[cuco]

Nice comparo! Hopefully all frm2 owners will be happy

[nitehawk]

@************* I checked my daten as you explained and to my surprise, BFD_2_BLINK_FREQ_EIN and BFD_2_BLINK_FREQ_AUS are already set to wert_01.

I also have a 2007 E92 335i, frm1, US Spec.
I haven't done anything yet but do I still need to write back the daten file or...
Does it mean all I have to change is BFD_2_ALGORITHMUS to aktiv and any of the following to wert_03:


BFD_2_RL_BL_ERSCH_BILD = brake light
BFD_2_BL_M_ERSCH_BILD = 3rd Brake light
BFD_2_RL_BL_1_ERSCH_BILD = brake light 1
BFD_2_RL_BL_2_ERSCH_BILD = brake light 2
BFD_2_NSL_ERSCH_BILD = rear fog lamp

Attached is my trc file and diss-assembled daten

[joepcrepairs2]

Originally Posted by nitehawk

@************* I checked my daten as you explained and to my surprise, BFD_2_BLINK_FREQ_EIN and BFD_2_BLINK_FREQ_AUS are already set to wert_01.

I also have a 2007 E92 335i, frm1, US Spec.
I haven't done anything yet but do I still need to write back the daten file or...
Does it mean all I have to change is BFD_2_ALGORITHMUS to aktiv and any of the following to wert_03:


BFD_2_RL_BL_ERSCH_BILD = brake light
BFD_2_BL_M_ERSCH_BILD = 3rd Brake light
BFD_2_RL_BL_1_ERSCH_BILD = brake light 1
BFD_2_RL_BL_2_ERSCH_BILD = brake light 2
BFD_2_NSL_ERSCH_BILD = rear fog lamp

Attached is my trc file and diss-assembled daten

heres a copy of my trc and my daten as well so you can compare with yours..

i have my rear fog lights to blink under hard braking .

[joepcrepairs2]

Originally Posted by nitehawk

@************* I checked my daten as you explained and to my surprise, BFD_2_BLINK_FREQ_EIN and BFD_2_BLINK_FREQ_AUS are already set to wert_01.

I also have a 2007 E92 335i, frm1, US Spec.
I haven't done anything yet but do I still need to write back the daten file or...
Does it mean all I have to change is BFD_2_ALGORITHMUS to aktiv and any of the following to wert_03:


BFD_2_RL_BL_ERSCH_BILD = brake light
BFD_2_BL_M_ERSCH_BILD = 3rd Brake light
BFD_2_RL_BL_1_ERSCH_BILD = brake light 1
BFD_2_RL_BL_2_ERSCH_BILD = brake light 2
BFD_2_NSL_ERSCH_BILD = rear fog lamp

Attached is my trc file and diss-assembled daten

so looking at your trc file

you also need to enable this :

BFD_2_ALGORITHMUS - BRAKE FORCE DISPLAY STAGE 2 ALGORITHM

after you set that to aktiv, just customize which light you want to blink as brake for display for example i like my rear fog lights to blink... but thats my preference....



so if you want your rear fogs to blink you have to set this to wert_03

BFD_2_NSL_ERSCH_BILD - BRAKE FORCE DISPLAY STAGE 1 REAR FOG LIGHTS APPEARANCE

[sono0312]

Originally Posted by sono0312

i just made a comparison table as attached using trc file between one from cuco and the another from myself (sono). i do not know if those are the ones i need to change. but anyway i will try according to this.

these are not all delta but i picked up ones that should be something related to bfd...
would you please give me a feedback if there is something missing?

is there anyone who knows "Check control notification" meaning as attached?
these are the delat that i found from cuco's trc related to bfd.

[cuco]

Save you trc original and save a new copy with everything exactlly as it in my trc. Write the modified copy to your frm2, id it doen't work go back to your original.

[sono0312]

i at last made it happen with the changes described in the table uploaded on #154. i just follow the value from cuco except for "BREMSL_FKT_MIT_BFD" as it set to "nicht_aktiv". if you set it to "aktiv" you will have a spare bulb lit next to the brake lamp together.

See video i created this morning.

only thing where i need a further investigation is that a third brake did not blink although i set "BFD2_BL_M" to "blinkend".

Thankyou cuco! i made it because of your great contribution to the trc uploaded.

[sono0312]

supplemental info for #161...

brake lamp consists of three lamps, outer, inner and third lamp. outer lamp is working as a normal condition, inner lamp just for emargency such as in the event of a fault of outer lamp.

normal brake: only outer brake and third lamp will be lit.
hard brake: outer and inner lamp are blinking, and fog lamp will be lit together.

[cuco]

Awesome! Glad you made it

[nitehawk]

Originally Posted by *************

so looking at your trc file

you also need to enable this :

BFD_2_ALGORITHMUS - BRAKE FORCE DISPLAY STAGE 2 ALGORITHM

after you set that to aktiv, just customize which light you want to blink as brake for display for example i like my rear fog lights to blink... but thats my preference....



so if you want your rear fogs to blink you have to set this to wert_03

BFD_2_NSL_ERSCH_BILD - BRAKE FORCE DISPLAY STAGE 1 REAR FOG LIGHTS APPEARANCE

Thanks!

I would like to have my brake lights enabled to blink
Would you or anyone know what brake light 1 and 2 are? Is that what you were referring to @sono0312 for inner/outer?
BFD_2_RL_BL_1_ERSCH_BILD = brake light 1
BFD_2_RL_BL_2_ERSCH_BILD = brake light 2

I have an e92, so does the above apply to me? e92 only has one brake light plus fog, so is changing the above needed...or can I just change the following to wert_03:

BFD_2_RL_BL_ERSCH_BILD

[sono0312]

Originally Posted by sono0312

i at last made it happen with the changes described in the table uploaded on #154. i just follow the value from cuco except for "BREMSL_FKT_MIT_BFD" as it set to "nicht_aktiv". if you set it to "aktiv" you will have a spare bulb lit next to the brake lamp together.

See video i created this morning.

only thing where i need a further investigation is that a third brake did not blink although i set "BFD2_BL_M" to "blinkend".

Thankyou cuco! i made it because of your great contribution to the trc uploaded.

for frm2, is there anyone who know how to make it possible to have a third brake lamp blinking?

it does not work on my cay although i set "BFD2_BL_M" to "blinkend"

[vanondemand]

my 07 e92 335i US specs build date 01/07

I got the rear fogs blinking coding this:

BFD_2_ALGORITHMUS to AKTIV

BFD_2_NSL_ERSCH_BILD to Wert_03

BFD_BLINKEN to 5_hz

[vanondemand]

It still blinks as slow as the first videos by joe

[w2830]

Originally Posted by *************

this should work for frm2


BFD2_AKTIV : set to aktiv


now choose whatever you want to enable as brake force dispay

BFD2_BL_M - BRAKE FORCE DISPLAY WITH THIRD BRAKE LIGHT
BFD2_NSL - BRAKE FORCE DISPLAY WITH REAR FOG LIGHTS
BFD2_BL - BRAKE FORCE DISPLAY WITH BRAKE LIGHTS

so whatever you want to blink set them to :
blinkend = blinking

now for the binking freqquency if you want them to blink fast or slow

set this value to whatever blinking frequency you want

BFD2_BLINKEN - BRAKE FORCE DISPLAY FLASHING
3Herts(slow) = 3_hz
5Hertz(fast)=5_hz

Anyone has any luck with this? I've have tried and it didn't work.Mine is 08 e92. Any idea what I might be missing?

[gqbriel]

Hi guys,

Anyone has tried and managed to get the BFD working on FRM3?
Do I need to add some $xx to the VO of the car..

335i originally FRM1 - upgraded to FRM3 and complete LCI of the all car.

Thanks in advance.

I have attached the FRM3 file - thanks in advance !!

[LMB335IS]

Originally Posted by gqbriel

Hi guys,

Anyone has tried and managed to get the BFD working on FRM3?
Do I need to add some $xx to the VO of the car..

335i originally FRM1 - upgraded to FRM3 and complete LCI of the all car.

Thanks in advance.

I have attached the FRM3 file - thanks in advance !!

I've asked this as well and this is what someone told me to do just haven't gotten around to trying it. Feel free.

Add $5AH to your VO and recode NFRM

[cdadanny]

Originally Posted by Toad335

I found this while looking throgh my NFRM. Very interesting. Looks like you can enable a second level (BFD2) of the brake force braking. With this you can enable blinking of various lights. Seems hard to test, but would be interesting to learn more about...

    BFD2_AKTIV                  
*       nicht_aktiv                 not active
        aktiv                       active
    BFD2_ESS_ENABLE             
*       nicht_aktiv                 not active
        aktiv                       active
    BFD2_ESS_ANZEIGE            
*       nicht_aktiv                 not active
        aktiv                       active
    BFD2_SL_BL_1                
*       nicht_aktiv                 not active
        dauer_an                    
        blinkend                    flashing
    BFD2_SL_BL_2                
*       nicht_aktiv                 not active
        dauer_an                    
        blinkend                    flashing
    BFD2_BFD                    
*       nicht_aktiv                 not active
        dauer_an                    
        blinkend                    flashing
    BFD2_BL_M                   
*       nicht_aktiv                 not active
        dauer_an                    
        blinkend                    flashing
    BFD2_NSL                    
*       nicht_aktiv                 not active
        dauer_an                    
        blinkend                    flashing
    BFD2_BL                     
*       nicht_aktiv                 not active
        dauer_an                    
        blinkend                    flashing
    BFD2_BLINKEN                
*       3_hz                        
        5_hz                        
    BFD2_V_MIN                  
*       wert_01                     value 01
*       wert_02                     value 02
    BFD2_A_MIN                  
*       wert_01                     value 01
        wert_02                     value 02
    BFD2_A_LOE                  
        wert_01                     value 01
*       wert_02                     value 02
    BFD2_T_ABS                  
*       wert_01                     value 01
        wert_02                     value 02

can I use this in my E90 2011/6 LCI with NFRM ( FRM3 ) ?
thx

[M3ighty]

Was wondering the above would work for an 2012, E92 M3?

[ATTN]

Has anyone tried to use Carly for BMW application to code BFD?

I've tried this option as it was available to code.

Coded rear fogs (inner) to flash under hard braking above 20kmph. It works however doesn't flash comes up still??

I just want inner to flash under braking and outter to perform as usual.

[cdadanny]

attached is my original trace file. does anyone know what to change to get my bfd working ? blinking fog and blinking thirth light on 5 Hz .

Thx

[mrjcover]

Nobody still hasn't figured this out???

[gqbriel]

Originally Posted by cdadanny

attached is my original trace file. does anyone know what to change to get my bfd working ? blinking fog and blinking thirth light on 5 Hz .

Thx

Try these :

BFD_1_RL_BL_ERSCH_BILD = brake light wert_03 = flashing
BFD_1_BL_M_ERSCH_BILD = 3rd Brake light wert_03 = flashing
BFD_1_RL_BL_1_ERSCH_BILD = brake light 1 wert_03 = flashing
BFD_1_RL_BL_2_ERSCH_BILD = brake light 2 wert_03 = flashing
BFD_1_NSL_ERSCH_BILD = rear fog lamp wert_03 = flashing


And try the same iwth BFD_2_....