|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Modular 3mm Spacers, Stackable, Use with Existing Spacers, Etc - $15
|
|
10-30-2015, 06:32 PM | #1 |
Banned
1
Rep 5
Posts |
Modular 3mm Spacers, Stackable, Use with Existing Spacers, Etc - $15
I'm selling these modular 3mm (1/8") spacers. If you have a set of 12, 15, 18mm spacers and would like to have the ability to cheaply make them modular to a slightly different width, these are for you. They can also be run without any other spacer to give you an additional 3mm of clearance or stacked up to 3 thick (use of hub extender required over 6mm width). These are CNC laser cut from 5052 aluminum and typically have a tolerance of +/- 0.002" to ensure a precision fit. The images in the pics are fresh off the laser and I haven't deburred or cleaned them up so they'll look a bit better when you get them. The centers will also be chamfered to allow for clearance on the stock hub and any spacer that has a chamfer built in to its hub. To remain hubcentric when stacking or when used with an existing spacer, you only need to measure how far the hub sticks out and confirm that it is more than the chamfer depth on your wheels. Typically most wheel have chamfers under 4mm in depth, so I recommend making sure you have at least 5mm of hub sticking out before mounting your wheels. Longer bolts are not included and you'll need to verify that yours have the appropriate length. Stock bolts will typically be fine if only adding 3mm spacers but obviously I recommend using the correct length bolts. The price is $15/pair and shipping is a flat rate $5 via USPS. I have plenty of these available at this time. If you'd like to order, my paypal address is maurer.todd @ gmail . com (no spaces) - please include "3mm BMW Spacer Pair" and your shipping address in the payment details. If your payment method has a paypal fee associated, please add 3%. Let me know if you have any questions! Thanks guys. Last edited by toddman35; 10-30-2015 at 06:38 PM.. |
11-13-2015, 10:26 AM | #4 |
Banned
1
Rep 5
Posts |
With every wheel I've seen, yes. There may be some oddball wheel out there that has a chamfer larger than 7 mm, but I highly doubt it so you should be set.
|
Appreciate
0
|
Bookmarks |
|
|