[tommay248]

So im having my dp's and O2 sensor, rix gage, and Borla installed. Things are not final yet, but when I turned the igntion on to see if the gage worked (without starting) I got a code that says something like SOS inactive or something... its the SOS letters and a picture of a phone with a line through it.... Dont see anything in the manual

Any ideas?
THe car is in a steel building, would that block the signal?

[jpsimon]

The only time I ever got that message was when my Amp was blown and no audio in the car worked

[tommay248]

weiiird, ill check to see if the radio works... any idea what may have caused it?

[jpsimon]

A body shop punctured a drain pipe from the sunroof which leaked water down into where the amp was and it blew. I doubt that is the cause of your issue though

[tommay248]

yeah it cant be that, hopefully when it gets completed and out of the steel building it will go away, i hope at least, I mean the engine is going to sound great but I do love NPR in the morning

[Septro]

You check your fuse box? Could be as simple as that.

[tommay248]

I havent been over there, just trying to get a head start on the issue

Apparently they disconnected the battery to do some welding, I will know soon hopefully

WIll def check fuses