[neilvosko]

Is anyone running rear spacers on square setup?

[TSM330i]

Originally Posted by neilvosko

Is anyone running rear spacers on square setup?

I run front and rear spacers on my track setup.

My wheels are Enkei RPF1 18x8.5 et40 and I run a 5mm spacer front and rear.
BFGoodrich R1 in 245/40-18.

[turugara]

Originally Posted by neilvosko

Is anyone running rear spacers on square setup?

18x9.5, 275/35/18 hankook rs3's. Running a 10mm spacer in the rear for effective +25 offset.

[neilvosko]

seems like 22 effective offset is the max/optimum ?

[neilvosko]

Thanks guys

[vwong]

Originally Posted by turugara

18x9.5, 275/35/18 hankook rs3's. Running a 10mm spacer in the rear for effective +25 offset.

Are you running 275 on 9.5" wheels in the fronts? What offset, and what camber setting?

[turugara]

Originally Posted by vwong

Are you running 275 on 9.5" wheels in the fronts? What offset, and what camber setting?

No no. Misunderstanding.
That's for rear.

Front is 255/35/18 on 9"

[neilvosko]

255s square = sweetspot

[UltraRacer13]

Originally Posted by neilvosko

255s square = sweetspot

THIS!!

[nkadisha]

Anyone running a 265 square?

[taibanl]

335d

Considering following upgrades (tracked once, planning on 1-3x/year):
1) BMW performance suspension (from stock/non-zsp)
2) Upgraded Wagner FMIC (1-2% hp boost, 23 degrees cooler, less heat soak
3) LSD (Quaife or maybe Wavetrak).

Thoughts?

[Mavus]

Originally Posted by taibanl

335d

Considering following upgrades (tracked once, planning on 1-3x/year):
1) BMW performance suspension (from stock/non-zsp)
2) Upgraded Wagner FMIC (1-2% hp boost, 23 degrees cooler, less heat soak
3) LSD (Quaife or maybe Wavetrak).

Thoughts?

1 and 3 are nice upgrades but ... you will open up a can of warms lol. Once I upgraded suspension I had to replace subframe bushings and it goes on ...

[UltraRacer13]

So an update to my setup-

AST 4100- run usually 6/10F 8/10R, but a work in progress
Vorshlag Plates, -2.0 Front -1.75 Rear
APEX ARC-8 17x9 Square
Nitto NT-01 255/40/17
StopTech Powerslot rotors w/ PFC-08 (love these pads!!)

I really like the alignment settings, getting even wear on tires. Still tweaking rebound settings.

[DallasBoosted]

Ground Control coilovers 525f/650r spring rates, dampers adjustments in the middle of the range f/r
Ground control camber plates, -3.3 degrees front -2.4 degrees rear, 1/8" total toe out in the front, 1/8" total toe in in the rear
UUC 27mm front 19mm rear swaybars, both on the softer of the two adjustment holes
Nitto NT01 255/40-17 front 275/40-17 rear tires on 17x9.5 et35 Arc-8's
Stoptech 355mm BBK front axle, PFC06 pads, stock rotors/pads/calipers rear
OS Giken Superlock LSD
Powerflex subframe/diff bushings
Stett Stage 2 oil cooler
downpipes/cat back exhaust/FMIC, Cobb stage 2+ FMIC tune

Running great so far, working on tightening the nut behind the wheel.

[will.c]

Originally Posted by DallasBoosted

Ground Control coilovers 525f/650r spring rates, dampers adjustments in the middle of the range f/r
Ground control camber plates, -3.3 degrees front -2.4 degrees rear, 1/8" total toe out in the front, 1/8" total toe in in the rear
UUC 27mm front 19mm rear swaybars, both on the softer of the two adjustment holes
Nitto NT01 255/40-17 front 275/40-17 rear tires on 17x9.5 et35 Arc-8's
Stoptech 355mm BBK front axle, PFC06 pads, stock rotors/pads/calipers rear
OS Giken Superlock LSD
Powerflex subframe/diff bushings
Stett Stage 2 oil cooler
downpipes/cat back exhaust/FMIC, Cobb stage 2+ FMIC tune

Running great so far, working on tightening the nut behind the wheel.

BEAST...

[kenneth]

Originally Posted by UltraRacer13

So an update to my setup-

AST 4100- run usually 6/10F 8/10R, but a work in progress
Vorshlag Plates, -2.0 Front -1.75 Rear
APEX ARC-8 17x9 Square
Nitto NT-01 255/40/17
StopTech Powerslot rotors w/ PFC-08 (love these pads!!)

I really like the alignment settings, getting even wear on tires. Still tweaking rebound settings.

Do your pads have the metal clip in the back? If not, do they vibrate like hell at medium/low speed?

[mid-corner fun]

Originally Posted by kenneth

Do your pads have the metal clip in the back? If not, do they vibrate like hell at medium/low speed?

Both PFC01 and PFC08 now come with clips, this was not the case previously. I'm starting this year with PFC08s as a test (instead of DTC70s)

[kenneth]

Originally Posted by mid-corner fun

Both PFC01 and PFC08 now come with clips, this was not the case previously. I'm starting this year with PFC08s as a test (instead of DTC70s)

Where do you folks order your PFC from? Thanks for the info.

My PFC 08 my mechanic had to fabricate a wedge to minimize the back and forth play, otherwise it sounded as someone hammering away repetitively at a piece of metal.

[CJ421]

Originally Posted by kenneth

Do your pads have the metal clip in the back? If not, do they vibrate like hell at medium/low speed?

I bought the PFC 08 when they were released, front and rear. It's good to hear the new ones are coming with clips on the front. Mine rattled like hell for a few months, then after a few track days and street driving, no rattling ...hmm.

[mid-corner fun]

Originally Posted by kenneth

Where do you folks order your PFC from? Thanks for the info.

My PFC 08 my mechanic had to fabricate a wedge to minimize the back and forth play, otherwise it sounded as someone hammering away repetitively at a piece of metal.

I know that sound very very well, the looks I used to get from other drivers on the way back from the track with PFC01s were priceless

I bought mine from Harold (hpashop) about a month ago.

[kenneth]

Originally Posted by mid-corner fun

I know that sound very very well, the looks I used to get from other drivers on the way back from the track with PFC01s were priceless

I bought mine from Harold (hpashop) about a month ago.

ha ha yes, and I drove in bumper to bumper traffic on the highway and tried not to make eye contact with drivers in the cars around me, lol! I even saw some nodding their heads in disbelief....

[kenneth]

Originally Posted by CJ421

I bought the PFC 08 when they were released, front and rear. It's good to hear the new ones are coming with clips on the front. Mine rattled like hell for a few months, then after a few track days and street driving, no rattling ...hmm.

I guess the track days must have evened the rotor surface flat and hence no more grabbing of the pad by the rotor.