[e90m3japan]

Thank you for the help! I really appreciate it!

Does this one work?!

http://cgi.ebay.com/ebaymotors/BMW-U...motiveQ5fTools

[AWLE902008]

Originally Posted by bumere90

Ok, so when I select MSV70.PRG it loads but nothing happens. Any suggestions? I really need to register my battery now, because I have been driving like that for 6 months and really strange things are happening to my car.

like what?

[sjones0812]

I can pull info from my car in INPA....in NCS I now can read the VIN but when I do the F1 then F3, pick CAS I get this error.

Following feature is invalid for FA: $2H8

Any ideas? Car is a 2011 e93 march build with comfort access if it makes any difference.

[AU335i]

Originally Posted by e90m3japan

Thank you for the help! I really appreciate it!

Does this one work?!

http://cgi.ebay.com/ebaymotors/BMW-U...motiveQ5fTools

there are cheaper ones, but im guessing that one should work

[pjaneiro]

Originally Posted by The_DDub

IT WORKS!!! Big arigato Toshisan! I will post a youtube vid up sometime. Pre LCI E90 AE as DRL!!

Did yo use TFL_S or DRL_S ?

thanks

[Neutrino45]

Use drl_s to activate AE as DRL. Module FRM (NFRM).

[pjaneiro]

Originally Posted by Neutrino45

Use drl_s to activate AE as DRL. Module FRM (NFRM).

I tried, i still have high beams as drl, I have a canadian version, can successfully shut them off or have high beams, that's it, but i read that dub used tfl_s, but wondering if it was a typo...

[Neutrino45]

So you've coded drl_s then toggled it off then on and high beam still lights up instead of AE? DRL was on by default when I coded my car. I had to turn DRL off then on before it would work.

[Neutrino45]

Originally Posted by e90m3japan

Thank you for the help! I really appreciate it!

Does this one work?!

http://cgi.ebay.com/ebaymotors/BMW-U...motiveQ5fTools

This is the recommended place to order your cable.

eBay: http://cgi.ebay.com/ebaymotors/ws/eB...m=200599686350
Shop: http://www.one-stop-electronics.com/...&product_id=16

[Neutrino45]

Originally Posted by sjones0812

I can pull info from my car in INPA....in NCS I now can read the VIN but when I do the F1 then F3, pick CAS I get this error.

Following feature is invalid for FA: $2H8

Any ideas? Car is a 2011 e93 march build with comfort access if it makes any difference.

Maybe the problem is with your cable? <delete>

Which cable are you using? Where and when did you buy it?

[pjaneiro]

Originally Posted by Neutrino45

So you've coded drl_s then toggled it off then on and high beam still lights up instead of AE? DRL was on by default when I coded my car. I had to turn DRL off then on before it would work.

Numerous times, when i disable the tagfarlight the highs are instatenuously turned off, as soon as i turn it on, the highs come back, i have modifed both

VERHALTEN_DRL_TFL
drl_s
VERHALTEN_DRL_TFL_3R
drl_s
to drl_s they were drl_h, tagfarlight was already enabled

This is a canadian Model

That is why i was wondering if maybe canadian models needed tfl_s instead of drl_s

[pjaneiro]

Originally Posted by pjaneiro

Numerous times, when i disable the tagfarlight the highs are instatenuously turned off, as soon as i turn it on, the highs come back, i have modifed both

VERHALTEN_DRL_TFL
drl_s
VERHALTEN_DRL_TFL_3R
drl_s
to drl_s they were drl_h, tagfarlight was already enabled

This is a canadian Model

That is why i was wondering if maybe canadian models needed tfl_s instead of drl_s

still worked on it last night, no progress

[Blindek]

anyone knows if it's posible to code the iDrive(CCC) so that when u turn off the display, the lower display(clock etc.) still stays on, like when u press arrow up on the steering wheel (see picture)

[mot]

Originally Posted by mot

It crashes my computer when I try to update the driver.

Also, according to the google doc spreadsheet the folding mirror option is only available for 2010 and 2011? I thought it had been successfully coded for all models?

anyone?

[taranonline]

Hi

would it be possible to have 5x turn signal instead of 3x or 1.

I hope you understand. I am talking when we do soft tap on the turn stalk.

[maximal]

Anyone help with this error when reading CTM?

[taranonline]

Originally Posted by maximal

Anyone help with this error when reading CTM?

it happens when the specific function isnt going to work on your car.

[Elliott@DetailAddict]

Originally Posted by maximal

Anyone help with this error when reading CTM?

Everyone, don't just post that error dialog. If you want REAL help, post the dialog AND the error log.

Most likely you misspelled a coding change somewhere, or you are missing a prg file.

Please post log.

[maximal]

The problem was missing prg file. Fixed.

[sjones0812]

Anyone able to code a post 3/2011 e93??

in NCS I now can read the VIN but when I do the F1 then F3, pick CAS I get this error.

Following feature is invalid for FA: $2H8

Any ideas?

[jphughan]

Originally Posted by sjones0812

Anyone able to code a post 3/2011 e93??

in NCS I now can read the VIN but when I do the F1 then F3, pick CAS I get this error.

Following feature is invalid for FA: $2H8

Any ideas?

I have a 3/11 E92 and can code most of its modules with V41 daten. I'd start by trying to find out what option 2H8 is.

[sjones0812]

Originally Posted by jphughan

I have a 3/11 E92 and can code most of its modules with V41 daten. I'd start by trying to find out what option 2H8 is.

How do I find out what version of daten I have...might be that I do not have the correct version.