295's with 10MM spacers, I think 305's are doable! (pics)

robc1976 · 05-14-2013, 06:53 PM

Decided to I wanted my 295's pokeout more so added a 10MM spacer, shaved the fenders (3-4MM total thickness) and they fit great. I had to do a LOT of grinding on the rear section the most but they fit somehow LOL!! With that being said I think 305's can be done, I am, only at -1.8 camber.

Here are the pics

e90inAZ · 05-15-2013, 11:44 AM

That looks hot! I really want to do something similar to this...

What are your wheel and tire specs (295/30R19)? Fenders rolled and shaved?

Do you have a full rear shot?

07tundra · 05-15-2013, 12:02 PM

Looks really good Rob!

edirtaynine · 05-15-2013, 12:07 PM

wide tires look badass.

fyi, tires dont "poke"... that term is for wheel fitment - specifically the lip of the wheel.

robc1976 · 05-15-2013, 01:18 PM

Quote:

Originally Posted by e90inAZ

That looks hot! I really want to do something similar to this...

What are your wheel and tire specs (295/30R19)? Fenders rolled and shaved?

Do you have a full rear shot?

Thanks! They are a 42 offset with a 10MM spacer and a 295/25/20 with a fender shave.

robc1976 · 05-15-2013, 01:19 PM

Quote:

Originally Posted by 07tundra

Looks really good Rob!

Thanks man!

07tundra · 05-15-2013, 01:23 PM

My two front wheels came in today rears tomorrow. RB's hit the door also i think its Christmas.

Yeah put up a complete full rear shot of your car! Give me your email so I can send you a quick clip of my muffler delete tell what you think

robc1976 · 05-15-2013, 01:42 PM

Quote:

Originally Posted by 07tundra

My two front wheels came in today rears tomorrow. RB's hit the door also i think its Christmas.

Yeah put up a complete full rear shot of your car! Give me your email so I can send you a quick clip of my muffler delete tell what you think

I will, I have a muffler delete also....love it!

Here it is with 5MM spacer....the 10MM I have now make them look a lot better though.

e90inAZ · 05-15-2013, 01:53 PM

Quote:

Originally Posted by robc1976

Thanks! They are a 42 offset with a 10MM spacer and a 295/25/20 with a fender shave.

With the 10MM spacer, that makes the wheel offset a 32, right? 19x11" wheel? Any rubbing at your current ride height?

If you don't mind, what are your front wheel/tire specs?

Thank you!

robc1976 · 05-15-2013, 02:04 PM

Quote:

Originally Posted by e90inAZ

With the 10MM spacer, that makes the wheel offset a 32, right? 19x11" wheel? Any rubbing at your current ride height?

If you don't mind, what are your front wheel/tire specs?

Thank you!

It is a 10.5 wheel. No running since the shaving. My fronts are 20 X 9 with a 35 ET and a 245/30/20 with 5MM spacer.

SeanS54 · 05-15-2013, 02:51 PM

how did you shave the fenders? grinder? dremel?

robc1976 · 05-15-2013, 03:39 PM

Quote:

Originally Posted by CalBear_335i

how did you shave the fenders? grinder? dremel?

I put electrical tape to make the line where I wanted to cut, cut out fender lip....be sure to make sure paint does not get to hot. After you cut lip off start grinding/sanding (I used a dremel grinding stone).

You also need to do this:

http://www.e90post.com/forums/showthread.php?t=814434

SeanS54 · 05-15-2013, 05:55 PM

Quote:

Originally Posted by robc1976

I put electrical tape to make the line where I wanted to cut, cut out fender lip....be sure to make sure paint does not get to hot. After you cut lip off start grinding/sanding (I used a dremel grinding stone).

You also need to do this:

http://www.e90post.com/forums/showthread.php?t=814434

thanks. so cut with dremel?

robc1976 · 05-15-2013, 06:02 PM

Quote:

Originally Posted by CalBear_335i

thanks. so cut with dremel?

yes, use the quick connect with the high quality metal cutting disk...cuts it easily!

SeanS54 · 05-15-2013, 06:15 PM

Quote:

Originally Posted by robc1976

yes, use the quick connect with the high quality metal cutting disk...cuts it easily!

perfect, thanks

Dr. G · 05-15-2013, 09:29 PM

That is just so damn badass!!
You have a lot of room now for 305's.
17" wheels 305 drag radials + rb's = winn????

Quick Q, after shaving it down that much, have the two pieces of metal begun to separate at all or are they still nice and tight? I plan to cut mine, but knowing how far I can cut without them separating would be a huge help.

I'm still debating on whether to try it myself or have a shop do it.

robc1976 · 05-15-2013, 09:58 PM

Quote:

Originally Posted by Dr. G

That is just so damn badass!!
You have a lot of room now for 305's.
17" wheels 305 drag radials + rb's = winn????

Quick Q, after shaving it down that much, have the two pieces of metal begun to separate at all or are they still nice and tight? I plan to cut mine, but knowing how far I can cut without them separating would be a huge help.

I'm still debating on whether to try it myself or have a shop do it.

do it yourself man., not hard at all! I noticed something today...with me grinding I actually melted a lot of it together. This may sound cheap but "JB metal weld" may hold this in place. Mine is still nice and tight....like my wife!

Hybrid For Life · 05-16-2013, 03:52 AM

Quote:

Originally Posted by robc1976

do it yourself man., not hard at all! I noticed something today...with me grinding I actually melted a lot of it together. This may sound cheap but "JB metal weld" may hold this in place. Mine is still nice and tight....like my wife!

robc1976 · 05-16-2013, 06:36 AM

Quote:

Originally Posted by Hybrid For Life

I had to!

05-14-2013, 06:53 PM	#1
robc1976 DIYER 614 Rep 5,521 Posts Drives: E90 335i Join Date: Mar 2012 Location: Illinois iTrader: (14)	295's with 10MM spacers, I think 305's are doable! (pics) Decided to I wanted my 295's pokeout more so added a 10MM spacer, shaved the fenders (3-4MM total thickness) and they fit great. I had to do a LOT of grinding on the rear section the most but they fit somehow LOL!! With that being said I think 305's can be done, I am, only at -1.8 camber. Here are the pics __________________ JB4 G5, Stage 3 LPFP, Stage 2 MOTIV PI, VM 6466 ST, Custom OCC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms, M3 guide rods, M3 upper links, M3 front & rear sway-bars, HPA rear toe arms, Wavetrac LSD, HPF Gen 2, DEFIV kit, KW clubsport, Delrin solid SF bushings, stoptech rotors, Rogue Tranny Mounts, 1M bumper, M3 CF hood, M3 fenders, M3 OEM sideskirts, Mtech rear bumper, CSL trunk, MORR VS8.2 rims 245/295
	Appreciate 0 Tweet Quote

05-15-2013, 11:44 AM	#2
e90inAZ Private 7 Rep 65 Posts Drives: '14 S1000RR Join Date: Apr 2013 Location: Tucson, AZ iTrader: (0)	That looks hot! I really want to do something similar to this... What are your wheel and tire specs (295/30R19)? Fenders rolled and shaved? Do you have a full rear shot?
	Appreciate 0 Quote

05-15-2013, 12:02 PM	#3
07tundra Lieutenant Colonel 119 Rep 1,525 Posts Drives: 8.1L Chevy 2500hd Join Date: Jan 2012 Location: New Mexico iTrader: (9)	Looks really good Rob!
	Appreciate 0 Quote

05-15-2013, 12:07 PM	#4
edirtaynine Major General 81 Rep 6,092 Posts Drives: e92 Join Date: Mar 2011 Location: SoCal iTrader: (0)	wide tires look badass. fyi, tires dont "poke"... that term is for wheel fitment - specifically the lip of the wheel. __________________ e90post killed plastidip Just say no to painted stock wheels jm3as hooks it up
	Appreciate 0 Quote

05-15-2013, 01:23 PM	#7
07tundra Lieutenant Colonel 119 Rep 1,525 Posts Drives: 8.1L Chevy 2500hd Join Date: Jan 2012 Location: New Mexico iTrader: (9)	wheels My two front wheels came in today rears tomorrow. RB's hit the door also i think its Christmas. Yeah put up a complete full rear shot of your car! Give me your email so I can send you a quick clip of my muffler delete tell what you think
	Appreciate 0 Quote

05-15-2013, 02:51 PM	#11
SeanS54 Captain 168 Rep 842 Posts Drives: F82 M4 ZCP Join Date: Jan 2011 Location: Bay Area, CA iTrader: (20)	how did you shave the fenders? grinder? dremel? __________________ https://www.youtube.com/user/SeanS54/videos
	Appreciate 0 Quote

05-15-2013, 09:29 PM	#16
Dr. G Major General 278 Rep 5,062 Posts Drives: Black e92 335i Join Date: Apr 2010 Location: Brampton, Ontario iTrader: (32) Garage List e92 BMW 335i [8.84]	That is just so damn badass!! You have a lot of room now for 305's. 17" wheels 305 drag radials + rb's = winn???? Quick Q, after shaving it down that much, have the two pieces of metal begun to separate at all or are they still nice and tight? I plan to cut mine, but knowing how far I can cut without them separating would be a huge help. I'm still debating on whether to try it myself or have a shop do it. __________________ JB4 / OSS Angel Eyes / Downpipes / F1-Racewerks FMIC / Custom Meth Kit / BMS DCI / ER Chargepipe / HKS BOV / BMS Meth Elbow / BMW Performance Exhaust / Carbon Fiber Inlay Quad Tips / 19" Miro 111 / Front Aero Lip / M3 Sides / VRS CSL Trunk / Mtech Rear / DD CF Quad Finned Diffuser / LCI Tails / BBK / Smoked Reflectors / F1 Euphoria LED Interior / License LED's / GT 5000k Corners / 5000k HID Fogs / Air Scoops / LED Turn Signals / FK Silverline Coilovers / HPA endlinks / Vibrant Resonators / Osram CBI 5000k D1S
	Appreciate 0 Quote