E90Post
 


TNT Racewerks
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Powertrain and Drivetrain Discussions > N54 Turbo Engine / Drivetrain / Exhaust Modifications - 335i > Installed JB3 last night, interesting issue during install



Reply
 
Thread Tools Search this Thread
      07-24-2010, 11:44 AM   #1
FirstBMWLA
Major
FirstBMWLA's Avatar
187
Rep
1,103
Posts

Drives: 2007 335i Coupe
Join Date: Oct 2007
Location: Dallas,TX

iTrader: (11)

Installed JB3 last night, interesting issue during install

So I installed the JB3 last night and was very careful to make sure all
wiring was correct. On first start of the car the car was stumbling, I could smell gas, and finally got a half engine light. I of course figured even though I was careful I somehow miswired something. During this time I tried restarting the car and got 1 somewhat long crank.

Before taking of all the connectors back out which is such a pain I decided to try putting the JB3 in "listen mode" and setting it to map 0. After setting it to map 0, the car started right up and seemed perfectly normal. After letting it run for a while I decided to try map 3. Switched the JB3 to map 3 and all still seemed normal. Drive the car for over an hr without a single code or any issue.

So really not sure what was going on with the JB3 to make going into program mode fix anything. I asked Terry about it and he didn't have much idea either of what would cause it to act that bad and then completely go away after changing maps.

I'm wondering if the engine stumbling and gas smell I experienced were the first signs of an upcoming HPFP issue. If so that would be quite the coincidence that I first saw the issue when putting the JB3 in. Anyway, knock on wood all seems well for now.

Anyone else experience anything similar when putting in a JB3.


Thanks
Appreciate 0
      07-24-2010, 03:50 PM   #2
645Nm
only in it for the torque - awuleth'umshini wami
645Nm's Avatar
South Africa
50
Rep
425
Posts

Drives: sapphire black 335i
Join Date: Apr 2009
Location: nomad

iTrader: (0)

Garage List
2009 335i sedan  [0.00]
2005 120D  [0.00]
2007 335i sedan  [0.00]
Nope...i assume you have the pin-out version?
My suggestion, take out and reinstall...something does not sound right...was the battery disconnected while installing?
__________________
Appreciate 0
      07-24-2010, 04:43 PM   #3
FirstBMWLA
Major
FirstBMWLA's Avatar
187
Rep
1,103
Posts

Drives: 2007 335i Coupe
Join Date: Oct 2007
Location: Dallas,TX

iTrader: (11)

I don't really plan on removing it at this point. It's running perfectly fine so I see no real reason. Just looking for possible cause of what I saw.
Appreciate 0
      07-24-2010, 04:49 PM   #4
jopa489
Major General
United_States
122
Rep
6,594
Posts

Drives: Anything with Wheels
Join Date: Mar 2009
Location: USA

iTrader: (9)

Might not even be related to the JB3. Starting and stopping an engine in quick succession leads to a buildup of gas in the engine. If you started it, then turned it off quickly even once you could experience the same symptom. By taking it out for a drive, you allowed the engine to warm up completely and burn off any excess gas. If it's not throwing codes now, don't worry about it much.
__________________

X7 LCI // Incoming
C7 ZR1 ZTK // Sebring + TRX // Hydro + Raptor Gen1 Roush // Tuxedo
Appreciate 0
      07-25-2010, 12:21 AM   #5
FirstBMWLA
Major
FirstBMWLA's Avatar
187
Rep
1,103
Posts

Drives: 2007 335i Coupe
Join Date: Oct 2007
Location: Dallas,TX

iTrader: (11)

After driving the car even more I'm feeling
Something slightly off. Feels like the car is lurching a bit almost like were hitting bumps. Not sure if that is a good word to describe it or not. Wondering if I've got a fuel pump on the way out.

No codes or anything else again yet though.
Appreciate 0
      07-25-2010, 12:35 AM   #6
newbieman78
Second Lieutenant
21
Rep
274
Posts

Drives: bmw 335i
Join Date: Nov 2008
Location: Las Vegas

iTrader: (0)

dude you screwed up...just man-up and reinstall it. don't be a baby
__________________
[SIGPIC][/SIGPIC]
Appreciate 0
      07-25-2010, 12:39 AM   #7
FirstBMWLA
Major
FirstBMWLA's Avatar
187
Rep
1,103
Posts

Drives: 2007 335i Coupe
Join Date: Oct 2007
Location: Dallas,TX

iTrader: (11)

Lol thanks for your help very constructive you are. So I managed to install it in some manner where everything seems to be running normal with no codes and I'm not even sure if what I feel is real or I'm just over analyzing it and looking for things. I'm sure thats it thanks!
Appreciate 0
      07-25-2010, 08:40 AM   #8
David 12
Major
David 12's Avatar
127
Rep
1,048
Posts

Drives: 2019 BMW X5 50i BSM, M Sport
Join Date: Jan 2007
Location: Omaha

iTrader: (0)

Email Mike or Terry - Get their advice and go from there ...

Something does not sound right to me.

Former car: 2007 335i JB3
Appreciate 0
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 06:21 AM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST