|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
|
BMW 3-Series (E90 E92) Forum
>
Menzerna polishes, which to choose?
|
|
02-10-2009, 01:18 PM | #1 |
2006 join date crew
182
Rep 1,482
Posts |
Menzerna polishes, which to choose?
Hello. I want to get my car polished before summer, will do a big winter clean-up. And I was looking at the Menzerna polishes. There are so much of them that I got confused on which one to get.
My car (Sparkling Graphite) doesn't have many scratches or swirl marks (I always washed it with mf mit), so I though getting a heavy compound would not be necessary. So how about getting a PO91E (Intensive Polish) and finish with PO106FF? How is that combination? I just need some advice before spending any money, and btw I have a random-orbit polisher thing (if that determines the type of polish I should be using) Thanks in advance |
02-10-2009, 01:24 PM | #2 |
360
Rep 5,052
Posts |
You selected a great two step combination of Menzerna polishes. Intensive Polish is a great medium cut polish that I'll typically apply using an orange light cutting pad. Then follow up with PO106FF on a white pad for amazing depth and gloss and to remove any micro-marring or hazing left behind from IP. You could look into Super Intensive Polish (PO83) as an alternative to the regular IP, it will work longer, dust less and finish down nicer than regular IP. Since you're finishing with the PO106FF, the ability to finish down finer isn't an issue, it'd be more for convenience and easier workability primarily.
You certainly won't be disappointed with the IP / 106 combo. Be sure to keep us posted on how things turn out for you once you get a chance to detail your car. George |
Appreciate
0
|
02-10-2009, 06:15 PM | #4 |
Brigadier General
98
Rep 3,599
Posts |
what is everyones opinion with the blackfire, i've read some things. I just ordered some stuff to try it this weekend but before i use it just wondering what everyone else thought.
__________________
Legal Disclaimer: Anything I or anyone else says about my vehicle on this website, pertaining to modifications does not actually represent anything actually existing on my car, and thus, cannot be held against me in any issues, i.e. warranty claims, that may arise.
|
Appreciate
0
|
02-10-2009, 08:42 PM | #5 |
Completely obsessed with detailing
299
Rep 15,442
Posts
Drives: E90 SG 330i, white Scion tC
Join Date: Nov 2006
Location: San Francisco and Davis
|
i suggest looking into power finish, PO203S. it's got about as much cut as SIP but finishes like 106FF/A. That coupled with PO85RD has become my favorite new combo for polishing
|
Appreciate
0
|
02-10-2009, 09:15 PM | #6 |
Brigadier General
98
Rep 3,599
Posts |
sounds good i'll give them a try if i absolutely hate this blackfire stuff.
i've heard very good things about the power stuff.
__________________
Legal Disclaimer: Anything I or anyone else says about my vehicle on this website, pertaining to modifications does not actually represent anything actually existing on my car, and thus, cannot be held against me in any issues, i.e. warranty claims, that may arise.
|
Appreciate
0
|
02-11-2009, 06:32 PM | #7 |
2006 join date crew
182
Rep 1,482
Posts |
I got my polisher out to see if it still works and then I noticed that it has a different plate for pads. My polisher uses bonnets, and as far as I can tell I will need pads for a proper polish.
So I looked at various detailing supplies websites and they all sell backing plates for pads, but could not find one for my model (I have a Craftsman 7-8in random orbit polisher/buffer). So by looking at the pictures can you guys tell me what kind of backing plate will fit my machine? The diameter is 7 inches. and the hole inside, a ball-bearing, has a 5/16 of an inch diameter. Thanks in advance |
Appreciate
0
|
02-13-2009, 05:53 PM | #10 |
2006 join date crew
182
Rep 1,482
Posts |
|
Appreciate
0
|
02-13-2009, 06:47 PM | #11 |
Lieutenant
23
Rep 517
Posts
Drives: 2007 BMW 328i
Join Date: Mar 2007
Location: Los Angeles
|
Look into a Porter Cable or Flex polisher
__________________
[2007 328i|Black Sapphire|Terra Leather|6 MT|Xenon headlights|BMW Alarm|Clear Bra|Stainless Steel Pedal Pads|Black Line Tails|MTEC V3.0 Angel Eyes|HUPER OPTIK 30 Ceramic TINT|GPThunder Fogs|LED License Plate mod|Sport Shocks/Springs upgrade|ZHP Shift Knob|//M Dead Pedal|Matte Black Grill|Aluminum Strut Bar|Cyba Air Scoops|Rear Fog Switch|Perforated Mtech Wheel|Miro 935s|Hankook v12 evo Tires|BMW SSK]| BMW PE
|
Appreciate
0
|
02-13-2009, 07:06 PM | #12 |
Completely obsessed with detailing
299
Rep 15,442
Posts
Drives: E90 SG 330i, white Scion tC
Join Date: Nov 2006
Location: San Francisco and Davis
|
|
Appreciate
0
|
02-13-2009, 11:34 PM | #13 |
2006 join date crew
182
Rep 1,482
Posts |
OK, thanks guy. My big clean up plan is ruined
I was looking at these Makita polishers/sanders. I like the 9227C because it has this handle that goes all around. Is that polisher as good as PC/Flex, or I should look into those? |
Appreciate
0
|
02-13-2009, 11:59 PM | #14 | |
Completely obsessed with detailing
299
Rep 15,442
Posts
Drives: E90 SG 330i, white Scion tC
Join Date: Nov 2006
Location: San Francisco and Davis
|
Quote:
the PC and Flex 3401(i think) are random orbital polishers that probably won't burn the paint. the drawback with that is that it doesn't work as fast or cut as well as the Makita. Makita 9227c is a rotary polisher which CAN burn your paint if you aren't careful. I suggest researching the rotary polisher techniques before you actually try it on your car. If you do end up with this, don't be afraid to use it on your car first. Just keep the thing in motion the ENTIRE time or you WILL burn the paint. I started out with a polisher very similar to the makita and am going to buy one once mine breaks. It can be done, and you just need to take some time to get the feeling down. |
|
Appreciate
0
|
02-14-2009, 12:03 AM | #15 |
Captain
30
Rep 949
Posts |
Get a makita it's cheaper than a flex and it's a true rotary so you can use it for other stuff as well like refinishing furniture. You can get it here and it comes with a pretty nice bag. You can get a 3m backing plate for another $40-$50. Then get your pads at detailed image. I wouldn't use the pads that come with the polisher on your car.
__________________
2008 e92 335i Step | Is Gone - It was fun but not meant to be | M3 - Cancelled | 135 Ordered
|
Appreciate
0
|
02-14-2009, 12:11 AM | #16 |
2006 join date crew
182
Rep 1,482
Posts |
Appreciate the input guys. I did some searching, read some user reviews, looks like FLEX beats PC by a long shot. But that thing costs twice as much as PC/Makita.
|
Appreciate
0
|
02-14-2009, 12:22 AM | #17 |
Captain
30
Rep 949
Posts |
People are not going to deny that the flex is good - I just couldn't justify the cost. I did some research and read posts by a fellow forum member and a detailing guru (Picus)
Picus had nothing but good things to say about its reliability so I jumped on it. My neighbor has a bunch of old cars that he's working on, I asked him if I can practice on his cars and went to town.
__________________
2008 e92 335i Step | Is Gone - It was fun but not meant to be | M3 - Cancelled | 135 Ordered
|
Appreciate
0
|
Bookmarks |
Thread Tools | Search this Thread |
|
|