m359 staggered

dghits26 · 10-07-2012, 05:18 PM

Im about to put theses on my 328 xi and wanted to know that theses were the correct tire size

19" 8.5 ET 35 front and 19" 9.5 ET 35 rears with 235/35/19 front rubber and 265/30/19 rear?

Or should I go non staggered..If i go non staggered with wider tires and spacers with that put the same wear on the crank case?

I saw someone had trouble with hearing a clunking sound...

Chrisred · 10-07-2012, 05:44 PM

Ya go square or keep the oem 19" sizes. 225/255. Research the offsets.
Rolling diameter is good with those sizes.

Thank god my tires are finishes (same as u wanted). Got sick of that clunk....

dghits26 · 10-07-2012, 05:49 PM

You heard the clunk sound with this set up 19" 8.5 ET 35 front and 19" 9.5 ET 35 rears with 235/35/19 front rubber and 265/30/19 rear. I heard that was the recommended staggered size.

I don't know what you mean keep the oem 19s .

I have the sport 335 sport rims on now which are staggered , and have not had any issues.

Quote:

Originally Posted by Chrisred

Ya go square or keep the oem 19" sizes. 225/255. Research the offsets.
Rolling diameter is good with those sizes.

Thank god my tires are finishes (same as u wanted). Got sick of that clunk....

dghits26 · 10-07-2012, 06:07 PM

If i go non staggered with wider tires and spacers with that put the same wear on the crank case?

Chrisred · 10-09-2012, 11:43 AM

OEM 19's from dealer are 225/35/19 & 255/30/19

Plug in that on tire section calculator and u will see that rolling diameter difference is way below your 235/265 setup. Therefore it's good for your xi

So either go with oem size or square

e9xslow · 10-10-2012, 08:58 PM

dont go staggered, could fuck up differential and will wear unevenly.

Patrick303 · 10-11-2012, 10:36 AM

Quote:

Originally Posted by rtkach18

dont go staggered, could fuck up differential and will wear unevenly.

Don't listen to noobs. Our cars come optioned from the factory with staggered wheels, so this will not adversary affect your car if you keep the same rolling diameter.

klov335 · 10-11-2012, 04:27 PM

Quote:

Originally Posted by rtkach18

dont go staggered, could fuck up differential and will wear unevenly.

Gtfo nub

rje · 10-12-2012, 03:19 PM

Go staggered. I have this set up with M359 and Conti Extreme Conti. 19x9.5 35ET, 19x10 38ET, 235/35/19 front and 265/30/19. If you are not that lowered, like mine (I have KW V1s) because of snow, I would use 275 instead of 265. It looks like I could use a 15mm spacer on the rear.

dghits26 · 10-14-2012, 07:48 PM

I went staggered

Uploaded with ImageShack.us

dghits26 · 10-14-2012, 07:49 PM

Im lowered in kw v1's ..The back are all the way down. I planned to bring the front down just a little.

zipstic · 10-24-2012, 03:29 PM

Quote:

Originally Posted by dghits26

Im lowered in kw v1's ..The back are all the way down. I planned to bring the front down just a little.

Are you sure? I have KW V1's too and my rear is lower. (Perhaps it's the angle of the photo.)

teege · 10-24-2012, 08:46 PM

Quote:

Originally Posted by zipstic

Are you sure? I have KW V1's too and my rear is lower. (Perhaps it's the angle of the photo.)

ahh you finally went with the V1's. glad to hear

zipstic · 10-25-2012, 09:25 AM

Quote:

Originally Posted by teege

ahh you finally went with the V1's. glad to hear

Yep! It took me a long time to make a decision, but I ended up with the V1's and love them. They aren't harsh by any means and the car feels so much more planted. Best mod I've done to my car.

dghits26 · 10-26-2012, 07:58 AM

Yea I think it's the angle I show another pic

dghits26 · 10-26-2012, 08:00 AM

P40's

Uploaded with ImageShack.us

dghits26 · 10-26-2012, 08:02 AM

another pic ..i got the center caps..

Uploaded with ImageShack.us

dghits26 · 10-26-2012, 08:05 AM

The perches are down to the max. The front are half way

Uploaded with ImageShack.us

dghits26 · 10-26-2012, 08:07 AM

It's about a one and a half finger gap in the back and a one finger gap in the front

dghits26 · 10-26-2012, 08:13 AM

I thought about taking out the Pearch out which would drop it another inch

zipstic · 10-26-2012, 01:51 PM

Quote:

Originally Posted by dghits26

It's about a one and a half finger gap in the back and a one finger gap in the front

Must be the picture then. I'm at about the same as you front and back.

X.X.I.V · 10-31-2012, 10:17 AM

Quote:

Originally Posted by dghits26

I went staggered

Uploaded with ImageShack.us

Those wheels are pure sex
What tires did you end up adding

10-07-2012, 05:18 PM	#1
dghits26 Major 282 Rep 1,125 Posts Drives: M3 Join Date: Jan 2012 Location: Stamford ct iTrader: (2)	m359 staggered Im about to put theses on my 328 xi and wanted to know that theses were the correct tire size 19" 8.5 ET 35 front and 19" 9.5 ET 35 rears with 235/35/19 front rubber and 265/30/19 rear? Or should I go non staggered..If i go non staggered with wider tires and spacers with that put the same wear on the crank case? I saw someone had trouble with hearing a clunking sound...
	Appreciate 0 Tweet Quote

10-07-2012, 05:44 PM	#2
Chrisred Captain 62 Rep 788 Posts Drives: BMW 335xi coupe Join Date: Jan 2010 Location: Montreal, Canada iTrader: (0)	Ya go square or keep the oem 19" sizes. 225/255. Research the offsets. Rolling diameter is good with those sizes. Thank god my tires are finishes (same as u wanted). Got sick of that clunk.... __________________ JB4 Trebila tuned cp-e IC AMS exhaust BMS DCI AR DP's METH RB TURBO 19" VMR VB3 Stoptech BBK TC KLINE VORSHLAG SPEC STG 3 OSS design
	Appreciate 0 Quote

10-07-2012, 06:07 PM	#4
dghits26 Major 282 Rep 1,125 Posts Drives: M3 Join Date: Jan 2012 Location: Stamford ct iTrader: (2)	If i go non staggered with wider tires and spacers with that put the same wear on the crank case?
	Appreciate 0 Quote

10-09-2012, 11:43 AM	#5
Chrisred Captain 62 Rep 788 Posts Drives: BMW 335xi coupe Join Date: Jan 2010 Location: Montreal, Canada iTrader: (0)	OEM 19's from dealer are 225/35/19 & 255/30/19 Plug in that on tire section calculator and u will see that rolling diameter difference is way below your 235/265 setup. Therefore it's good for your xi So either go with oem size or square __________________ JB4 Trebila tuned cp-e IC AMS exhaust BMS DCI AR DP's METH RB TURBO 19" VMR VB3 Stoptech BBK TC KLINE VORSHLAG SPEC STG 3 OSS design
	Appreciate 0 Quote

10-10-2012, 08:58 PM	#6
e9xslow Emperor 93 Rep 182 Posts Drives: 2006 330xi Join Date: Apr 2012 Location: Queens, NY iTrader: (2) Garage List 2006 330xi [0.00]	dont go staggered, could fuck up differential and will wear unevenly.
	Appreciate 0 Quote

10-12-2012, 03:19 PM	#9
rje RJE 335xi E90 Monaco Blue/Lemon, MB C350 White/Blk 12 Rep 149 Posts Drives: 07-335xi E90, 07 MDX,11 C350-4 Join Date: Nov 2007 Location: Calgary, Canada iTrader: (0)	Go staggered. I have this set up with M359 and Conti Extreme Conti. 19x9.5 35ET, 19x10 38ET, 235/35/19 front and 265/30/19. If you are not that lowered, like mine (I have KW V1s) because of snow, I would use 275 instead of 265. It looks like I could use a 15mm spacer on the rear.
	Appreciate 0 Quote

10-14-2012, 07:48 PM	#10
dghits26 Major 282 Rep 1,125 Posts Drives: M3 Join Date: Jan 2012 Location: Stamford ct iTrader: (2)	I went staggered Uploaded with ImageShack.us
	Appreciate 0 Quote

10-14-2012, 07:49 PM	#11
dghits26 Major 282 Rep 1,125 Posts Drives: M3 Join Date: Jan 2012 Location: Stamford ct iTrader: (2)	Im lowered in kw v1's ..The back are all the way down. I planned to bring the front down just a little.
	Appreciate 0 Quote

10-26-2012, 07:58 AM	#15
dghits26 Major 282 Rep 1,125 Posts Drives: M3 Join Date: Jan 2012 Location: Stamford ct iTrader: (2)	Yea I think it's the angle I show another pic
	Appreciate 0 Quote

10-26-2012, 08:00 AM	#16
dghits26 Major 282 Rep 1,125 Posts Drives: M3 Join Date: Jan 2012 Location: Stamford ct iTrader: (2)	P40's Uploaded with ImageShack.us
	Appreciate 0 Quote

10-26-2012, 08:02 AM	#17
dghits26 Major 282 Rep 1,125 Posts Drives: M3 Join Date: Jan 2012 Location: Stamford ct iTrader: (2)	another pic ..i got the center caps.. Uploaded with ImageShack.us
	Appreciate 0 Quote

10-26-2012, 08:05 AM	#18
dghits26 Major 282 Rep 1,125 Posts Drives: M3 Join Date: Jan 2012 Location: Stamford ct iTrader: (2)	The perches are down to the max. The front are half way Uploaded with ImageShack.us
	Appreciate 0 Quote

10-26-2012, 08:07 AM	#19
dghits26 Major 282 Rep 1,125 Posts Drives: M3 Join Date: Jan 2012 Location: Stamford ct iTrader: (2)	It's about a one and a half finger gap in the back and a one finger gap in the front
	Appreciate 0 Quote

10-26-2012, 08:13 AM	#20
dghits26 Major 282 Rep 1,125 Posts Drives: M3 Join Date: Jan 2012 Location: Stamford ct iTrader: (2)	I thought about taking out the Pearch out which would drop it another inch
	Appreciate 0 Quote