Sponsored by The Tire Rack

[Aaron_N55]

I have a 2011 BMW E92 Coupe 335xi M-Sport. I'm looking for Varrstoen ES2 in 18" Matte Black. I'm looking to fit 235/40/18 an 265/35/18 Michelin Pilot Super Sports. I know they have to be re-drilled 5-120. I'm looking for a fitment that I wouldn't have to camber the car and little to no fender roll / shave with being as flush as possible. I believe the best rim size is 18x8.5 and 18x9.5 if I'm not mistaken. For the front they offer offsets 15, 25, 35 and 45. The rear is offered in 12, 22, and 30. I believe it would be 35 / 30 however I don't want to mess up the order.

[MonacoBlueE90]

Varsstoen doesn't have 8.5 wide and i don't see all those offset you listed. http://varrstoen.com/products/es-2/

But in your case 18x9.5 et30 front and 18x10.5 et30 rear. Should work just fine Will look almost like this http://www.e90post.com/forums/showthread.php?t=918889 Front will be 5mm more out and rear 1mm. Still needs fender roll to rear.

Or you could do 10.5 et22 rear, but it would require more work. This one has 18x9.5 et22 front and 18x10.5 et22 rear http://www.e90post.com/forums/showthread.php?t=894864

And if you don't want matte black wheels they can powder coat them to what you want.

[Aaron_N55]

Originally Posted by MonacoBlueE90

Varsstoen doesn't have 8.5 wide and i don't see all those offset you listed. http://varrstoen.com/products/es-2/

But in your case 18x9.5 et30 front and 18x10.5 et30 rear. Should work just fine Will look almost like this http://www.e90post.com/forums/showthread.php?t=918889 Front will be 5mm more out and rear 1mm. Still needs fender roll to rear.

Or you could do 10.5 et22 rear, but it would require more work. This one has 18x9.5 et22 front and 18x10.5 et22 rear http://www.e90post.com/forums/showthread.php?t=894864

And if you don't want matte black wheels they can powder coat them to what you want.

Getting it from http://unleashedwheels.com/varrstoen-es2.html its one of their vendors.

[bmw325i]

Originally Posted by MonacoBlueE90

But in your case 18x9.5 et30 front and 18x10.5 et30 rear. Should work just fine Will look almost like this http://www.e90post.com/forums/showthread.php?t=918889 Front will be 5mm more out and rear 1mm. Still needs fender roll to rear.

+1 those sizes should be perfectly flush.

[MonacoBlueE90]

Originally Posted by Aaron_N55

Getting it from http://unleashedwheels.com/varrstoen-es2.html its one of their vendors.

Willing to bet those are old info, if not and you want 18x8.5 front i would choose et25 and rear i would still get the 18x10.5 et30. I recommend asking directly from Varrstoen.

[Aaron_N55]

Originally Posted by bmw325i

+1 those sizes should be perfectly flush.

Thank a lot!

[Aaron_N55]

Originally Posted by MonacoBlueE90

Willing to bet those are old info, if not and you want 18x8.5 front i would choose et25 and rear i would still get the 18x10.5 et30. I recommend asking directly from Varrstoen.

I hope not. Tried contacting them but it seems they respond every 3 days