|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
FZD panel won't lock back in place
|
|
04-30-2016, 09:59 AM | #1 |
student
226
Rep 911
Posts |
FZD panel won't lock back in place
I pulled out my interior driver dome light panel (FZD) to do wiring.
I seem to have bent the 2 pins in the process. Anyway to get this back in or bend it back into shape or do I need to find another panel spare and take the pins out? |
05-02-2016, 04:19 AM | #2 |
student
226
Rep 911
Posts |
Update: I bent the pins back to the way they are supposed to be.
To do this I unscrewed the 4 star torx screws on the back of the FZD and the light housing dropped out. After that I used a flathead to push up the little prong holding the clips into the plastic FZD and pulled the clips out. Then I bent the clips with a plier to almost full U shape bend & put them back in. FZD clipped back in PERFECTLY. |
Appreciate
0
|
Bookmarks |
|
|