[jetpack30]

Forgive me if this has been addressed elsewhere, I've been searching and reading for days and was not able to resolve my question.

I have the base stereo in my 128i (no tweeters, etc.). I am adding an amp and was just wondering where the front door speakers' and floor speakers' wires "meet" for sharing their signal?

Thanks

[taibanl]

@ Underseats

[Pavlo]

why do you want to know?

[Aurich]

I don't have an exact pic of it, but you need to unbolt your seats to expose the speakers under them, and you can tap into what you need there, and then run the wires back through the seats to the trunk:



There's absolutely no point in adding an amp to the stock speaker setup though, so hopefully you have a larger plan in mind.

Edit: Oh, on re-reading your post you said 128i. No idea if it's the same, you're posting in a 3 series forum.

[taibanl]

Look here

http://www.1addicts.com/forums/showthread.php?t=634957

[jetpack30]

Originally Posted by Pavlo

why do you want to know?

I'm upgrading the system by adding an AMP, speakers, and a Cleansweep.

[jetpack30]

Originally Posted by Aurich

I don't have an exact pic of it, but you need to unbolt your seats to expose the speakers under them, and you can tap into what you need there, and then run the wires back through the seats to the trunk:



There's absolutely no point in adding an amp to the stock speaker setup though, so hopefully you have a larger plan in mind.

Edit: Oh, on re-reading your post you said 128i. No idea if it's the same, you're posting in a 3 series forum.

Thanks for the pic. Yeah I realized after I posted that I posted in the wrong forum.

[jetpack30]

Originally Posted by taibanl

Look here

http://www.1addicts.com/forums/showthread.php?t=634957

Thanks for the link, I read that thread and must have overlooked the image there.

Also, I followed your install link in your signature, great job.