[DimSum]

Originally Posted by Toshi

Mmm... Seems nobody likes the DRL taillight delete...

I used trial-and-error approach and... finally I found the code today!


"DRL_TFL_MIT_RL_BL_2" in NFRM change aktiv to nicht_aktiv

Now my E92 turns on the DRL with AEs only.
I updated the spreadsheet for those who are interested.

Congratulations Toshi-San!

[Randall41]

For all that purchased the USB/k+DECAN cable through EBay here is a link to the Correct drivers. Might cure most problems.

http://www.osefactory.com/tools/k+dcan/

[Technic]

Originally Posted by spazticrecords

@Technic

what did you set your car to?

It is in HiFi from Top HiFi (Individual Audio) right now as I have aftermarket amps.

[BabyBlack]

Will this be the cable that I need to coding for the 2011 model?
http://cgi.ebay.com/ebaymotors/ws/eB...TRK:MEBOFFX:IT

[Wissam]

Was anybody able to run NCSEXPERT on Windows 7 x64 without using things like VMWare or Windows 7 XP Mode?

[Amlethae]

Originally Posted by BabyBlack

Will this be the cable that I need to coding for the 2011 model?
http://cgi.ebay.com/ebaymotors/ws/eB...TRK:MEBOFFX:IT

Yes, you'll just need to pull it apart and break off PIN 8 (easier than desoldering)

[dr004]

Originally Posted by Wissam

Was anybody able to run NCSEXPERT on Windows 7 x64 without using things like VMWare or Windows 7 XP Mode?

i had no luck with Win 7 64bit. I partitioned my HD and loaded a 32 bit version. That's the only way I could get mine to work

[spera23]

Anyone know how to code the NFRM on an e92? It shows up as one of the 3 ECU Modules when I hit <F3> but does not show up as a module when i select "process ecu". Only one that shows up then is FRM.

[BabyBlack]

Originally Posted by Amlethae

Yes, you'll just need to pull it apart and break off PIN 8 (easier than desoldering)

Thank you

[bimal296]

Anyone know how to code Top Hifi in 2008 E92 CIC

Thx

[Technic]

Originally Posted by bimal296

Anyone know how to code Top Hifi in 2008 E92 CIC

Thx

I just added that to the database.

[bimal296]

Originally Posted by Technic

I just added that to the database.

AUDIO_SYSTEM_CIC hifi to top_hifi in 0ct 2008 E92 M3 CIC cuts off the
sound completely

I changed it in CIC module.

Can you help.I see modifications for 2009/2010/2011

Thx

[e90TiAg335i]

Originally Posted by Amlethae

Yes, you'll just need to pull it apart and break off PIN 8 (easier than desoldering)

You don't need to break off pin 8 except for cars equiped with ethernet. 1 and 3series do not have ethernet. I've verified with an 11 135 already.

[Technic]

Originally Posted by bimal296

AUDIO_SYSTEM_CIC hifi to top_hifi in 0ct 2008 E92 M3 CIC cuts off the
sound completely

I changed it in CIC module.

Can you help.I see modifications for 2009/2010/2011

Thx

Of course it will cut off the analog sound... you will need a MOST amp and new fiber optic harness.

[spazticrecords]

Does anyone have a 2010 + with an LMA module. I only have NRFM module and not LMA. I see in the spreadsheet someone posted positive results with 2010 and LMA module. I have stock Xenon's and I made a change for high beams and fogs at same time in NRFM module and it worked.

[bimal296]

Originally Posted by Technic

Of course it will cut off the analog sound... you will need a MOST amp and new fiber optic harness.

Thx

[bimal296]

Originally Posted by bimal296

My E92 M3 Defaults to Drivelogic D2(Euro Version)

Anyone knows how to change thro' NCS the Default as I
want it to default to D3 when I start the car without
having to use the M buttom

Thx

anyone found the way to change the Drivelogic settings.

Thx

[spazticrecords]

Updated DATEN files for CIC module for 2009 + cars. I uploaded another archive a while back, but some reported that other modules couldn't be read/write when replaced all files so I just found the CIC files instead of everything. These are just the files for the CIC. Replace with respective directories inside the achieve. There are 2 directories.

C:\NCSEXPERT\DATEN\E89
C:\EDIBIAS\ECU

Once replaced I was able to read and write all previous working modules + CIC. Please let me know if you have any questions and this works.

http://hotfile.com/dl/97282608/d8023...dated.rar.html

Pass: e90post

[spera23]

Does anyone know how to code the different welcome lights to activate when the car is unlocked?


WELCOME_LIGHTS in the CAPPL module seems to just give me a "welcome lights" option in the iDrive menu that does not change anything nor does it stay activated!

[Steveo]

Originally Posted by bimal296

anyone found the way to change the Drivelogic settings.

Thx

Would love to know this too,

When i connected last time to the car i had a play about and got the below on the screen, though didnt want to go changing anything in case it went tittts up!

[Noxious_]

Originally Posted by Wissam

Was anybody able to run NCSEXPERT on Windows 7 x64 without using things like VMWare or Windows 7 XP Mode?

I couldnt get it running without XP mode. If you need to upgrade Win 7 to ulitimate to get XP mode there is a keygen on the piratebay that will do it no problem (pm me for link). From there you can download virtual PC and XP mode.


I can get that far but when I try to run NCSEXPERT i get: CANNOT FIND APP.DLL

Did anyone else have this issue or is it just me. I know its related to a registry error but could not find the solution.

[GenePoole]

Originally Posted by Noxious_

I couldnt get it running without XP mode. If you need to upgrade Win 7 to ulitimate to get XP mode there is a keygen on the piratebay that will do it no problem (pm me for link). From there you can download virtual PC and XP mode.


I can get that far but when I try to run NCSEXPERT i get: CANNOT FIND APP.DLL

Did anyone else have this issue or is it just me. I know its related to a registry error but could not find the solution.

Are you sure it's not api.dll? That is a 16bit dll that NCSExpert need to talk to the 32 bit ediabas.