mods is faster than an m3 or isf.

And is 30whp less with over 400wtq really that slow?

The tunes for this car will continue to be refined and make more power over time.

There is always something faster....

That is the absolute limit of our turbos..
It doesnt flow as much as much the stock twins in the n54.. Even with a fmic and meth I can gaurantee you i will only be around ~390.. We will always be 50 whp or so less than the n54 with similar mods.

I know i can beat a stock m3 and is-f in a straight line but the driving feel will never be even close to an m3..

[eddi3B.]

Originally Posted by eyim1988

+1.. Sucks how n54 people dyno 400+ with e85/ no meth, and all the n55 could do was 370 with a butt load of torque. Maybe 380 if i had a fmic.. Still i see n54's e85 + dci only dynoing like 415 whp. I'm seriously done modding this car. I love my car but having friends who own cars like the isf, e92 m3, 335is, gtr,......

eyim. your dyno results were really impressive. howd u manage to put all that power down. i dynoed a few weeks ago on a dyno dynamics sae corrected at 327WHP nd 358wtq. at the time i had my jb4 map 2 w/ ar catless running on 93oct. just threw on the ER cp, CDV and uploaded 7/1 running 30/70 mix e85/93oct and i still dont think i can put down those numbers. was it kalud that helped u with the custom tuning or just the dyno u ran on? nd btw is-f, m3 stock have no chance. i rip them all day

[eyim1988]

Originally Posted by eddi3B.

eyim. your dyno results were really impressive. howd u manage to put all that power down. i dynoed a few weeks ago on a dyno dynamics sae corrected at 327WHP nd 358wtq. at the time i had my jb4 map 2 w/ ar catless running on 93oct. just threw on the ER cp, CDV and uploaded 7/1 running 30/70 mix e85/93oct and i still dont think i can put down those numbers. was it kalud that helped u with the custom tuning or just the dyno u ran on? nd btw is-f, m3 stock have no chance. i rip them all day

I rip them all day too . except i would still rather drive a m3 haha.. Is you car a mt or at? Yes Kalud has helped me a lot.. Your e85 with the 7/1 firmware will def get you to where i am or even more.. I have an at too so that is robbing some power too.. You dynod on a dyno dyamics and they typically read lower than dynojets.,. I'm guessing you are anywhere from 345-360 whp on a dyno jet. With the new firmware and e85 you will be anywhere from 365-380 whp and a lot of torque. past 16 psi you wont seemuch hp increase only torque lol.. Our tiny snails...

[Everfly]

Originally Posted by KennyPowers

The tunes for this car will continue to be refined and make more power over time.

We probably never gonna make over 400 rwhp on stock turbo. Beside with DCT Burger tuning already seen slipping with 5xx torque and of course our motor is not forged so I think we are done unless you will crack the motor open and replace with N54 components or aftermarket. Eventhough N55 is not dyno queen but with 390 rwhp and over 500 torque is fun to drive.

[335 oClock]

Originally Posted by Mike@N54Tuning.com

7/1 map 5 is a BETA autotuning map, suitable for all fuels ranging from 91 octane to race gas mixes including E85 mixes of up to 20%. For E85 mixes over 20% you need the flex fuel wires that will be available soon on their site.

Mike

is it safe to run e85 mix in the long run? even with the flex fuel wires... runnin a 20/80 with e85 comes out to roughly 93.8 octane if I have not made a mistake in calculations

[xnfsx]

I only have an intake and jb4 stage 2. Can I run map 5? or my only choice is map 1 unless I decide to get a dp, cp, fmic, so i can run map 2. and meth for map 3. Is meth safe for long run?