DIY: Add the OEM multimedia device pouch for iPod, iPhone and other media players

Imperator · 02-13-2011, 06:23 PM

Not long ago, BMW used to include nice details such as these. Unfortunately, bean counters added their influence lately and began decontenting our cars. I believe some 2006 and 2007 models with iDrive and the aux input/USB option got this pouch piece preinstalled from the factory, but it was dropped by the 2009 model year.

I have a 2010 car with the 6FL smartphone option and keep an iPod Touch in my car as a near-permanent fixture. I like to keep my center console tidy and free to store as many accessories as possible, and this pouch helps to keep your iPhone or iPod out of the way. It also gives me a little more confidence in keeping my iPod Touch away from prying eyes and hands whenever my car is parked by valet attendants.

This is a very simply DIY but I apologize for not illustrating the installation procedure better. Fortunately, all you need is a steady hand, a good screwdriver and some patience.

Parts needed:

51169148062 - Multimedia Holder ($43.50 from Tischer)
07149158767 - Fillister Head Screw (quantity of 3) ($0.14/ea from Tischer)
20mm torx driver

This is what the leather pouch and set of screws will look like prior to installation:

Start by opening your center console lid and arrange the contents so that it will allow the pouch to fit on the underside of the lid when closed. Test the fitment of the pouch with your multimedia player. I'm using a 4th-gen iPod Touch but have found it also works with iPhones and some Android devices.
Push the center console lid all the way open until it locks upright. Open the multimedia pouch so that the three interior screw holes are exposed. There is a felt-lined cover that secures over these screws once installed.
Hold the pouch in place with one hand while you start one of the screws. The screws are self-tapping but requires pressure to start threading into the plastic. I don't recommend pre-drilling the holes to prevent damage to the leather top side of the cover. The screws will not penetrate to the padding or leather once installed.
Push the protective felt lining piece back in place so that it covers the torx screws.
Connect your device to the USB or phono cable first, then drop your device into the pouch. Secure the sides of the pouch with the velcro strap.
Close the top of the pouch over the velcro strip.
Close the console lid slowly, making sure the cable is clear of any pinch points.
Enjoy the extra storage space! Easiest DIY ever!

posite · 02-13-2011, 07:56 PM

Nice! I'll be looking into this.

DoPedUpM3 · 02-14-2011, 07:49 PM

Looks clean and oem, I have one pouch laying around I may use this! Thanks for the write up.

Neutrino45 · 02-17-2011, 05:46 PM

Wow, $43 for the pouch????

rideontwo · 02-17-2011, 09:25 PM

Quote:

Originally Posted by Neutrino45

Wow, $43 for the pouch????

Not just any pouch. Its a genuine BMW Pouch.

Blindrage606 · 02-18-2011, 10:48 PM

How would one get any practical usage out of this? Changing songs, etc?

Imperator · 02-19-2011, 12:22 AM

Quote:

Originally Posted by Blindrage606

How would one get any practical usage out of this? Changing songs, etc?

iDrive controller or steering wheel controls maybe? Works great in my car.

michael1284 · 09-05-2011, 10:36 PM

Haha, just made one of these out of an ipod pouch i had. can't remember if it came w/ my ipod touch or what. just put some velcro on the back and then velcro on the armrest. bam free holder!

OAKernie · 09-07-2011, 01:39 PM

Quote:

Originally Posted by Imperator

iDrive controller or steering wheel controls maybe? Works great in my car.

so if my car isn't equipped with IDRIVE and i have the AUX/USB port

will i be able to switch songs on my steering wheel through my iphone???

mosx · 09-07-2011, 04:09 PM

My 1 series came with this stock, I was kinda surprised the 3 series doesn't include it. Nice to know you can buy it after the fact though.

OAKernie · 09-07-2011, 05:41 PM

also where can you buy those cables?

02-13-2011, 06:23 PM	#1
Imperator Major 52 Rep 1,175 Posts Drives: 2010 E92 335i Join Date: Mar 2010 Location: Plano, Texas iTrader: (8)	DIY: Add the OEM multimedia device pouch for iPod, iPhone and other media players Not long ago, BMW used to include nice details such as these. Unfortunately, bean counters added their influence lately and began decontenting our cars. I believe some 2006 and 2007 models with iDrive and the aux input/USB option got this pouch piece preinstalled from the factory, but it was dropped by the 2009 model year. I have a 2010 car with the 6FL smartphone option and keep an iPod Touch in my car as a near-permanent fixture. I like to keep my center console tidy and free to store as many accessories as possible, and this pouch helps to keep your iPhone or iPod out of the way. It also gives me a little more confidence in keeping my iPod Touch away from prying eyes and hands whenever my car is parked by valet attendants. This is a very simply DIY but I apologize for not illustrating the installation procedure better. Fortunately, all you need is a steady hand, a good screwdriver and some patience. Parts needed: 51169148062 - Multimedia Holder ($43.50 from Tischer) 07149158767 - Fillister Head Screw (quantity of 3) ($0.14/ea from Tischer) 20mm torx driver This is what the leather pouch and set of screws will look like prior to installation: Start by opening your center console lid and arrange the contents so that it will allow the pouch to fit on the underside of the lid when closed. Test the fitment of the pouch with your multimedia player. I'm using a 4th-gen iPod Touch but have found it also works with iPhones and some Android devices. Push the center console lid all the way open until it locks upright. Open the multimedia pouch so that the three interior screw holes are exposed. There is a felt-lined cover that secures over these screws once installed. Hold the pouch in place with one hand while you start one of the screws. The screws are self-tapping but requires pressure to start threading into the plastic. I don't recommend pre-drilling the holes to prevent damage to the leather top side of the cover. The screws will not penetrate to the padding or leather once installed. Push the protective felt lining piece back in place so that it covers the torx screws. Connect your device to the USB or phono cable first, then drop your device into the pouch. Secure the sides of the pouch with the velcro strap. Close the top of the pouch over the velcro strip. Close the console lid slowly, making sure the cable is clear of any pinch points. Enjoy the extra storage space! Easiest DIY ever! Attached Images
	Appreciate 0 Tweet Quote

02-13-2011, 07:56 PM	#2
posite Second Lieutenant 12 Rep 232 Posts Drives: 07 335i Join Date: Jan 2011 Location: TX iTrader: (5)	Nice! I'll be looking into this.
	Appreciate 0 Quote

02-14-2011, 07:49 PM	#3
DoPedUpM3 El Carpe Diem 16 Rep 219 Posts Drives: Porsche Turbo/ 335i Coupe Join Date: May 2010 Location: Southern Cali. iTrader: (4) Garage List 2008 335i [0.00]	Looks clean and oem, I have one pouch laying around I may use this! Thanks for the write up. __________________ 08' AW e92 335i 6mt, Performance sterring wheel (non-electric)/ Performance SSK/ M-tec wheel trim/ BMS DCI/ Bimmian Interior LEDs/ Side-marker LEDs/ WeissLicht PY24 LED Turn Signal/ GPThunder/ Debadge/ Painted reflectors/ Matte black grills/ Aero front lip/ Rear bumper/ Stock.. much more fun to come.
	Appreciate 0 Quote

02-17-2011, 05:46 PM	#4
Neutrino45 Major 62 Rep 1,452 Posts Drives: XXX Join Date: Aug 2008 Location: milky way iTrader: (2)	Wow, $43 for the pouch???? __________________
	Appreciate 0 Quote

02-18-2011, 10:48 PM	#6
Blindrage606 PC Enthusiast//Overclock.net 2 Rep 163 Posts Drives: e92 328i,2007 Join Date: Jul 2010 Location: Texas iTrader: (0)	How would one get any practical usage out of this? Changing songs, etc? __________________ 2007 e92 328i - 6MT/ iDrive/ Jet Black/ BlackLthr/ Style 197/ M3 Spoiler/ Intake scoops Charcoal Delete/ BMW Prfmce Interior/ GPT 7500k's/ Black Grills/ Hardwired Radar / Mtec LED /Refector Delete /30%Tint/18mmRear/ WthrTech
	Appreciate 0 Quote

09-05-2011, 10:36 PM	#8
michael1284 Colonel 206 Rep 2,627 Posts Drives: 2018 M3 Comp Join Date: Apr 2010 Location: DFW iTrader: (44)	Haha, just made one of these out of an ipod pouch i had. can't remember if it came w/ my ipod touch or what. just put some velcro on the back and then velcro on the armrest. bam free holder! __________________ e92, e90, f30 #DieselLife, e46, f80
	Appreciate 0 Quote

09-07-2011, 04:09 PM	#10
mosx The mod bug has bitten. 22 Rep 565 Posts Drives: 2008 M3 Sedan Join Date: Jun 2010 Location: North Texas iTrader: (1) Garage List 2008 BMW M3 [0.00]	My 1 series came with this stock, I was kinda surprised the 3 series doesn't include it. Nice to know you can buy it after the fact though.
	Appreciate 0 Quote

09-07-2011, 05:41 PM	#11
OAKernie www.oakapparelco.com 3 Rep 180 Posts Drives: 08 Jet Black e90 Join Date: Dec 2010 Location: LA Socal 626 iTrader: (0)	also where can you buy those cables?
	Appreciate 0 Quote