[makkan00]

Hi
I have coded numerous cars and numerous HUs to hi-fi. I have D+Kcan cable and had no issues.

However I always had issues coding those HUs which come with built in BT (2010, 2011, 2012) cars. Each time I try to read 2RAD, it says module could not be read.

I have a feeling that such HUs can be only read / updated on most fibre.

Am I missing something? Any comments welcome.

Thanks.

[4EST]

they can be red, not written

[makkan00]

Originally Posted by 4EST

they can be red, not written

thanks.
I could not even read them.
whats the way forward to code them?

[4EST]

change VO accordingly, then sg_reset

[makkan00]

Originally Posted by 4EST

change VO accordingly, then sg_reset

Thanks.
But how to read them at the first place?

[4EST]

I can read them, but I don't have to. I just used different VO

[ctuna]

There was something about having the latest daten files.
And also when coding if they are using the new radio with the
the self contained usb/bluetooth/etc changing the production date
of the car, if its and older one, to one that covers the newer radio and new software so that it recognizes the new hardware and allows the new software to operate on an older car.

http://www.e90post.com/forums/showthread.php?t=687463

[makkan00]

Originally Posted by ctuna

There was something about having the latest daten files.
And also when coding if they are using the new radio with the
the self contained usb/bluetooth/etc changing the production date
of the car, if its and older one, to one that covers the newer radio and new software so that it recognizes the new hardware and allows the new software to operate on an older car.

http://www.e90post.com/forums/showthread.php?t=687463

Thanks.
Appreciate that.
I am trying to code late 2010-2012 cars which come with these HUs (bluetooth and usb built in) with D+K can cable but no avail.
Its to do with the cable or I am missing something.
As far as daten files are concerned, I am using most updated files.
The error which I encounter is 'module is not found or cannot connect to this module' something on those lines.

[4EST]

you can't code with MAN files newer HU with bluetooth, I have the same situation and I studied this issue a LONG time

the only solution is what I said before

[makkan00]

Originally Posted by 4EST

you can't code with MAN files newer HU with bluetooth, I have the same situation and I studied this issue a LONG time

the only solution is what I said before

My friend
I do not code HU with MAN files. Always changing VO.
Problem is that after changing VO when you try to code the HU, it gives error.
Tried on 3 different cars (2010, 11 and 12) and zero luck.
One thing was common that they all had BT built in.

[4EST]

after you change VO, SG_reset should reset the HU according to VO
IF SG_RESET from ncsexpert doesn't work, there is a similar command in tool32

[makkan00]

Originally Posted by 4EST

after you change VO, SG_reset should reset the HU according to VO
IF SG_RESET from ncsexpert doesn't work, there is a similar command in tool32

Thanks and will report back.