[tomasp001]

[EDIT: fixed everything, i just replaced both H3 bulbs and the high beam errors gone, disabled warm bulb monitoring for my headlights and the errors are gone.]

Greetings,

I did a pre-LCI Xenon adaptive to LCI Xenon adaptive headlight swap on my e90. I also retrofitted bavgruppe's Vision system w/ LED eye brow on my LCI xenon headlights. Now I am getting a high beam error.

Please keep in mind I did get these LCI xenon headlights used (I did not test them when I got them because I know the seller is reputable [bought from him before and everything works]). I did not get them brand new.

When I push the stalk away from me, the passenger headlight high beam turns on with bright white light but the driver side does not turn on at all.

When I push the stalk towards me, the driver side high beam turns on with a yellow light and the passenger side does not turn on.. I don't know what the problem is, can anyone shed any light on this?

For the angel eyes to work, I had a few things to code,


Turns signals only turn on when signalling
Voltage up to 13v
Turn off cold monitoring of bulbs

View post on imgur.com