|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
My car won't start after new battery
|
|
01-03-2013, 04:51 PM | #1 |
Private
5
Rep 55
Posts |
My car won't start after new battery
So my car was dead in the morning after parking it. Battery read 11.5v so I replaced it. Now everything works but the gauges, they light up but dnt move. When I try to start it everything shuts off? I don't know what to check next please help!! Thanks
|
01-03-2013, 05:03 PM | #2 |
Major
64
Rep 1,087
Posts
Drives: 2006 BMW 325i
Join Date: Apr 2011
Location: Hot Springs, AR
|
Could be something as simple as a miss-connected wire, but it sounds like you will need to visit the dealer (or have the BAV tool) to have the new battery registered to the car.
Search the forum and you'll see what I'm taking about.
__________________
|
Appreciate
0
|
01-04-2013, 10:46 AM | #4 |
Private First Class
5
Rep 156
Posts |
This is about as easy a piece of maintenance as there is, so what could be wrong?
Battery was not sufficiently charged prior to install. Check with multimeter. Loose or missed connection. Recheck your work. Blown fusible link. This is some sort of fuse that cuts your battery out in the event of a significant accident. Don't know how this could be blown, unless... You hooked it up backwards... Always possible, and if so, you may have burned up all sorts of electronic gizmos. Another potential problem is if you disconnected the positive terminals first, and they flopped around and touched anything that was grounded out to the chassis, you may have fried a fuse or a component. Failure to register the battery will not cause this problem, it only affects the longevity of the battery secondary to improper charging. If it is not the first two, it sounds like something probably fried, and maybe a bit of expertise is required. |
Appreciate
0
|
01-04-2013, 10:59 AM | #5 |
First Lieutenant
31
Rep 365
Posts |
could be something to do with car computer... i had mine coded last night and this happned. So it could be that you reset the computer and its back to the older firmware/software and the guages are not moving cuz it needs the newer software...
__________________
06 330i SGM
|
Appreciate
0
|
01-04-2013, 11:06 AM | #6 |
Private
5
Rep 55
Posts |
Ill check the fuses when I'm out of work, I disconnected the negative first and put a sick over it. If no fuses are bad ill have it scanned. I hope it didn't revert back to old software. Any way any idea what fuses to check ? Thanks
|
Appreciate
0
|
01-04-2013, 02:33 PM | #7 |
Lieutenant Colonel
136
Rep 1,598
Posts |
If it's not a fuse than it could be one of your sensors that went bad, has your car been running rough or has the idle been jumping around before the battery died?
By the way do you take short trips a lot? |
Appreciate
0
|
01-04-2013, 06:53 PM | #10 | |
Private First Class
11
Rep 140
Posts |
Quote:
Get your battery registered thou so this doesnt happen again
__________________
2006 330i | AW | 6MT | ZSP | LOGIC | ADAPTIVE | PBX
|
|
Appreciate
0
|
Bookmarks |
|
|